| /* |
| * Copyright (c) 2010-2013, 2016 ARM Limited |
| * All rights reserved |
| * |
| * The license below extends only to copyright in the software and shall |
| * not be construed as granting a license to any other intellectual |
| * property including but not limited to intellectual property relating |
| * to a hardware implementation of the functionality of the software |
| * licensed hereunder. You may use the software subject to the license |
| * terms below provided that you ensure that this notice is replicated |
| * unmodified and in its entirety in all distributions of the software, |
| * modified or unmodified, in source code or in binary form. |
| * |
| * Copyright (c) 2002-2006 The Regents of The University of Michigan |
| * All rights reserved. |
| * |
| * Redistribution and use in source and binary forms, with or without |
| * modification, are permitted provided that the following conditions are |
| * met: redistributions of source code must retain the above copyright |
| * notice, this list of conditions and the following disclaimer; |
| * redistributions in binary form must reproduce the above copyright |
| * notice, this list of conditions and the following disclaimer in the |
| * documentation and/or other materials provided with the distribution; |
| * neither the name of the copyright holders nor the names of its |
| * contributors may be used to endorse or promote products derived from |
| * this software without specific prior written permission. |
| * |
| * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS |
| * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT |
| * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR |
| * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT |
| * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, |
| * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT |
| * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, |
| * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY |
| * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT |
| * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE |
| * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. |
| * |
| * Authors: Ali Saidi |
| */ |
| |
| #include "arch/arm/linux/system.hh" |
| |
| #include "arch/arm/isa_traits.hh" |
| #include "arch/arm/linux/atag.hh" |
| #include "arch/arm/utility.hh" |
| #include "arch/generic/linux/threadinfo.hh" |
| #include "base/loader/dtb_object.hh" |
| #include "base/loader/object_file.hh" |
| #include "base/loader/symtab.hh" |
| #include "cpu/base.hh" |
| #include "cpu/pc_event.hh" |
| #include "cpu/thread_context.hh" |
| #include "debug/Loader.hh" |
| #include "kern/linux/events.hh" |
| #include "kern/linux/helpers.hh" |
| #include "mem/fs_translating_port_proxy.hh" |
| #include "mem/physical.hh" |
| #include "sim/stat_control.hh" |
| |
| using namespace ArmISA; |
| using namespace Linux; |
| |
| LinuxArmSystem::LinuxArmSystem(Params *p) |
| : GenericArmSystem(p), dumpStatsPCEvent(nullptr), |
| enableContextSwitchStatsDump(p->enable_context_switch_stats_dump), |
| taskFile(nullptr), kernelPanicEvent(nullptr), kernelOopsEvent(nullptr) |
| { |
| const std::string dmesg_output = name() + ".dmesg"; |
| if (p->panic_on_panic) { |
| kernelPanicEvent = addKernelFuncEventOrPanic<Linux::KernelPanicEvent>( |
| "panic", "Kernel panic in simulated kernel", dmesg_output); |
| } else { |
| kernelPanicEvent = addKernelFuncEventOrPanic<Linux::DmesgDumpEvent>( |
| "panic", "Kernel panic in simulated kernel", dmesg_output); |
| } |
| |
| if (p->panic_on_oops) { |
| kernelOopsEvent = addKernelFuncEventOrPanic<Linux::KernelPanicEvent>( |
| "oops_exit", "Kernel oops in guest", dmesg_output); |
| } else { |
| kernelOopsEvent = addKernelFuncEventOrPanic<Linux::DmesgDumpEvent>( |
| "oops_exit", "Kernel oops in guest", dmesg_output); |
| } |
| |
| // With ARM udelay() is #defined to __udelay |
| // newer kernels use __loop_udelay and __loop_const_udelay symbols |
| uDelaySkipEvent = addKernelFuncEvent<UDelayEvent>( |
| "__loop_udelay", "__udelay", 1000, 0); |
| if (!uDelaySkipEvent) |
| uDelaySkipEvent = addKernelFuncEventOrPanic<UDelayEvent>( |
| "__udelay", "__udelay", 1000, 0); |
| |
| // constant arguments to udelay() have some precomputation done ahead of |
| // time. Constant comes from code. |
| constUDelaySkipEvent = addKernelFuncEvent<UDelayEvent>( |
| "__loop_const_udelay", "__const_udelay", 1000, 107374); |
