| /* |
| * Copyright (c) 2004-2005 The Regents of The University of Michigan |
| * All rights reserved. |
| * |
| * Redistribution and use in source and binary forms, with or without |
| * modification, are permitted provided that the following conditions are |
| * met: redistributions of source code must retain the above copyright |
| * notice, this list of conditions and the following disclaimer; |
| * redistributions in binary form must reproduce the above copyright |
| * notice, this list of conditions and the following disclaimer in the |
| * documentation and/or other materials provided with the distribution; |
| * neither the name of the copyright holders nor the names of its |
| * contributors may be used to endorse or promote products derived from |
| * this software without specific prior written permission. |
| * |
| * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS |
| * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT |
| * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR |
| * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT |
| * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, |
| * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT |
| * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, |
| * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY |
| * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT |
| * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE |
| * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. |
| * |
| * Authors: Kevin Lim |
| * Korey Sewell |
| */ |
| |
| #ifndef __CPU_O3_CPU_HH__ |
| #define __CPU_O3_CPU_HH__ |
| |
| #include <iostream> |
| #include <list> |
| #include <queue> |
| #include <set> |
| #include <vector> |
| |
| #include "arch/types.hh" |
| #include "base/statistics.hh" |
| #include "base/timebuf.hh" |
| #include "config/full_system.hh" |
| #include "config/the_isa.hh" |
| #include "config/use_checker.hh" |
| #include "cpu/activity.hh" |
| #include "cpu/base.hh" |
| #include "cpu/simple_thread.hh" |
| #include "cpu/o3/comm.hh" |
| #include "cpu/o3/cpu_policy.hh" |
| #include "cpu/o3/scoreboard.hh" |
| #include "cpu/o3/thread_state.hh" |
| //#include "cpu/o3/thread_context.hh" |
| #include "sim/process.hh" |
| |
| #include "params/DerivO3CPU.hh" |
| |
| template <class> |
| class Checker; |
| class ThreadContext; |
| template <class> |
| class O3ThreadContext; |
| |
| class Checkpoint; |
| class MemObject; |
| class Process; |
| |
| class BaseCPUParams; |
| |
| class BaseO3CPU : public BaseCPU |
| { |
| //Stuff that's pretty ISA independent will go here. |
| public: |
| BaseO3CPU(BaseCPUParams *params); |
| |
| void regStats(); |
| }; |
| |
| /** |
| * FullO3CPU class, has each of the stages (fetch through commit) |
| * within it, as well as all of the time buffers between stages. The |
| * tick() function for the CPU is defined here. |
| */ |
| template <class Impl> |
| class FullO3CPU : public BaseO3CPU |
| { |
| public: |
| // Typedefs from the Impl here. |
| typedef typename Impl::CPUPol CPUPolicy; |
| typedef typename Impl::DynInstPtr DynInstPtr; |
| typedef typename Impl::O3CPU O3CPU; |
| |
| typedef O3ThreadState<Impl> ImplState; |
| typedef O3ThreadState<Impl> Thread; |
| |
| typedef typename std::list<DynInstPtr>::iterator ListIt; |
| |
| friend class O3ThreadContext<Impl>; |
| |
| public: |
| enum Status { |
| Running, |
| Idle, |
| Halted, |
| Blocked, |
| SwitchedOut |
| }; |
| |
| TheISA::TLB * itb; |
| TheISA::TLB * dtb; |
| |
| /** Overall CPU status. */ |
| Status _status; |
| |
| /** Per-thread status in CPU, used for SMT. */ |
| Status _threadStatus[Impl::MaxThreads]; |
| |
| private: |
| class TickEvent : public Event |
| { |
| private: |
| /** Pointer to the CPU. */ |
| FullO3CPU<Impl> *cpu; |
