configs/dram/low_power_sweep.py - amd/gem5 - Git at Google

 # Copyright (c) 2014-2015, 2017 ARM Limited
 # All rights reserved.
 #
 # The license below extends only to copyright in the software and shall
 # not be construed as granting a license to any other intellectual
 # property including but not limited to intellectual property relating
 # to a hardware implementation of the functionality of the software
 # licensed hereunder.  You may use the software subject to the license
 # terms below provided that you ensure that this notice is replicated
 # unmodified and in its entirety in all distributions of the software,
 # modified or unmodified, in source code or in binary form.
 #
 # Redistribution and use in source and binary forms, with or without
 # modification, are permitted provided that the following conditions are
 # met: redistributions of source code must retain the above copyright
 # notice, this list of conditions and the following disclaimer;
 # redistributions in binary form must reproduce the above copyright
 # notice, this list of conditions and the following disclaimer in the
 # documentation and/or other materials provided with the distribution;
 # neither the name of the copyright holders nor the names of its
 # contributors may be used to endorse or promote products derived from
 # this software without specific prior written permission.
 #
 # THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
 # "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
 # LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
 # A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
 # OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
 # SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
 # LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
 # DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
 # THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
 # (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
 # OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 #
 # Authors: Radhika Jagtap
 #          Andreas Hansson

 from __future__ import print_function

 import argparse

 import m5
 from m5.objects import *
 from m5.util import addToPath
 from m5.stats import periodicStatDump

 addToPath(os.getcwd() + '/configs/common')
 import MemConfig

 # This script aims at triggering low power state transitions in the DRAM
 # controller. The traffic generator is used in DRAM mode and traffic
 # states target a different levels of bank utilization and strides.
 # At the end after sweeping through bank utilization and strides, we go
 # through an idle state with no requests to enforce self-refresh.

 parser = argparse.ArgumentParser(
   formatter_class=argparse.ArgumentDefaultsHelpFormatter)

 # Use a single-channel DDR4-2400 in 16x4 configuration by default
 parser.add_argument("--mem-type", default="DDR4_2400_16x4",
                     choices=MemConfig.mem_names(),
                     help = "type of memory to use")

 parser.add_argument("--mem-ranks", "-r", type=int, default=1,
                     help = "Number of ranks to iterate across")

 parser.add_argument("--page-policy", "-p",
                     choices=["close_adaptive", "open_adaptive"],
                     default="close_adaptive", help="controller page policy")

 parser.add_argument("--itt-list", "-t", default="1 20 100",
                     help="a list of multipliers for the max value of itt, " \
                     "e.g. \"1 20 100\"")

 parser.add_argument("--rd-perc", type=int, default=100,
                     help = "Percentage of read commands")

 parser.add_argument("--addr-map", type=int, default=1,
                     help = "0: RoCoRaBaCh; 1: RoRaBaCoCh/RoRaBaChCo")

 parser.add_argument("--idle-end", type=int, default=50000000,
                     help = "time in ps of an idle period at the end ")

 args = parser.parse_args()

 # Start with the system itself, using a multi-layer 2.0 GHz
 # crossbar, delivering 64 bytes / 3 cycles (one header cycle)
 # which amounts to 42.7 GByte/s per layer and thus per port.
 system = System(membus = IOXBar(width = 32))
 system.clk_domain = SrcClockDomain(clock = '2.0GHz',
                                    voltage_domain =
                                    VoltageDomain(voltage = '1V'))

 # We are fine with 256 MB memory for now.
 mem_range = AddrRange('256MB')
 # Start address is 0
 system.mem_ranges = [mem_range]

 # Do not worry about reserving space for the backing store
 system.mmap_using_noreserve = True

 # Force a single channel to match the assumptions in the DRAM traffic
 # generator
 args.mem_channels = 1
 args.external_memory_system = 0
 args.tlm_memory = 0
 args.elastic_trace_en = 0
 MemConfig.config_mem(args, system)

