| /* |
| * Copyright (c) 2012 ARM Limited |
| * All rights reserved |
| * |
| * The license below extends only to copyright in the software and shall |
| * not be construed as granting a license to any other intellectual |
| * property including but not limited to intellectual property relating |
| * to a hardware implementation of the functionality of the software |
| * licensed hereunder. You may use the software subject to the license |
| * terms below provided that you ensure that this notice is replicated |
| * unmodified and in its entirety in all distributions of the software, |
| * modified or unmodified, in source code or in binary form. |
| * |
| * Copyright (c) 2007 MIPS Technologies, Inc. |
| * All rights reserved. |
| * |
| * Redistribution and use in source and binary forms, with or without |
| * modification, are permitted provided that the following conditions are |
| * met: redistributions of source code must retain the above copyright |
| * notice, this list of conditions and the following disclaimer; |
| * redistributions in binary form must reproduce the above copyright |
| * notice, this list of conditions and the following disclaimer in the |
| * documentation and/or other materials provided with the distribution; |
| * neither the name of the copyright holders nor the names of its |
| * contributors may be used to endorse or promote products derived from |
| * this software without specific prior written permission. |
| * |
| * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS |
| * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT |
| * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR |
| * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT |
| * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, |
| * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT |
| * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, |
| * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY |
| * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT |
| * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE |
| * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. |
| * |
| * Authors: Korey Sewell |
| * |
| */ |
| |
| #include <algorithm> |
| |
| #include "arch/utility.hh" |
| #include "base/bigint.hh" |
| #include "config/the_isa.hh" |
| #include "cpu/inorder/resources/cache_unit.hh" |
| #include "cpu/inorder/resources/resource_list.hh" |
| #include "cpu/inorder/cpu.hh" |
| #include "cpu/inorder/first_stage.hh" |
| #include "cpu/inorder/inorder_dyn_inst.hh" |
| #include "cpu/inorder/pipeline_traits.hh" |
| #include "cpu/inorder/resource_pool.hh" |
| #include "cpu/inorder/thread_context.hh" |
| #include "cpu/inorder/thread_state.hh" |
| #include "cpu/activity.hh" |
| #include "cpu/base.hh" |
| #include "cpu/exetrace.hh" |
| #include "cpu/quiesce_event.hh" |
| #include "cpu/simple_thread.hh" |
| #include "cpu/thread_context.hh" |
| #include "debug/Activity.hh" |
| #include "debug/InOrderCPU.hh" |
| #include "debug/InOrderCachePort.hh" |
| #include "debug/Interrupt.hh" |
| #include "debug/Quiesce.hh" |
| #include "debug/RefCount.hh" |
| #include "debug/SkedCache.hh" |
| #include "params/InOrderCPU.hh" |
| #include "sim/full_system.hh" |
| #include "sim/process.hh" |
| #include "sim/stat_control.hh" |
| #include "sim/system.hh" |
| |
| #if THE_ISA == ALPHA_ISA |
| #include "arch/alpha/osfpal.hh" |
| #endif |
| |
| using namespace std; |
| using namespace TheISA; |
| using namespace ThePipeline; |
| |
| InOrderCPU::CachePort::CachePort(CacheUnit *_cacheUnit) : |
| CpuPort(_cacheUnit->name() + "-cache-port", _cacheUnit->cpu), |
| cacheUnit(_cacheUnit) |
| { } |
| |
| bool |
| InOrderCPU::CachePort::recvTiming(Packet *pkt) |
| { |
| if (pkt->isError()) |
| DPRINTF(InOrderCachePort, "Got error packet back for address: %x\n", |
| pkt->getAddr()); |
| else if (pkt->isResponse()) |
| cacheUnit->processCacheCompletion(pkt); |
| else { |
| //@note: depending on consistency model, update here |
| DPRINTF(InOrderCachePort, "Received snoop pkt %x,Ignoring\n", |