| |
| public: |
| /** Constructs a tick event. */ |
| TickEvent(FullO3CPU<Impl> *c); |
| |
| /** Processes a tick event, calling tick() on the CPU. */ |
| void process(); |
| /** Returns the description of the tick event. */ |
| const char *description() const; |
| }; |
| |
| /** The tick event used for scheduling CPU ticks. */ |
| TickEvent tickEvent; |
| |
| /** Schedule tick event, regardless of its current state. */ |
| void scheduleTickEvent(int delay) |
| { |
| if (tickEvent.squashed()) |
| reschedule(tickEvent, nextCycle(curTick + ticks(delay))); |
| else if (!tickEvent.scheduled()) |
| schedule(tickEvent, nextCycle(curTick + ticks(delay))); |
| } |
| |
| /** Unschedule tick event, regardless of its current state. */ |
| void unscheduleTickEvent() |
| { |
| if (tickEvent.scheduled()) |
| tickEvent.squash(); |
| } |
| |
| class ActivateThreadEvent : public Event |
| { |
| private: |
| /** Number of Thread to Activate */ |
| ThreadID tid; |
| |
| /** Pointer to the CPU. */ |
| FullO3CPU<Impl> *cpu; |
| |
| public: |
| /** Constructs the event. */ |
| ActivateThreadEvent(); |
| |
| /** Initialize Event */ |
| void init(int thread_num, FullO3CPU<Impl> *thread_cpu); |
| |
| /** Processes the event, calling activateThread() on the CPU. */ |
| void process(); |
| |
| /** Returns the description of the event. */ |
| const char *description() const; |
| }; |
| |
| /** Schedule thread to activate , regardless of its current state. */ |
| void |
| scheduleActivateThreadEvent(ThreadID tid, int delay) |
| { |
| // Schedule thread to activate, regardless of its current state. |
| if (activateThreadEvent[tid].squashed()) |
| reschedule(activateThreadEvent[tid], |
| nextCycle(curTick + ticks(delay))); |
| else if (!activateThreadEvent[tid].scheduled()) |
| schedule(activateThreadEvent[tid], |
| nextCycle(curTick + ticks(delay))); |
| } |
| |
| /** Unschedule actiavte thread event, regardless of its current state. */ |
| void |
| unscheduleActivateThreadEvent(ThreadID tid) |
| { |
| if (activateThreadEvent[tid].scheduled()) |
| activateThreadEvent[tid].squash(); |
| } |
| |
| /** The tick event used for scheduling CPU ticks. */ |
| ActivateThreadEvent activateThreadEvent[Impl::MaxThreads]; |
| |
| class DeallocateContextEvent : public Event |
| { |
| private: |
| /** Number of Thread to deactivate */ |
| ThreadID tid; |
| |
| /** Should the thread be removed from the CPU? */ |
| bool remove; |
| |
| /** Pointer to the CPU. */ |
| FullO3CPU<Impl> *cpu; |
| |
| public: |
| /** Constructs the event. */ |
| DeallocateContextEvent(); |
| |
| /** Initialize Event */ |
| void init(int thread_num, FullO3CPU<Impl> *thread_cpu); |
| |
| /** Processes the event, calling activateThread() on the CPU. */ |
| void process(); |
| |
| /** Sets whether the thread should also be removed from the CPU. */ |
| void setRemove(bool _remove) { remove = _remove; } |
| |
| /** Returns the description of the event. */ |
| const char *description() const; |
| }; |
| |
| /** Schedule cpu to deallocate thread context.*/ |
| void |
| scheduleDeallocateContextEvent(ThreadID tid, bool remove, int delay) |
| { |
| // Schedule thread to activate, regardless of its current state. |
| if (deallocateContextEvent[tid].squashed()) |
| reschedule(deallocateContextEvent[tid], |
| nextCycle(curTick + ticks(delay))); |
| else if (!deallocateContextEvent[tid].scheduled()) |
| schedule(deallocateContextEvent[tid], |
| nextCycle(curTick + ticks(delay))); |
| } |
| |
| /** Unschedule thread deallocation in CPU */ |
| void |
| unscheduleDeallocateContextEvent(ThreadID tid) |
| { |
| if (deallocateContextEvent[tid].scheduled()) |
| deallocateContextEvent[tid].squash(); |
| } |
| |
| /** The tick event used for scheduling CPU ticks. */ |