 # Sanity check for memory controller class.
 if not isinstance(system.mem_ctrls[0], m5.objects.DRAMCtrl):
     fatal("This script assumes the memory is a DRAMCtrl subclass")

 # There is no point slowing things down by saving any data.
 system.mem_ctrls[0].null = True

 # Set the address mapping based on input argument
 # Default to RoRaBaCoCh
 if args.addr_map == 0:
    system.mem_ctrls[0].addr_mapping = "RoCoRaBaCh"
 elif args.addr_map == 1:
    system.mem_ctrls[0].addr_mapping = "RoRaBaCoCh"
 else:
     fatal("Did not specify a valid address map argument")

 system.mem_ctrls[0].page_policy = args.page_policy

 # We create a traffic generator state for each param combination we want to
 # test. Each traffic generator state is specified in the config file and the
 # generator remains in the state for specific period. This period is 0.25 ms.
 # Stats are dumped and reset at the state transition.
 period = 250000000

 # We specify the states in a config file input to the traffic generator.
 cfg_file_name = "configs/dram/lowp_sweep.cfg"
 cfg_file = open(cfg_file_name, 'w')

 # Get the number of banks
 nbr_banks = int(system.mem_ctrls[0].banks_per_rank.value)

 # determine the burst size in bytes
 burst_size = int((system.mem_ctrls[0].devices_per_rank.value *
                   system.mem_ctrls[0].device_bus_width.value *
                   system.mem_ctrls[0].burst_length.value) / 8)

 # next, get the page size in bytes (the rowbuffer size is already in bytes)
 page_size = system.mem_ctrls[0].devices_per_rank.value * \
     system.mem_ctrls[0].device_rowbuffer_size.value

 # Inter-request delay should be such that we can hit as many transitions
 # to/from low power states as possible to. We provide a min and max itt to the
 # traffic generator and it randomises in the range. The parameter is in
 # seconds and we need it in ticks (ps).
 itt_min = system.mem_ctrls[0].tBURST.value * 1000000000000

 #The itt value when set to (tRAS + tRP + tCK) covers the case where
 # a read command is delayed beyond the delay from ACT to PRE_PDN entry of the
 # previous command. For write command followed by precharge, this delay
 # between a write and power down entry will be tRCD + tCL + tWR + tRP + tCK.
 # As we use this delay as a unit and create multiples of it as bigger delays
 # for the sweep, this parameter works for reads, writes and mix of them.
 pd_entry_time = (system.mem_ctrls[0].tRAS.value +
                  system.mem_ctrls[0].tRP.value +
                  system.mem_ctrls[0].tCK.value) * 1000000000000

 # We sweep itt max using the multipliers specified by the user.
 itt_max_str = args.itt_list.strip().split()
 itt_max_multiples = map(lambda x : int(x), itt_max_str)
 if len(itt_max_multiples) == 0:
     fatal("String for itt-max-list detected empty\n")

 itt_max_values = map(lambda m : pd_entry_time * m, itt_max_multiples)

 # Generate request addresses in the entire range, assume we start at 0
 max_addr = mem_range.end

 # For max stride, use min of the page size and 512 bytes as that should be
 # more than enough
 max_stride = min(512, page_size)
 mid_stride = 4 * burst_size
 stride_values = [burst_size, mid_stride, max_stride]

 # be selective about bank utilization instead of going from 1 to the number of
 # banks
 bank_util_values = [1, int(nbr_banks/2), nbr_banks]

 # Next we create the config file, but first a comment
 cfg_file.write("""# STATE state# period mode=DRAM
 # read_percent start_addr end_addr req_size min_itt max_itt data_limit
 # stride_size page_size #banks #banks_util addr_map #ranks\n""")

 nxt_state = 0
 for itt_max in itt_max_values:
     for bank in bank_util_values:
         for stride_size in stride_values:
             cfg_file.write("STATE %d %d %s %d 0 %d %d "
                            "%d %d %d %d %d %d %d %d %d\n" %
                            (nxt_state, period, "DRAM", args.rd_perc, max_addr,
                             burst_size, itt_min, itt_max, 0, stride_size,
                             page_size, nbr_banks, bank, args.addr_map,
                             args.mem_ranks))
             nxt_state = nxt_state + 1