| pkt->getAddr()); |
| } |
| |
| return true; |
| } |
| |
| void |
| InOrderCPU::CachePort::recvRetry() |
| { |
| cacheUnit->recvRetry(); |
| } |
| |
| InOrderCPU::TickEvent::TickEvent(InOrderCPU *c) |
| : Event(CPU_Tick_Pri), cpu(c) |
| { } |
| |
| |
| void |
| InOrderCPU::TickEvent::process() |
| { |
| cpu->tick(); |
| } |
| |
| |
| const char * |
| InOrderCPU::TickEvent::description() const |
| { |
| return "InOrderCPU tick event"; |
| } |
| |
| InOrderCPU::CPUEvent::CPUEvent(InOrderCPU *_cpu, CPUEventType e_type, |
| Fault fault, ThreadID _tid, DynInstPtr inst, |
| CPUEventPri event_pri) |
| : Event(event_pri), cpu(_cpu) |
| { |
| setEvent(e_type, fault, _tid, inst); |
| } |
| |
| |
| std::string InOrderCPU::eventNames[NumCPUEvents] = |
| { |
| "ActivateThread", |
| "ActivateNextReadyThread", |
| "DeactivateThread", |
| "HaltThread", |
| "SuspendThread", |
| "Trap", |
| "Syscall", |
| "SquashFromMemStall", |
| "UpdatePCs" |
| }; |
| |
| void |
| InOrderCPU::CPUEvent::process() |
| { |
| switch (cpuEventType) |
| { |
| case ActivateThread: |
| cpu->activateThread(tid); |
| cpu->resPool->activateThread(tid); |
| break; |
| |
| case ActivateNextReadyThread: |
| cpu->activateNextReadyThread(); |
| break; |
| |
| case DeactivateThread: |
| cpu->deactivateThread(tid); |
| cpu->resPool->deactivateThread(tid); |
| break; |
| |
| case HaltThread: |
| cpu->haltThread(tid); |
| cpu->resPool->deactivateThread(tid); |
| break; |
| |
| case SuspendThread: |
| cpu->suspendThread(tid); |
| cpu->resPool->suspendThread(tid); |
| break; |
| |
| case SquashFromMemStall: |
| cpu->squashDueToMemStall(inst->squashingStage, inst->seqNum, tid); |
| cpu->resPool->squashDueToMemStall(inst, inst->squashingStage, |
| inst->seqNum, tid); |
| break; |
| |
| case Trap: |
| DPRINTF(InOrderCPU, "Trapping CPU\n"); |
| cpu->trap(fault, tid, inst); |
| cpu->resPool->trap(fault, tid, inst); |
| cpu->trapPending[tid] = false; |
| break; |
| |
| case Syscall: |
| cpu->syscall(inst->syscallNum, tid); |
| cpu->resPool->trap(fault, tid, inst); |
| break; |
| |
| default: |
| fatal("Unrecognized Event Type %s", eventNames[cpuEventType]); |
| } |
| |
| cpu->cpuEventRemoveList.push(this); |
| } |
| |
| |
| |
| const char * |
| InOrderCPU::CPUEvent::description() const |
| { |
| return "InOrderCPU event"; |
| } |
| |
| void |
| InOrderCPU::CPUEvent::scheduleEvent(int delay) |
| { |
| assert(!scheduled() || squashed()); |
| cpu->reschedule(this, cpu->nextCycle(curTick() + cpu->ticks(delay)), true); |
| } |
| |
| void |
| InOrderCPU::CPUEvent::unscheduleEvent() |
| { |
| if (scheduled()) |
| squash(); |
| } |
| |
| InOrderCPU::InOrderCPU(Params *params) |
| : BaseCPU(params), |
| cpu_id(params->cpu_id), |
| coreType("default"), |
| _status(Idle), |
| tickEvent(this), |
| stageWidth(params->stageWidth), |
| resPool(new ResourcePool(this, params)), |
| timeBuffer(2 , 2), |
| dataPort(resPool->getDataUnit()), |
| instPort(resPool->getInstUnit()), |
| removeInstsThisCycle(false), |
| activityRec(params->name, NumStages, 10, params->activity), |
| system(params->system), |
| #ifdef DEBUG |
| cpuEventNum(0), |
| resReqCount(0), |
| #endif // DEBUG |
| drainCount(0), |
| deferRegistration(false/*params->deferRegistration*/), |
| stageTracing(params->stageTracing), |
| lastRunningCycle(0), |
| instsPerSwitch(0) |
| { |
| cpu_params = params; |
| |
| // Resize for Multithreading CPUs |
| thread.resize(numThreads); |
| |
| ThreadID active_threads = params->workload.size(); |
| if (FullSystem) { |
| active_threads = 1; |
| } else { |
| active_threads = params->workload.size(); |
| |
| if (active_threads > MaxThreads) { |
| panic("Workload Size too large. Increase the 'MaxThreads'" |
| "in your InOrder implementation or " |
| "edit your workload size."); |
| } |
| |
| |
| if (active_threads > 1) { |
| threadModel = (InOrderCPU::ThreadModel) params->threadModel; |
| |
| if (threadModel == SMT) { |
| DPRINTF(InOrderCPU, "Setting Thread Model to SMT.\n"); |