| DeallocateContextEvent deallocateContextEvent[Impl::MaxThreads]; |
| |
| public: |
| /** Constructs a CPU with the given parameters. */ |
| FullO3CPU(DerivO3CPUParams *params); |
| /** Destructor. */ |
| ~FullO3CPU(); |
| |
| /** Registers statistics. */ |
| void regStats(); |
| |
| void demapPage(Addr vaddr, uint64_t asn) |
| { |
| this->itb->demapPage(vaddr, asn); |
| this->dtb->demapPage(vaddr, asn); |
| } |
| |
| void demapInstPage(Addr vaddr, uint64_t asn) |
| { |
| this->itb->demapPage(vaddr, asn); |
| } |
| |
| void demapDataPage(Addr vaddr, uint64_t asn) |
| { |
| this->dtb->demapPage(vaddr, asn); |
| } |
| |
| /** Returns a specific port. */ |
| Port *getPort(const std::string &if_name, int idx); |
| |
| /** Ticks CPU, calling tick() on each stage, and checking the overall |
| * activity to see if the CPU should deschedule itself. |
| */ |
| void tick(); |
| |
| /** Initialize the CPU */ |
| void init(); |
| |
| /** Returns the Number of Active Threads in the CPU */ |
| int numActiveThreads() |
| { return activeThreads.size(); } |
| |
| /** Add Thread to Active Threads List */ |
| void activateThread(ThreadID tid); |
| |
| /** Remove Thread from Active Threads List */ |
| void deactivateThread(ThreadID tid); |
| |
| /** Setup CPU to insert a thread's context */ |
| void insertThread(ThreadID tid); |
| |
| /** Remove all of a thread's context from CPU */ |
| void removeThread(ThreadID tid); |
| |
| /** Count the Total Instructions Committed in the CPU. */ |
| virtual Counter totalInstructions() const; |
| |
| /** Add Thread to Active Threads List. */ |
| void activateContext(ThreadID tid, int delay); |
| |
| /** Remove Thread from Active Threads List */ |
| void suspendContext(ThreadID tid); |
| |
| /** Remove Thread from Active Threads List && |
| * Possibly Remove Thread Context from CPU. |
| */ |
| bool deallocateContext(ThreadID tid, bool remove, int delay = 1); |
| |
| /** Remove Thread from Active Threads List && |
| * Remove Thread Context from CPU. |
| */ |
| void haltContext(ThreadID tid); |
| |
| /** Activate a Thread When CPU Resources are Available. */ |
| void activateWhenReady(ThreadID tid); |
| |
| /** Add or Remove a Thread Context in the CPU. */ |
| void doContextSwitch(); |
| |
| /** Update The Order In Which We Process Threads. */ |
| void updateThreadPriority(); |
| |
| /** Serialize state. */ |
| virtual void serialize(std::ostream &os); |
| |
| /** Unserialize from a checkpoint. */ |
| virtual void unserialize(Checkpoint *cp, const std::string §ion); |
| |
| public: |
| #if !FULL_SYSTEM |
| /** Executes a syscall. |
| * @todo: Determine if this needs to be virtual. |
| */ |
| void syscall(int64_t callnum, ThreadID tid); |
| #endif |
| |
| /** Starts draining the CPU's pipeline of all instructions in |
| * order to stop all memory accesses. */ |
| virtual unsigned int drain(Event *drain_event); |
| |
| /** Resumes execution after a drain. */ |
| virtual void resume(); |
| |
| /** Signals to this CPU that a stage has completed switching out. */ |
| void signalDrained(); |
| |
| /** Switches out this CPU. */ |
| virtual void switchOut(); |
| |
| /** Takes over from another CPU. */ |
| virtual void takeOverFrom(BaseCPU *oldCPU); |
| |
| /** Get the current instruction sequence number, and increment it. */ |
| InstSeqNum getAndIncrementInstSeq() |
| { return globalSeqNum++; } |
| |
| /** Traps to handle given fault. */ |
| void trap(Fault fault, ThreadID tid); |
| |
| #if FULL_SYSTEM |
| /** HW return from error interrupt. */ |
| Fault hwrei(ThreadID tid); |
| |
| bool simPalCheck(int palFunc, ThreadID tid); |
| |
| /** Returns the Fault for any valid interrupt. */ |
| Fault getInterrupts(); |
| |
| /** Processes any an interrupt fault. */ |
| void processInterrupts(Fault interrupt); |
| |
| /** Halts the CPU. */ |