| if (!constUDelaySkipEvent) |
| constUDelaySkipEvent = addKernelFuncEventOrPanic<UDelayEvent>( |
| "__const_udelay", "__const_udelay", 1000, 107374); |
| |
| } |
| |
| void |
| LinuxArmSystem::initState() |
| { |
| // Moved from the constructor to here since it relies on the |
| // address map being resolved in the interconnect |
| |
| // Call the initialisation of the super class |
| GenericArmSystem::initState(); |
| |
| // Load symbols at physical address, we might not want |
| // to do this permanently, for but early bootup work |
| // it is helpful. |
| if (params()->early_kernel_symbols) { |
| kernel->loadGlobalSymbols(kernelSymtab, 0, 0, loadAddrMask); |
| kernel->loadGlobalSymbols(debugSymbolTable, 0, 0, loadAddrMask); |
| } |
| |
| // Setup boot data structure |
| Addr addr = 0; |
| // Check if the kernel image has a symbol that tells us it supports |
| // device trees. |
| bool kernel_has_fdt_support = |
| kernelSymtab->findAddress("unflatten_device_tree", addr); |
| bool dtb_file_specified = params()->dtb_filename != ""; |
| |
| if (kernel_has_fdt_support && dtb_file_specified) { |
| // Kernel supports flattened device tree and dtb file specified. |
| // Using Device Tree Blob to describe system configuration. |
| inform("Loading DTB file: %s at address %#x\n", params()->dtb_filename, |
| params()->atags_addr + loadAddrOffset); |
| |
| ObjectFile *dtb_file = createObjectFile(params()->dtb_filename, true); |
| if (!dtb_file) { |
| fatal("couldn't load DTB file: %s\n", params()->dtb_filename); |
| } |
| |
| DtbObject *_dtb_file = dynamic_cast<DtbObject*>(dtb_file); |
| |
| if (_dtb_file) { |
| if (!_dtb_file->addBootCmdLine(params()->boot_osflags.c_str(), |
| params()->boot_osflags.size())) { |
| warn("couldn't append bootargs to DTB file: %s\n", |
| params()->dtb_filename); |
| } |
| } else { |
| warn("dtb_file cast failed; couldn't append bootargs " |
| "to DTB file: %s\n", params()->dtb_filename); |
| } |
| |
| dtb_file->setTextBase(params()->atags_addr + loadAddrOffset); |
| dtb_file->loadSections(physProxy); |
| delete dtb_file; |
| } else { |
| // Using ATAGS |
| // Warn if the kernel supports FDT and we haven't specified one |
| if (kernel_has_fdt_support) { |
| assert(!dtb_file_specified); |
| warn("Kernel supports device tree, but no DTB file specified\n"); |
| } |
| // Warn if the kernel doesn't support FDT and we have specified one |
| if (dtb_file_specified) { |
| assert(!kernel_has_fdt_support); |
| warn("DTB file specified, but no device tree support in kernel\n"); |
| } |
| |
| AtagCore ac; |
| ac.flags(1); // read-only |
| ac.pagesize(8192); |
| ac.rootdev(0); |
| |
| AddrRangeList atagRanges = physmem.getConfAddrRanges(); |
| if (atagRanges.size() != 1) { |
| fatal("Expected a single ATAG memory entry but got %d\n", |
| atagRanges.size()); |
| } |
| AtagMem am; |
| am.memSize(atagRanges.begin()->size()); |
| am.memStart(atagRanges.begin()->start()); |
| |
| AtagCmdline ad; |
| ad.cmdline(params()->boot_osflags); |
| |
| DPRINTF(Loader, "boot command line %d bytes: %s\n", |
| ad.size() <<2, params()->boot_osflags.c_str()); |
| |
| AtagNone an; |
| |
| uint32_t size = ac.size() + am.size() + ad.size() + an.size(); |
| uint32_t offset = 0; |
| uint8_t *boot_data = new uint8_t[size << 2]; |
| |
| offset += ac.copyOut(boot_data + offset); |
| offset += am.copyOut(boot_data + offset); |
| offset += ad.copyOut(boot_data + offset); |
| offset += an.copyOut(boot_data + offset); |
| |
| DPRINTF(Loader, "Boot atags was %d bytes in total\n", size << 2); |
| DDUMP(Loader, boot_data, size << 2); |
| |
| physProxy.writeBlob(params()->atags_addr + loadAddrOffset, boot_data, |
| size << 2); |
| |
| delete[] boot_data; |
| } |
| |
| // Kernel boot requirements to set up r0, r1 and r2 in ARMv7 |
| for (int i = 0; i < threadContexts.size(); i++) { |
| threadContexts[i]->setIntReg(0, 0); |
| threadContexts[i]->setIntReg(1, params()->machine_type); |
| threadContexts[i]->setIntReg(2, params()->atags_addr + loadAddrOffset); |
| } |
| } |
| |
| LinuxArmSystem::~LinuxArmSystem() |
| { |
| if (uDelaySkipEvent) |
| delete uDelaySkipEvent; |
| if (constUDelaySkipEvent) |
| delete constUDelaySkipEvent; |
| |
| if (dumpStatsPCEvent) |
| delete dumpStatsPCEvent; |
| } |
| |
| LinuxArmSystem * |
| LinuxArmSystemParams::create() |
| { |
| return new LinuxArmSystem(this); |
| } |
| |
| void |
| LinuxArmSystem::startup() |
| { |