| } else if (threadModel == SwitchOnCacheMiss) { |
| DPRINTF(InOrderCPU, "Setting Thread Model to " |
| "Switch On Cache Miss\n"); |
| } |
| |
| } else { |
| threadModel = Single; |
| } |
| } |
| |
| for (ThreadID tid = 0; tid < numThreads; ++tid) { |
| pc[tid].set(0); |
| lastCommittedPC[tid].set(0); |
| |
| if (FullSystem) { |
| // SMT is not supported in FS mode yet. |
| assert(numThreads == 1); |
| thread[tid] = new Thread(this, 0, NULL); |
| } else { |
| if (tid < (ThreadID)params->workload.size()) { |
| DPRINTF(InOrderCPU, "Workload[%i] process is %#x\n", |
| tid, params->workload[tid]->prog_fname); |
| thread[tid] = |
| new Thread(this, tid, params->workload[tid]); |
| } else { |
| //Allocate Empty thread so M5 can use later |
| //when scheduling threads to CPU |
| Process* dummy_proc = params->workload[0]; |
| thread[tid] = new Thread(this, tid, dummy_proc); |
| } |
| |
| // Eventually set this with parameters... |
| asid[tid] = tid; |
| } |
| |
| // Setup the TC that will serve as the interface to the threads/CPU. |
| InOrderThreadContext *tc = new InOrderThreadContext; |
| tc->cpu = this; |
| tc->thread = thread[tid]; |
| |
| // Setup quiesce event. |
| this->thread[tid]->quiesceEvent = new EndQuiesceEvent(tc); |
| |
| // Give the thread the TC. |
| thread[tid]->tc = tc; |
| thread[tid]->setFuncExeInst(0); |
| globalSeqNum[tid] = 1; |
| |
| // Add the TC to the CPU's list of TC's. |
| this->threadContexts.push_back(tc); |
| } |
| |
| // Initialize TimeBuffer Stage Queues |
| for (int stNum=0; stNum < NumStages - 1; stNum++) { |
| stageQueue[stNum] = new StageQueue(NumStages, NumStages); |
| stageQueue[stNum]->id(stNum); |
| } |
| |
| |
| // Set Up Pipeline Stages |
| for (int stNum=0; stNum < NumStages; stNum++) { |
| if (stNum == 0) |
| pipelineStage[stNum] = new FirstStage(params, stNum); |
| else |
| pipelineStage[stNum] = new PipelineStage(params, stNum); |
| |
| pipelineStage[stNum]->setCPU(this); |
| pipelineStage[stNum]->setActiveThreads(&activeThreads); |
| pipelineStage[stNum]->setTimeBuffer(&timeBuffer); |
| |
| // Take Care of 1st/Nth stages |
| if (stNum > 0) |
| pipelineStage[stNum]->setPrevStageQueue(stageQueue[stNum - 1]); |
| if (stNum < NumStages - 1) |
| pipelineStage[stNum]->setNextStageQueue(stageQueue[stNum]); |
| } |
| |
| // Initialize thread specific variables |
| for (ThreadID tid = 0; tid < numThreads; tid++) { |
| archRegDepMap[tid].setCPU(this); |
| |
| nonSpecInstActive[tid] = false; |
| nonSpecSeqNum[tid] = 0; |
| |
| squashSeqNum[tid] = MaxAddr; |
| lastSquashCycle[tid] = 0; |
| |
| memset(intRegs[tid], 0, sizeof(intRegs[tid])); |
| memset(floatRegs.i[tid], 0, sizeof(floatRegs.i[tid])); |
| isa[tid].clear(); |
| |
| // Define dummy instructions and resource requests to be used. |
| dummyInst[tid] = new InOrderDynInst(this, |
| thread[tid], |
| 0, |
| tid, |
| asid[tid]); |
| |
| dummyReq[tid] = new ResourceRequest(resPool->getResource(0)); |
| |
| |
| if (FullSystem) { |
| // Use this dummy inst to force squashing behind every instruction |
| // in pipeline |
| dummyTrapInst[tid] = new InOrderDynInst(this, NULL, 0, 0, 0); |
| dummyTrapInst[tid]->seqNum = 0; |
| dummyTrapInst[tid]->squashSeqNum = 0; |
| dummyTrapInst[tid]->setTid(tid); |
| } |
| |
| trapPending[tid] = false; |
| |
| } |
| |
| // InOrderCPU always requires an interrupt controller. |
| if (!params->defer_registration && !interrupts) { |
| fatal("InOrderCPU %s has no interrupt controller.\n" |
| "Ensure createInterruptController() is called.\n", name()); |
| } |
| |
| dummyReqInst = new InOrderDynInst(this, NULL, 0, 0, 0); |
| dummyReqInst->setSquashed(); |
| dummyReqInst->resetInstCount(); |
| |
| dummyBufferInst = new InOrderDynInst(this, NULL, 0, 0, 0); |
| dummyBufferInst->setSquashed(); |
| dummyBufferInst->resetInstCount(); |
| |
| endOfSkedIt = skedCache.end(); |
| frontEndSked = createFrontEndSked(); |
| faultSked = createFaultSked(); |
| |
| lastRunningCycle = curTick(); |
| |
| lockAddr = 0; |
| lockFlag = false; |
| |