| void halt() { panic("Halt not implemented!\n"); } |
| |
| /** Update the Virt and Phys ports of all ThreadContexts to |
| * reflect change in memory connections. */ |
| void updateMemPorts(); |
| |
| /** Check if this address is a valid instruction address. */ |
| bool validInstAddr(Addr addr) { return true; } |
| |
| /** Check if this address is a valid data address. */ |
| bool validDataAddr(Addr addr) { return true; } |
| #endif |
| |
| /** Register accessors. Index refers to the physical register index. */ |
| |
| /** Reads a miscellaneous register. */ |
| TheISA::MiscReg readMiscRegNoEffect(int misc_reg, ThreadID tid); |
| |
| /** Reads a misc. register, including any side effects the read |
| * might have as defined by the architecture. |
| */ |
| TheISA::MiscReg readMiscReg(int misc_reg, ThreadID tid); |
| |
| /** Sets a miscellaneous register. */ |
| void setMiscRegNoEffect(int misc_reg, const TheISA::MiscReg &val, |
| ThreadID tid); |
| |
| /** Sets a misc. register, including any side effects the write |
| * might have as defined by the architecture. |
| */ |
| void setMiscReg(int misc_reg, const TheISA::MiscReg &val, |
| ThreadID tid); |
| |
| uint64_t readIntReg(int reg_idx); |
| |
| TheISA::FloatReg readFloatReg(int reg_idx); |
| |
| TheISA::FloatRegBits readFloatRegBits(int reg_idx); |
| |
| void setIntReg(int reg_idx, uint64_t val); |
| |
| void setFloatReg(int reg_idx, TheISA::FloatReg val); |
| |
| void setFloatRegBits(int reg_idx, TheISA::FloatRegBits val); |
| |
| uint64_t readArchIntReg(int reg_idx, ThreadID tid); |
| |
| float readArchFloatReg(int reg_idx, ThreadID tid); |
| |
| uint64_t readArchFloatRegInt(int reg_idx, ThreadID tid); |
| |
| /** Architectural register accessors. Looks up in the commit |
| * rename table to obtain the true physical index of the |
| * architected register first, then accesses that physical |
| * register. |
| */ |
| void setArchIntReg(int reg_idx, uint64_t val, ThreadID tid); |
| |
| void setArchFloatReg(int reg_idx, float val, ThreadID tid); |
| |
| void setArchFloatRegInt(int reg_idx, uint64_t val, ThreadID tid); |
| |
| /** Reads the commit PC of a specific thread. */ |
| Addr readPC(ThreadID tid); |
| |
| /** Sets the commit PC of a specific thread. */ |
| void setPC(Addr new_PC, ThreadID tid); |
| |
| /** Reads the commit micro PC of a specific thread. */ |
| Addr readMicroPC(ThreadID tid); |
| |
| /** Sets the commmit micro PC of a specific thread. */ |
| void setMicroPC(Addr new_microPC, ThreadID tid); |
| |
| /** Reads the next PC of a specific thread. */ |
| Addr readNextPC(ThreadID tid); |
| |
| /** Sets the next PC of a specific thread. */ |
| void setNextPC(Addr val, ThreadID tid); |
| |
| /** Reads the next NPC of a specific thread. */ |
| Addr readNextNPC(ThreadID tid); |
| |
| /** Sets the next NPC of a specific thread. */ |
| void setNextNPC(Addr val, ThreadID tid); |
| |
| /** Reads the commit next micro PC of a specific thread. */ |
| Addr readNextMicroPC(ThreadID tid); |
| |
| /** Sets the commit next micro PC of a specific thread. */ |
| void setNextMicroPC(Addr val, ThreadID tid); |
| |
| /** Initiates a squash of all in-flight instructions for a given |
| * thread. The source of the squash is an external update of |
| * state through the TC. |
| */ |
| void squashFromTC(ThreadID tid); |
| |
| /** Function to add instruction onto the head of the list of the |
| * instructions. Used when new instructions are fetched. |
| */ |
| ListIt addInst(DynInstPtr &inst); |
| |
| /** Function to tell the CPU that an instruction has completed. */ |
| void instDone(ThreadID tid); |
| |
| /** Add Instructions to the CPU Remove List*/ |
| void addToRemoveList(DynInstPtr &inst); |
| |
| /** Remove an instruction from the front end of the list. There's |