| if (enableContextSwitchStatsDump) { |
| if (!highestELIs64()) { |
| dumpStatsPCEvent = |
| addKernelFuncEvent<DumpStatsPCEvent>("__switch_to"); |
| } else { |
| dumpStatsPCEvent = |
| addKernelFuncEvent<DumpStatsPCEvent64>("__switch_to"); |
| } |
| |
| if (!dumpStatsPCEvent) |
| panic("dumpStatsPCEvent not created!"); |
| |
| std::string task_filename = "tasks.txt"; |
| taskFile = simout.create(name() + "." + task_filename); |
| |
| for (const auto tc : threadContexts) { |
| uint32_t pid = tc->getCpuPtr()->getPid(); |
| if (pid != BaseCPU::invldPid) { |
| mapPid(tc, pid); |
| tc->getCpuPtr()->taskId(taskMap[pid]); |
| } |
| } |
| } |
| } |
| |
| void |
| LinuxArmSystem::mapPid(ThreadContext *tc, uint32_t pid) |
| { |
| // Create a new unique identifier for this pid |
| std::map<uint32_t, uint32_t>::iterator itr = taskMap.find(pid); |
| if (itr == taskMap.end()) { |
| uint32_t map_size = taskMap.size(); |
| if (map_size > ContextSwitchTaskId::MaxNormalTaskId + 1) { |
| warn_once("Error out of identifiers for cache occupancy stats"); |
| taskMap[pid] = ContextSwitchTaskId::Unknown; |
| } else { |
| taskMap[pid] = map_size; |
| } |
| } |
| } |
| |
| void |
| LinuxArmSystem::dumpDmesg() |
| { |
| Linux::dumpDmesg(getThreadContext(0), std::cout); |
| } |
| |
| /** |
| * Extracts the information used by the DumpStatsPCEvent by reading the |
| * thread_info pointer passed to __switch_to() in 32 bit ARM Linux |
| * |
| * r0 = task_struct of the previously running process |
| * r1 = thread_info of the previously running process |
| * r2 = thread_info of the next process to run |
| */ |
| void |
| DumpStatsPCEvent::getTaskDetails(ThreadContext *tc, uint32_t &pid, |
| uint32_t &tgid, std::string &next_task_str, int32_t &mm) { |
| |
| Linux::ThreadInfo ti(tc); |
| Addr task_descriptor = tc->readIntReg(2); |
| pid = ti.curTaskPID(task_descriptor); |
| tgid = ti.curTaskTGID(task_descriptor); |
| next_task_str = ti.curTaskName(task_descriptor); |
| |
| // Streamline treats pid == -1 as the kernel process. |
| // Also pid == 0 implies idle process (except during Linux boot) |
| mm = ti.curTaskMm(task_descriptor); |
| } |
| |
| /** |
| * Extracts the information used by the DumpStatsPCEvent64 by reading the |
| * task_struct pointer passed to __switch_to() in 64 bit ARM Linux |
| * |
| * r0 = task_struct of the previously running process |
| * r1 = task_struct of next process to run |
| */ |
| void |
| DumpStatsPCEvent64::getTaskDetails(ThreadContext *tc, uint32_t &pid, |
| uint32_t &tgid, std::string &next_task_str, int32_t &mm) { |
| |
| Linux::ThreadInfo ti(tc); |
| Addr task_struct = tc->readIntReg(1); |
| pid = ti.curTaskPIDFromTaskStruct(task_struct); |
| tgid = ti.curTaskTGIDFromTaskStruct(task_struct); |
| next_task_str = ti.curTaskNameFromTaskStruct(task_struct); |
| |
| // Streamline treats pid == -1 as the kernel process. |
| // Also pid == 0 implies idle process (except during Linux boot) |
| mm = ti.curTaskMmFromTaskStruct(task_struct); |
| } |
| |
| /** This function is called whenever the the kernel function |
| * "__switch_to" is called to change running tasks. |
| */ |
| void |
| DumpStatsPCEvent::process(ThreadContext *tc) |
| { |
| uint32_t pid = 0; |
| uint32_t tgid = 0; |
| std::string next_task_str; |
| int32_t mm = 0; |
| |
| getTaskDetails(tc, pid, tgid, next_task_str, mm); |
| |
| bool is_kernel = (mm == 0); |
| if (is_kernel && (pid != 0)) { |
| pid = -1; |
| tgid = -1; |
| next_task_str = "kernel"; |
| } |
| |
| LinuxArmSystem* sys = dynamic_cast<LinuxArmSystem *>(tc->getSystemPtr()); |
| if (!sys) { |
| panic("System is not LinuxArmSystem while getting Linux process info!"); |
| } |
| std::map<uint32_t, uint32_t>& taskMap = sys->taskMap; |
| |
| // Create a new unique identifier for this pid |
| sys->mapPid(tc, pid); |
| |
| // Set cpu task id, output process info, and dump stats |
| tc->getCpuPtr()->taskId(taskMap[pid]); |
| tc->getCpuPtr()->setPid(pid); |
| |
| OutputStream* taskFile = sys->taskFile; |
| |
| // Task file is read by cache occupancy plotting script or |
| // Streamline conversion script. |
| ccprintf(*(taskFile->stream()), |
| "tick=%lld %d cpu_id=%d next_pid=%d next_tgid=%d next_task=%s\n", |
| curTick(), taskMap[pid], tc->cpuId(), (int) pid, (int) tgid, |
| next_task_str); |
| taskFile->stream()->flush(); |
| |
| // Dump and reset statistics |
| Stats::schedStatEvent(true, true, curTick(), 0); |
| } |
| |