| // Schedule First Tick Event, CPU will reschedule itself from here on out. |
| scheduleTickEvent(0); |
| } |
| |
| InOrderCPU::~InOrderCPU() |
| { |
| delete resPool; |
| |
| SkedCacheIt sked_it = skedCache.begin(); |
| SkedCacheIt sked_end = skedCache.end(); |
| |
| while (sked_it != sked_end) { |
| delete (*sked_it).second; |
| sked_it++; |
| } |
| skedCache.clear(); |
| } |
| |
| m5::hash_map<InOrderCPU::SkedID, ThePipeline::RSkedPtr> InOrderCPU::skedCache; |
| |
| RSkedPtr |
| InOrderCPU::createFrontEndSked() |
| { |
| RSkedPtr res_sked = new ResourceSked(); |
| int stage_num = 0; |
| StageScheduler F(res_sked, stage_num++); |
| StageScheduler D(res_sked, stage_num++); |
| |
| // FETCH |
| F.needs(FetchSeq, FetchSeqUnit::AssignNextPC); |
| F.needs(ICache, FetchUnit::InitiateFetch); |
| |
| // DECODE |
| D.needs(ICache, FetchUnit::CompleteFetch); |
| D.needs(Decode, DecodeUnit::DecodeInst); |
| D.needs(BPred, BranchPredictor::PredictBranch); |
| D.needs(FetchSeq, FetchSeqUnit::UpdateTargetPC); |
| |
| |
| DPRINTF(SkedCache, "Resource Sked created for instruction Front End\n"); |
| |
| return res_sked; |
| } |
| |
| RSkedPtr |
| InOrderCPU::createFaultSked() |
| { |
| RSkedPtr res_sked = new ResourceSked(); |
| StageScheduler W(res_sked, NumStages - 1); |
| W.needs(Grad, GraduationUnit::CheckFault); |
| DPRINTF(SkedCache, "Resource Sked created for instruction Faults\n"); |
| return res_sked; |
| } |
| |
| RSkedPtr |
| InOrderCPU::createBackEndSked(DynInstPtr inst) |
| { |
| RSkedPtr res_sked = lookupSked(inst); |
| if (res_sked != NULL) { |
| DPRINTF(SkedCache, "Found %s in sked cache.\n", |
| inst->instName()); |
| return res_sked; |
| } else { |
| res_sked = new ResourceSked(); |
| } |
| |
| int stage_num = ThePipeline::BackEndStartStage; |
| StageScheduler X(res_sked, stage_num++); |
| StageScheduler M(res_sked, stage_num++); |
| StageScheduler W(res_sked, stage_num++); |
| |
| if (!inst->staticInst) { |
| warn_once("Static Instruction Object Not Set. Can't Create" |
| " Back End Schedule"); |
| return NULL; |
| } |
| |
| // EXECUTE |
| X.needs(RegManager, UseDefUnit::MarkDestRegs); |
| for (int idx=0; idx < inst->numSrcRegs(); idx++) { |
| if (!idx || !inst->isStore()) { |
| X.needs(RegManager, UseDefUnit::ReadSrcReg, idx); |
| } |
| } |
| |
| //@todo: schedule non-spec insts to operate on this cycle |
| // as long as all previous insts are done |
| if ( inst->isNonSpeculative() ) { |
| // skip execution of non speculative insts until later |
| } else if ( inst->isMemRef() ) { |
| if ( inst->isLoad() ) { |
| X.needs(AGEN, AGENUnit::GenerateAddr); |
| } |
| } else if (inst->opClass() == IntMultOp || inst->opClass() == IntDivOp) { |
| X.needs(MDU, MultDivUnit::StartMultDiv); |
| } else { |
| X.needs(ExecUnit, ExecutionUnit::ExecuteInst); |
| } |
| |
| // MEMORY |
| if (!inst->isNonSpeculative()) { |
| if (inst->opClass() == IntMultOp || inst->opClass() == IntDivOp) { |
| M.needs(MDU, MultDivUnit::EndMultDiv); |
| } |
| |
| if ( inst->isLoad() ) { |
| M.needs(DCache, CacheUnit::InitiateReadData); |
| if (inst->splitInst) |
| M.needs(DCache, CacheUnit::InitSecondSplitRead); |
| } else if ( inst->isStore() ) { |
| for (int i = 1; i < inst->numSrcRegs(); i++ ) { |
| M.needs(RegManager, UseDefUnit::ReadSrcReg, i); |
| } |
| M.needs(AGEN, AGENUnit::GenerateAddr); |
| M.needs(DCache, CacheUnit::InitiateWriteData); |
| if (inst->splitInst) |
| M.needs(DCache, CacheUnit::InitSecondSplitWrite); |
| } |
| } |
| |
| // WRITEBACK |
| if (!inst->isNonSpeculative()) { |
| if ( inst->isLoad() ) { |
| W.needs(DCache, CacheUnit::CompleteReadData); |
| if (inst->splitInst) |
| W.needs(DCache, CacheUnit::CompleteSecondSplitRead); |
| } else if ( inst->isStore() ) { |
| W.needs(DCache, CacheUnit::CompleteWriteData); |
| if (inst->splitInst) |
| W.needs(DCache, CacheUnit::CompleteSecondSplitWrite); |
| } |
| } else { |
| // Finally, Execute Speculative Data |
| if (inst->isMemRef()) { |
| if (inst->isLoad()) { |
| W.needs(AGEN, AGENUnit::GenerateAddr); |
| W.needs(DCache, CacheUnit::InitiateReadData); |