| * no restriction on location of the instruction. |
| */ |
| void removeFrontInst(DynInstPtr &inst); |
| |
| /** Remove all instructions that are not currently in the ROB. |
| * There's also an option to not squash delay slot instructions.*/ |
| void removeInstsNotInROB(ThreadID tid); |
| |
| /** Remove all instructions younger than the given sequence number. */ |
| void removeInstsUntil(const InstSeqNum &seq_num, ThreadID tid); |
| |
| /** Removes the instruction pointed to by the iterator. */ |
| inline void squashInstIt(const ListIt &instIt, ThreadID tid); |
| |
| /** Cleans up all instructions on the remove list. */ |
| void cleanUpRemovedInsts(); |
| |
| /** Debug function to print all instructions on the list. */ |
| void dumpInsts(); |
| |
| public: |
| #ifndef NDEBUG |
| /** Count of total number of dynamic instructions in flight. */ |
| int instcount; |
| #endif |
| |
| /** List of all the instructions in flight. */ |
| std::list<DynInstPtr> instList; |
| |
| /** List of all the instructions that will be removed at the end of this |
| * cycle. |
| */ |
| std::queue<ListIt> removeList; |
| |
| #ifdef DEBUG |
| /** Debug structure to keep track of the sequence numbers still in |
| * flight. |
| */ |
| std::set<InstSeqNum> snList; |
| #endif |
| |
| /** Records if instructions need to be removed this cycle due to |
| * being retired or squashed. |
| */ |
| bool removeInstsThisCycle; |
| |
| protected: |
| /** The fetch stage. */ |
| typename CPUPolicy::Fetch fetch; |
| |
| /** The decode stage. */ |
| typename CPUPolicy::Decode decode; |
| |
| /** The dispatch stage. */ |
| typename CPUPolicy::Rename rename; |
| |
| /** The issue/execute/writeback stages. */ |
| typename CPUPolicy::IEW iew; |
| |
| /** The commit stage. */ |
| typename CPUPolicy::Commit commit; |
| |
| /** The register file. */ |
| typename CPUPolicy::RegFile regFile; |
| |
| /** The free list. */ |
| typename CPUPolicy::FreeList freeList; |
| |
| /** The rename map. */ |
| typename CPUPolicy::RenameMap renameMap[Impl::MaxThreads]; |
| |
| /** The commit rename map. */ |
| typename CPUPolicy::RenameMap commitRenameMap[Impl::MaxThreads]; |
| |
| /** The re-order buffer. */ |
| typename CPUPolicy::ROB rob; |
| |
| /** Active Threads List */ |
| std::list<ThreadID> activeThreads; |
| |
| /** Integer Register Scoreboard */ |
| Scoreboard scoreboard; |
| |
| TheISA::ISA isa[Impl::MaxThreads]; |
| |
| public: |
| /** Enum to give each stage a specific index, so when calling |
| * activateStage() or deactivateStage(), they can specify which stage |
| * is being activated/deactivated. |
| */ |
| enum StageIdx { |
| FetchIdx, |
| DecodeIdx, |
| RenameIdx, |
| IEWIdx, |
| CommitIdx, |
| NumStages }; |
| |
| /** Typedefs from the Impl to get the structs that each of the |
| * time buffers should use. |
| */ |
| typedef typename CPUPolicy::TimeStruct TimeStruct; |
| |
| typedef typename CPUPolicy::FetchStruct FetchStruct; |
| |
| typedef typename CPUPolicy::DecodeStruct DecodeStruct; |
| |
| typedef typename CPUPolicy::RenameStruct RenameStruct; |
| |
| typedef typename CPUPolicy::IEWStruct IEWStruct; |
| |
| /** The main time buffer to do backwards communication. */ |
| TimeBuffer<TimeStruct> timeBuffer; |
| |
| /** The fetch stage's instruction queue. */ |
| TimeBuffer<FetchStruct> fetchQueue; |
| |
| /** The decode stage's instruction queue. */ |
| TimeBuffer<DecodeStruct> decodeQueue; |
| |
| /** The rename stage's instruction queue. */ |
| TimeBuffer<RenameStruct> renameQueue; |
| |
| /** The IEW stage's instruction queue. */ |
| TimeBuffer<IEWStruct> iewQueue; |
| |
| private: |
| /** The activity recorder; used to tell if the CPU has any |
| * activity remaining or if it can go to idle and deschedule |
| * itself. |
| */ |