 # State for idle period
 idle_period = args.idle_end
 cfg_file.write("STATE %d %d IDLE\n" % (nxt_state, idle_period))

 # Init state is state 0
 cfg_file.write("INIT 0\n")

 # Go through the states one by one
 for state in range(1, nxt_state + 1):
     cfg_file.write("TRANSITION %d %d 1\n" % (state - 1, state))

 # Transition from last state to itself to not break the probability math
 cfg_file.write("TRANSITION %d %d 1\n" % (nxt_state, nxt_state))
 cfg_file.close()

 # create a traffic generator, and point it to the file we just created
 system.tgen = TrafficGen(config_file = cfg_file_name)

 # add a communication monitor
 system.monitor = CommMonitor()

 # connect the traffic generator to the bus via a communication monitor
 system.tgen.port = system.monitor.slave
 system.monitor.master = system.membus.slave

 # connect the system port even if it is not used in this example
 system.system_port = system.membus.slave

 # every period, dump and reset all stats
 periodicStatDump(period)

 root = Root(full_system = False, system = system)
 root.system.mem_mode = 'timing'

 m5.instantiate()

 # Simulate for exactly as long as it takes to go through all the states
 # This is why sim exists.
 m5.simulate(nxt_state * period + idle_period)
 print("--- Done DRAM low power sweep ---")
 print("Fixed params - ")
 print("\tburst: %d, banks: %d, max stride: %d, itt min: %s ns" %  \
   (burst_size, nbr_banks, max_stride, itt_min))
 print("Swept params - ")
 print("\titt max multiples input:", itt_max_multiples)
 print("\titt max values", itt_max_values)
 print("\tbank utilization values", bank_util_values)
 print("\tstride values:", stride_values)
 print("Traffic gen config file:", cfg_file_name)
	# Copyright (c) 2014-2015, 2017 ARM Limited
	# All rights reserved.
	#
	# The license below extends only to copyright in the software and shall
	# not be construed as granting a license to any other intellectual
	# property including but not limited to intellectual property relating
	# to a hardware implementation of the functionality of the software
	# licensed hereunder. You may use the software subject to the license
	# terms below provided that you ensure that this notice is replicated
	# unmodified and in its entirety in all distributions of the software,
	# modified or unmodified, in source code or in binary form.
	#
	# Redistribution and use in source and binary forms, with or without
	# modification, are permitted provided that the following conditions are
	# met: redistributions of source code must retain the above copyright
	# notice, this list of conditions and the following disclaimer;
	# redistributions in binary form must reproduce the above copyright
	# notice, this list of conditions and the following disclaimer in the
	# documentation and/or other materials provided with the distribution;
	# neither the name of the copyright holders nor the names of its
	# contributors may be used to endorse or promote products derived from
	# this software without specific prior written permission.
	#
	# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
	# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
	# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
	# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
	# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
	# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
	# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
	# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
	# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
	# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
	# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
	#
	# Authors: Radhika Jagtap
	# Andreas Hansson

	from __future__ import print_function

	import argparse

	import m5
	from m5.objects import *
	from m5.util import addToPath
	from m5.stats import periodicStatDump

	addToPath(os.getcwd() + '/configs/common')
	import MemConfig

	# This script aims at triggering low power state transitions in the DRAM
	# controller. The traffic generator is used in DRAM mode and traffic
	# states target a different levels of bank utilization and strides.
	# At the end after sweeping through bank utilization and strides, we go
	# through an idle state with no requests to enforce self-refresh.

	parser = argparse.ArgumentParser(
	formatter_class=argparse.ArgumentDefaultsHelpFormatter)