| if (inst->splitInst) |
| W.needs(DCache, CacheUnit::InitSecondSplitRead); |
| W.needs(DCache, CacheUnit::CompleteReadData); |
| if (inst->splitInst) |
| W.needs(DCache, CacheUnit::CompleteSecondSplitRead); |
| } else if (inst->isStore()) { |
| if ( inst->numSrcRegs() >= 2 ) { |
| W.needs(RegManager, UseDefUnit::ReadSrcReg, 1); |
| } |
| W.needs(AGEN, AGENUnit::GenerateAddr); |
| W.needs(DCache, CacheUnit::InitiateWriteData); |
| if (inst->splitInst) |
| W.needs(DCache, CacheUnit::InitSecondSplitWrite); |
| W.needs(DCache, CacheUnit::CompleteWriteData); |
| if (inst->splitInst) |
| W.needs(DCache, CacheUnit::CompleteSecondSplitWrite); |
| } |
| } else { |
| W.needs(ExecUnit, ExecutionUnit::ExecuteInst); |
| } |
| } |
| |
| W.needs(Grad, GraduationUnit::CheckFault); |
| |
| for (int idx=0; idx < inst->numDestRegs(); idx++) { |
| W.needs(RegManager, UseDefUnit::WriteDestReg, idx); |
| } |
| |
| if (inst->isControl()) |
| W.needs(BPred, BranchPredictor::UpdatePredictor); |
| |
| W.needs(Grad, GraduationUnit::GraduateInst); |
| |
| // Insert Back Schedule into our cache of |
| // resource schedules |
| addToSkedCache(inst, res_sked); |
| |
| DPRINTF(SkedCache, "Back End Sked Created for instruction: %s (%08p)\n", |
| inst->instName(), inst->getMachInst()); |
| res_sked->print(); |
| |
| return res_sked; |
| } |
| |
| void |
| InOrderCPU::regStats() |
| { |
| /* Register the Resource Pool's stats here.*/ |
| resPool->regStats(); |
| |
| /* Register for each Pipeline Stage */ |
| for (int stage_num=0; stage_num < ThePipeline::NumStages; stage_num++) { |
| pipelineStage[stage_num]->regStats(); |
| } |
| |
| /* Register any of the InOrderCPU's stats here.*/ |
| instsPerCtxtSwitch |
| .name(name() + ".instsPerContextSwitch") |
| .desc("Instructions Committed Per Context Switch") |
| .prereq(instsPerCtxtSwitch); |
| |
| numCtxtSwitches |
| .name(name() + ".contextSwitches") |
| .desc("Number of context switches"); |
| |
| comLoads |
| .name(name() + ".comLoads") |
| .desc("Number of Load instructions committed"); |
| |
| comStores |
| .name(name() + ".comStores") |
| .desc("Number of Store instructions committed"); |
| |
| comBranches |
| .name(name() + ".comBranches") |
| .desc("Number of Branches instructions committed"); |
| |
| comNops |
| .name(name() + ".comNops") |
| .desc("Number of Nop instructions committed"); |
| |
| comNonSpec |
| .name(name() + ".comNonSpec") |
| .desc("Number of Non-Speculative instructions committed"); |
| |
| comInts |
| .name(name() + ".comInts") |
| .desc("Number of Integer instructions committed"); |
| |
| comFloats |
| .name(name() + ".comFloats") |
| .desc("Number of Floating Point instructions committed"); |
| |
| timesIdled |
| .name(name() + ".timesIdled") |
| .desc("Number of times that the entire CPU went into an idle state and" |
| " unscheduled itself") |
| .prereq(timesIdled); |
| |
| idleCycles |
| .name(name() + ".idleCycles") |
| .desc("Number of cycles cpu's stages were not processed"); |
| |
| runCycles |
| .name(name() + ".runCycles") |
| .desc("Number of cycles cpu stages are processed."); |
| |
| activity |
| .name(name() + ".activity") |
| .desc("Percentage of cycles cpu is active") |
| .precision(6); |
| activity = (runCycles / numCycles) * 100; |
| |
| threadCycles |
| .init(numThreads) |
| .name(name() + ".threadCycles") |
| .desc("Total Number of Cycles A Thread Was Active in CPU (Per-Thread)"); |
| |
| smtCycles |
| .name(name() + ".smtCycles") |
| .desc("Total number of cycles that the CPU was in SMT-mode"); |
| |
| committedInsts |
| .init(numThreads) |
| .name(name() + ".committedInsts") |
| .desc("Number of Instructions committed (Per-Thread)"); |
| |
| committedOps |
| .init(numThreads) |
| .name(name() + ".committedOps") |
| .desc("Number of Ops committed (Per-Thread)"); |
| |
| smtCommittedInsts |
| .init(numThreads) |
| .name(name() + ".smtCommittedInsts") |
| .desc("Number of SMT Instructions committed (Per-Thread)"); |
| |
| totalCommittedInsts |