| ActivityRecorder activityRec; |
| |
| public: |
| /** Records that there was time buffer activity this cycle. */ |
| void activityThisCycle() { activityRec.activity(); } |
| |
| /** Changes a stage's status to active within the activity recorder. */ |
| void activateStage(const StageIdx idx) |
| { activityRec.activateStage(idx); } |
| |
| /** Changes a stage's status to inactive within the activity recorder. */ |
| void deactivateStage(const StageIdx idx) |
| { activityRec.deactivateStage(idx); } |
| |
| /** Wakes the CPU, rescheduling the CPU if it's not already active. */ |
| void wakeCPU(); |
| |
| #if FULL_SYSTEM |
| virtual void wakeup(); |
| #endif |
| |
| /** Gets a free thread id. Use if thread ids change across system. */ |
| ThreadID getFreeTid(); |
| |
| public: |
| /** Returns a pointer to a thread context. */ |
| ThreadContext * |
| tcBase(ThreadID tid) |
| { |
| return thread[tid]->getTC(); |
| } |
| |
| /** The global sequence number counter. */ |
| InstSeqNum globalSeqNum;//[Impl::MaxThreads]; |
| |
| #if USE_CHECKER |
| /** Pointer to the checker, which can dynamically verify |
| * instruction results at run time. This can be set to NULL if it |
| * is not being used. |
| */ |
| Checker<DynInstPtr> *checker; |
| #endif |
| |
| #if FULL_SYSTEM |
| /** Pointer to the system. */ |
| System *system; |
| #endif |
| |
| /** Event to call process() on once draining has completed. */ |
| Event *drainEvent; |
| |
| /** Counter of how many stages have completed draining. */ |
| int drainCount; |
| |
| /** Pointers to all of the threads in the CPU. */ |
| std::vector<Thread *> thread; |
| |
| /** Whether or not the CPU should defer its registration. */ |
| bool deferRegistration; |
| |
| /** Is there a context switch pending? */ |
| bool contextSwitch; |
| |
| /** Threads Scheduled to Enter CPU */ |
| std::list<int> cpuWaitList; |
| |
| /** The cycle that the CPU was last running, used for statistics. */ |
| Tick lastRunningCycle; |
| |
| /** The cycle that the CPU was last activated by a new thread*/ |
| Tick lastActivatedCycle; |
| |
| /** Mapping for system thread id to cpu id */ |
| std::map<ThreadID, unsigned> threadMap; |
| |
| /** Available thread ids in the cpu*/ |
| std::vector<ThreadID> tids; |
| |
| /** CPU read function, forwards read to LSQ. */ |
| template <class T> |
| Fault read(RequestPtr &req, RequestPtr &sreqLow, RequestPtr &sreqHigh, |
| T &data, int load_idx) |
| { |
| return this->iew.ldstQueue.read(req, sreqLow, sreqHigh, |
| data, load_idx); |
| } |
| |
| /** CPU write function, forwards write to LSQ. */ |
| template <class T> |
| Fault write(RequestPtr &req, RequestPtr &sreqLow, RequestPtr &sreqHigh, |
| T &data, int store_idx) |
| { |
| return this->iew.ldstQueue.write(req, sreqLow, sreqHigh, |
| data, store_idx); |
| } |
| |
| /** Get the dcache port (used to find block size for translations). */ |
| Port *getDcachePort() { return this->iew.ldstQueue.getDcachePort(); } |
| |
| Addr lockAddr; |
| |
| /** Temporary fix for the lock flag, works in the UP case. */ |
| bool lockFlag; |
| |
| /** Stat for total number of times the CPU is descheduled. */ |
| Stats::Scalar timesIdled; |
| /** Stat for total number of cycles the CPU spends descheduled. */ |
| Stats::Scalar idleCycles; |
| /** Stat for the number of committed instructions per thread. */ |
| Stats::Vector committedInsts; |
| /** Stat for the total number of committed instructions. */ |
| Stats::Scalar totalCommittedInsts; |
| /** Stat for the CPI per thread. */ |
| Stats::Formula cpi; |
| /** Stat for the total CPI. */ |
| Stats::Formula totalCpi; |
| /** Stat for the IPC per thread. */ |
| Stats::Formula ipc; |
| /** Stat for the total IPC. */ |
| Stats::Formula totalIpc; |
| }; |
| |
| #endif // __CPU_O3_CPU_HH__ |