	# Use a single-channel DDR4-2400 in 16x4 configuration by default
	parser.add_argument("--mem-type", default="DDR4_2400_16x4",
	choices=MemConfig.mem_names(),
	help = "type of memory to use")

	parser.add_argument("--mem-ranks", "-r", type=int, default=1,
	help = "Number of ranks to iterate across")

	parser.add_argument("--page-policy", "-p",
	choices=["close_adaptive", "open_adaptive"],
	default="close_adaptive", help="controller page policy")

	parser.add_argument("--itt-list", "-t", default="1 20 100",
	help="a list of multipliers for the max value of itt, " \
	"e.g. \"1 20 100\"")

	parser.add_argument("--rd-perc", type=int, default=100,
	help = "Percentage of read commands")

	parser.add_argument("--addr-map", type=int, default=1,
	help = "0: RoCoRaBaCh; 1: RoRaBaCoCh/RoRaBaChCo")

	parser.add_argument("--idle-end", type=int, default=50000000,
	help = "time in ps of an idle period at the end ")

	args = parser.parse_args()

	# Start with the system itself, using a multi-layer 2.0 GHz
	# crossbar, delivering 64 bytes / 3 cycles (one header cycle)
	# which amounts to 42.7 GByte/s per layer and thus per port.
	system = System(membus = IOXBar(width = 32))
	system.clk_domain = SrcClockDomain(clock = '2.0GHz',
	voltage_domain =
	VoltageDomain(voltage = '1V'))

	# We are fine with 256 MB memory for now.
	mem_range = AddrRange('256MB')
	# Start address is 0
	system.mem_ranges = [mem_range]

	# Do not worry about reserving space for the backing store
	system.mmap_using_noreserve = True

	# Force a single channel to match the assumptions in the DRAM traffic
	# generator
	args.mem_channels = 1
	args.external_memory_system = 0
	args.tlm_memory = 0
	args.elastic_trace_en = 0
	MemConfig.config_mem(args, system)

	# Sanity check for memory controller class.
	if not isinstance(system.mem_ctrls[0], m5.objects.DRAMCtrl):
	fatal("This script assumes the memory is a DRAMCtrl subclass")

	# There is no point slowing things down by saving any data.
	system.mem_ctrls[0].null = True

	# Set the address mapping based on input argument
	# Default to RoRaBaCoCh
	if args.addr_map == 0:
	system.mem_ctrls[0].addr_mapping = "RoCoRaBaCh"
	elif args.addr_map == 1:
	system.mem_ctrls[0].addr_mapping = "RoRaBaCoCh"
	else:
	fatal("Did not specify a valid address map argument")

	system.mem_ctrls[0].page_policy = args.page_policy

	# We create a traffic generator state for each param combination we want to
	# test. Each traffic generator state is specified in the config file and the
	# generator remains in the state for specific period. This period is 0.25 ms.
	# Stats are dumped and reset at the state transition.
	period = 250000000

	# We specify the states in a config file input to the traffic generator.
	cfg_file_name = "configs/dram/lowp_sweep.cfg"
	cfg_file = open(cfg_file_name, 'w')

	# Get the number of banks
	nbr_banks = int(system.mem_ctrls[0].banks_per_rank.value)

	# determine the burst size in bytes
	burst_size = int((system.mem_ctrls[0].devices_per_rank.value *
	system.mem_ctrls[0].device_bus_width.value *
	system.mem_ctrls[0].burst_length.value) / 8)

	# next, get the page size in bytes (the rowbuffer size is already in bytes)
	page_size = system.mem_ctrls[0].devices_per_rank.value * \
	system.mem_ctrls[0].device_rowbuffer_size.value

	# Inter-request delay should be such that we can hit as many transitions
	# to/from low power states as possible to. We provide a min and max itt to the
	# traffic generator and it randomises in the range. The parameter is in
	# seconds and we need it in ticks (ps).
	itt_min = system.mem_ctrls[0].tBURST.value * 1000000000000