| .name(name() + ".committedInsts_total") |
| .desc("Number of Instructions committed (Total)"); |
| |
| cpi |
| .name(name() + ".cpi") |
| .desc("CPI: Cycles Per Instruction (Per-Thread)") |
| .precision(6); |
| cpi = numCycles / committedInsts; |
| |
| smtCpi |
| .name(name() + ".smt_cpi") |
| .desc("CPI: Total SMT-CPI") |
| .precision(6); |
| smtCpi = smtCycles / smtCommittedInsts; |
| |
| totalCpi |
| .name(name() + ".cpi_total") |
| .desc("CPI: Total CPI of All Threads") |
| .precision(6); |
| totalCpi = numCycles / totalCommittedInsts; |
| |
| ipc |
| .name(name() + ".ipc") |
| .desc("IPC: Instructions Per Cycle (Per-Thread)") |
| .precision(6); |
| ipc = committedInsts / numCycles; |
| |
| smtIpc |
| .name(name() + ".smt_ipc") |
| .desc("IPC: Total SMT-IPC") |
| .precision(6); |
| smtIpc = smtCommittedInsts / smtCycles; |
| |
| totalIpc |
| .name(name() + ".ipc_total") |
| .desc("IPC: Total IPC of All Threads") |
| .precision(6); |
| totalIpc = totalCommittedInsts / numCycles; |
| |
| BaseCPU::regStats(); |
| } |
| |
| |
| void |
| InOrderCPU::tick() |
| { |
| DPRINTF(InOrderCPU, "\n\nInOrderCPU: Ticking main, InOrderCPU.\n"); |
| |
| ++numCycles; |
| |
| checkForInterrupts(); |
| |
| bool pipes_idle = true; |
| //Tick each of the stages |
| for (int stNum=NumStages - 1; stNum >= 0 ; stNum--) { |
| pipelineStage[stNum]->tick(); |
| |
| pipes_idle = pipes_idle && pipelineStage[stNum]->idle; |
| } |
| |
| if (pipes_idle) |
| idleCycles++; |
| else |
| runCycles++; |
| |
| // Now advance the time buffers one tick |
| timeBuffer.advance(); |
| for (int sqNum=0; sqNum < NumStages - 1; sqNum++) { |
| stageQueue[sqNum]->advance(); |
| } |
| activityRec.advance(); |
| |
| // Any squashed events, or insts then remove them now |
| cleanUpRemovedEvents(); |
| cleanUpRemovedInsts(); |
| |
| // Re-schedule CPU for this cycle |
| if (!tickEvent.scheduled()) { |
| if (_status == SwitchedOut) { |
| // increment stat |
| lastRunningCycle = curTick(); |
| } else if (!activityRec.active()) { |
| DPRINTF(InOrderCPU, "sleeping CPU.\n"); |
| lastRunningCycle = curTick(); |
| timesIdled++; |
| } else { |
| //Tick next_tick = curTick() + cycles(1); |
| //tickEvent.schedule(next_tick); |
| schedule(&tickEvent, nextCycle(curTick() + 1)); |
| DPRINTF(InOrderCPU, "Scheduled CPU for next tick @ %i.\n", |
| nextCycle(curTick() + 1)); |
| } |
| } |
| |
| tickThreadStats(); |
| updateThreadPriority(); |
| } |
| |
| |
| void |
| InOrderCPU::init() |
| { |
| if (!deferRegistration) { |
| registerThreadContexts(); |
| } |
| |
| // Set inSyscall so that the CPU doesn't squash when initially |
| // setting up registers. |
| for (ThreadID tid = 0; tid < numThreads; ++tid) |
| thread[tid]->inSyscall = true; |
| |
| if (FullSystem) { |
| for (ThreadID tid = 0; tid < numThreads; tid++) { |
| ThreadContext *src_tc = threadContexts[tid]; |
| TheISA::initCPU(src_tc, src_tc->contextId()); |
| // Initialise the ThreadContext's memory proxies |
| thread[tid]->initMemProxies(thread[tid]->getTC()); |
| } |
| } |
| |
| // Clear inSyscall. |
| for (ThreadID tid = 0; tid < numThreads; ++tid) |
| thread[tid]->inSyscall = false; |
| |
| // Call Initializiation Routine for Resource Pool |
| resPool->init(); |
| } |
| |
| Fault |
| InOrderCPU::hwrei(ThreadID tid) |
| { |
| #if THE_ISA == ALPHA_ISA |
| // Need to clear the lock flag upon returning from an interrupt. |
| setMiscRegNoEffect(AlphaISA::MISCREG_LOCKFLAG, false, tid); |
| |
| thread[tid]->kernelStats->hwrei(); |
| // FIXME: XXX check for interrupts? XXX |
| #endif |
| |
| return NoFault; |
| } |
| |
| |
| bool |
| InOrderCPU::simPalCheck(int palFunc, ThreadID tid) |
| { |
| #if THE_ISA == ALPHA_ISA |
| if (this->thread[tid]->kernelStats) |
| this->thread[tid]->kernelStats->callpal(palFunc, |
| this->threadContexts[tid]); |
| |
| switch (palFunc) { |
| case PAL::halt: |
| halt(); |
| if (--System::numSystemsRunning == 0) |
| exitSimLoop("all cpus halted"); |
| break; |
| |
| case PAL::bpt: |
| case PAL::bugchk: |
| if (this->system->breakpoint()) |
| return false; |
| break; |
| } |
| #endif |
| return true; |
| } |
| |
| void |
| InOrderCPU::checkForInterrupts() |
| { |
| for (int i = 0; i < threadContexts.size(); i++) { |
| ThreadContext *tc = threadContexts[i]; |
| |
| if (interrupts->checkInterrupts(tc)) { |
| Fault interrupt = interrupts->getInterrupt(tc); |
| |
| if (interrupt != NoFault) { |
| DPRINTF(Interrupt, "Processing Intterupt for [tid:%i].\n", |
| tc->threadId()); |
| |
| ThreadID tid = tc->threadId(); |
| interrupts->updateIntrInfo(tc); |
| |
| // Squash from Last Stage in Pipeline |
| unsigned last_stage = NumStages - 1; |
| dummyTrapInst[tid]->squashingStage = last_stage; |
| pipelineStage[last_stage]->setupSquash(dummyTrapInst[tid], |
| tid); |
| |
| // By default, setupSquash will always squash from stage + 1 |
| pipelineStage[BackEndStartStage - 1]->setupSquash(dummyTrapInst[tid], |
| tid); |
| |
| // Schedule Squash Through-out Resource Pool |
| resPool->scheduleEvent( |
| (InOrderCPU::CPUEventType)ResourcePool::SquashAll, |
| dummyTrapInst[tid], 0); |
| |
| // Finally, Setup Trap to happen at end of cycle |
| trapContext(interrupt, tid, dummyTrapInst[tid]); |
| } |
| } |
| } |
| } |
| |
| Fault |
| InOrderCPU::getInterrupts() |
| { |
| // Check if there are any outstanding interrupts |
| return interrupts->getInterrupt(threadContexts[0]); |
| } |
| |
| void |
| InOrderCPU::processInterrupts(Fault interrupt) |
| { |
| // Check for interrupts here. For now can copy the code that |
| // exists within isa_fullsys_traits.hh. Also assume that thread 0 |
| // is the one that handles the interrupts. |
| // @todo: Possibly consolidate the interrupt checking code. |
| // @todo: Allow other threads to handle interrupts. |
| |
| assert(interrupt != NoFault); |
| interrupts->updateIntrInfo(threadContexts[0]); |
| |
| DPRINTF(InOrderCPU, "Interrupt %s being handled\n", interrupt->name()); |
| |
| // Note: Context ID ok here? Impl. of FS mode needs to revisit this |
| trap(interrupt, threadContexts[0]->contextId(), dummyBufferInst); |
| } |
| |
| void |
| InOrderCPU::trapContext(Fault fault, ThreadID tid, DynInstPtr inst, int delay) |
| { |
| scheduleCpuEvent(Trap, fault, tid, inst, delay); |
| trapPending[tid] = true; |
| } |
| |
| void |
| InOrderCPU::trap(Fault fault, ThreadID tid, DynInstPtr inst) |
| { |
| fault->invoke(tcBase(tid), inst->staticInst); |
| removePipelineStalls(tid); |
| } |
| |
| void |
| InOrderCPU::squashFromMemStall(DynInstPtr inst, ThreadID tid, int delay) |
| { |
| scheduleCpuEvent(SquashFromMemStall, NoFault, tid, inst, delay); |
| } |
| |
| |
| void |
| InOrderCPU::squashDueToMemStall(int stage_num, InstSeqNum seq_num, |
| ThreadID tid) |
| { |
| DPRINTF(InOrderCPU, "Squashing Pipeline Stages Due to Memory Stall...\n"); |
| |
| // Squash all instructions in each stage including |
| // instruction that caused the squash (seq_num - 1) |
| // NOTE: The stage bandwidth needs to be cleared so thats why |
| // the stalling instruction is squashed as well. The stalled |
| // instruction is previously placed in another intermediate buffer |
| // while it's stall is being handled. |
| InstSeqNum squash_seq_num = seq_num - 1; |
| |
| for (int stNum=stage_num; stNum >= 0 ; stNum--) { |
| pipelineStage[stNum]->squashDueToMemStall(squash_seq_num, tid); |
| } |
| } |
| |
| void |
| InOrderCPU::scheduleCpuEvent(CPUEventType c_event, Fault fault, |
| ThreadID tid, DynInstPtr inst, |
| unsigned delay, CPUEventPri event_pri) |
| { |
| CPUEvent *cpu_event = new CPUEvent(this, c_event, fault, tid, inst, |
| event_pri); |
| |
| Tick sked_tick = nextCycle(curTick() + ticks(delay)); |
| if (delay >= 0) { |
| DPRINTF(InOrderCPU, "Scheduling CPU Event (%s) for cycle %i, [tid:%i].\n", |
| eventNames[c_event], curTick() + delay, tid); |
| schedule(cpu_event, sked_tick); |
| } else { |
| cpu_event->process(); |
| cpuEventRemoveList.push(cpu_event); |
| } |
| |
| // Broadcast event to the Resource Pool |
| // Need to reset tid just in case this is a dummy instruction |
| inst->setTid(tid); |