	#The itt value when set to (tRAS + tRP + tCK) covers the case where
	# a read command is delayed beyond the delay from ACT to PRE_PDN entry of the
	# previous command. For write command followed by precharge, this delay
	# between a write and power down entry will be tRCD + tCL + tWR + tRP + tCK.
	# As we use this delay as a unit and create multiples of it as bigger delays
	# for the sweep, this parameter works for reads, writes and mix of them.
	pd_entry_time = (system.mem_ctrls[0].tRAS.value +
	system.mem_ctrls[0].tRP.value +
	system.mem_ctrls[0].tCK.value) * 1000000000000

	# We sweep itt max using the multipliers specified by the user.
	itt_max_str = args.itt_list.strip().split()
	itt_max_multiples = map(lambda x : int(x), itt_max_str)
	if len(itt_max_multiples) == 0:
	fatal("String for itt-max-list detected empty\n")

	itt_max_values = map(lambda m : pd_entry_time * m, itt_max_multiples)

	# Generate request addresses in the entire range, assume we start at 0
	max_addr = mem_range.end

	# For max stride, use min of the page size and 512 bytes as that should be
	# more than enough
	max_stride = min(512, page_size)
	mid_stride = 4 * burst_size
	stride_values = [burst_size, mid_stride, max_stride]

	# be selective about bank utilization instead of going from 1 to the number of
	# banks
	bank_util_values = [1, int(nbr_banks/2), nbr_banks]

	# Next we create the config file, but first a comment
	cfg_file.write("""# STATE state# period mode=DRAM
	# read_percent start_addr end_addr req_size min_itt max_itt data_limit
	# stride_size page_size #banks #banks_util addr_map #ranks\n""")

	nxt_state = 0
	for itt_max in itt_max_values:
	for bank in bank_util_values:
	for stride_size in stride_values:
	cfg_file.write("STATE %d %d %s %d 0 %d %d "
	"%d %d %d %d %d %d %d %d %d\n" %
	(nxt_state, period, "DRAM", args.rd_perc, max_addr,
	burst_size, itt_min, itt_max, 0, stride_size,
	page_size, nbr_banks, bank, args.addr_map,
	args.mem_ranks))
	nxt_state = nxt_state + 1

	# State for idle period
	idle_period = args.idle_end
	cfg_file.write("STATE %d %d IDLE\n" % (nxt_state, idle_period))

	# Init state is state 0
	cfg_file.write("INIT 0\n")

	# Go through the states one by one
	for state in range(1, nxt_state + 1):
	cfg_file.write("TRANSITION %d %d 1\n" % (state - 1, state))

	# Transition from last state to itself to not break the probability math
	cfg_file.write("TRANSITION %d %d 1\n" % (nxt_state, nxt_state))
	cfg_file.close()

	# create a traffic generator, and point it to the file we just created
	system.tgen = TrafficGen(config_file = cfg_file_name)

	# add a communication monitor
	system.monitor = CommMonitor()

	# connect the traffic generator to the bus via a communication monitor
	system.tgen.port = system.monitor.slave
	system.monitor.master = system.membus.slave

	# connect the system port even if it is not used in this example
	system.system_port = system.membus.slave

	# every period, dump and reset all stats
	periodicStatDump(period)

	root = Root(full_system = False, system = system)
	root.system.mem_mode = 'timing'

	m5.instantiate()

	# Simulate for exactly as long as it takes to go through all the states
	# This is why sim exists.
	m5.simulate(nxt_state * period + idle_period)
	print("--- Done DRAM low power sweep ---")
	print("Fixed params - ")
	print("\tburst: %d, banks: %d, max stride: %d, itt min: %s ns" % \
	(burst_size, nbr_banks, max_stride, itt_min))
	print("Swept params - ")
	print("\titt max multiples input:", itt_max_multiples)
	print("\titt max values", itt_max_values)
	print("\tbank utilization values", bank_util_values)
	print("\tstride values:", stride_values)
	print("Traffic gen config file:", cfg_file_name)