| resPool->scheduleEvent(c_event, inst, 0, 0, tid); |
| } |
| |
| bool |
| InOrderCPU::isThreadActive(ThreadID tid) |
| { |
| list<ThreadID>::iterator isActive = |
| std::find(activeThreads.begin(), activeThreads.end(), tid); |
| |
| return (isActive != activeThreads.end()); |
| } |
| |
| bool |
| InOrderCPU::isThreadReady(ThreadID tid) |
| { |
| list<ThreadID>::iterator isReady = |
| std::find(readyThreads.begin(), readyThreads.end(), tid); |
| |
| return (isReady != readyThreads.end()); |
| } |
| |
| bool |
| InOrderCPU::isThreadSuspended(ThreadID tid) |
| { |
| list<ThreadID>::iterator isSuspended = |
| std::find(suspendedThreads.begin(), suspendedThreads.end(), tid); |
| |
| return (isSuspended != suspendedThreads.end()); |
| } |
| |
| void |
| InOrderCPU::activateNextReadyThread() |
| { |
| if (readyThreads.size() >= 1) { |
| ThreadID ready_tid = readyThreads.front(); |
| |
| // Activate in Pipeline |
| activateThread(ready_tid); |
| |
| // Activate in Resource Pool |
| resPool->activateThread(ready_tid); |
| |
| list<ThreadID>::iterator ready_it = |
| std::find(readyThreads.begin(), readyThreads.end(), ready_tid); |
| readyThreads.erase(ready_it); |
| } else { |
| DPRINTF(InOrderCPU, |
| "Attempting to activate new thread, but No Ready Threads to" |
| "activate.\n"); |
| DPRINTF(InOrderCPU, |
| "Unable to switch to next active thread.\n"); |
| } |
| } |
| |
| void |
| InOrderCPU::activateThread(ThreadID tid) |
| { |
| if (isThreadSuspended(tid)) { |
| DPRINTF(InOrderCPU, |
| "Removing [tid:%i] from suspended threads list.\n", tid); |
| |
| list<ThreadID>::iterator susp_it = |
| std::find(suspendedThreads.begin(), suspendedThreads.end(), |
| tid); |
| suspendedThreads.erase(susp_it); |
| } |
| |
| if (threadModel == SwitchOnCacheMiss && |
| numActiveThreads() == 1) { |
| DPRINTF(InOrderCPU, |
| "Ignoring activation of [tid:%i], since [tid:%i] is " |
| "already running.\n", tid, activeThreadId()); |
| |
| DPRINTF(InOrderCPU,"Placing [tid:%i] on ready threads list\n", |
| tid); |
| |
| readyThreads.push_back(tid); |
| |
| } else if (!isThreadActive(tid)) { |
| DPRINTF(InOrderCPU, |
| "Adding [tid:%i] to active threads list.\n", tid); |
| activeThreads.push_back(tid); |
| |
| activateThreadInPipeline(tid); |
| |
| thread[tid]->lastActivate = curTick(); |
| |
| tcBase(tid)->setStatus(ThreadContext::Active); |
| |
| wakeCPU(); |
| |
| numCtxtSwitches++; |
| } |
| } |
| |
| void |
| InOrderCPU::activateThreadInPipeline(ThreadID tid) |
| { |
| for (int stNum=0; stNum < NumStages; stNum++) { |
| pipelineStage[stNum]->activateThread(tid); |
| } |
| } |
| |
| void |
| InOrderCPU::deactivateContext(ThreadID tid, int delay) |
| { |
| DPRINTF(InOrderCPU,"[tid:%i]: Deactivating ...\n", tid); |
| |
| scheduleCpuEvent(DeactivateThread, NoFault, tid, dummyInst[tid], delay); |
| |
| // Be sure to signal that there's some activity so the CPU doesn't |
| // deschedule itself. |
| activityRec.activity(); |
| |
| _status = Running; |
| } |
| |
| void |
| InOrderCPU::deactivateThread(ThreadID tid) |
| { |
| DPRINTF(InOrderCPU, "[tid:%i]: Calling deactivate thread.\n", tid); |
| |
| if (isThreadActive(tid)) { |
| DPRINTF(InOrderCPU,"[tid:%i]: Removing from active threads list\n", |
| tid); |
| list<ThreadID>::iterator thread_it = |
| std::find(activeThreads.begin(), activeThreads.end(), tid); |
| |
| removePipelineStalls(*thread_it); |
| |
| activeThreads.erase(thread_it); |
| |
| // Ideally, this should be triggered from the |
| // suspendContext/Thread functions |
| tcBase(tid)->setStatus(ThreadContext::Suspended); |
| } |
| |
| assert(!isThreadActive(tid)); |
| } |
| |
| void |
| InOrderCPU::removePipelineStalls(ThreadID tid) |
| { |
| DPRINTF(InOrderCPU,"[tid:%i]: Removing all pipeline stalls\n", |
| tid); |
| |
| for (int stNum = 0; stNum < NumStages ; stNum++) { |
| pipelineStage[stNum]->removeStalls(tid); |
| } |
| |
| } |
| |
| void |
| InOrderCPU::updateThreadPriority() |
| { |
| if (activeThreads.size() > 1) |
| { |
| //DEFAULT TO ROUND ROBIN SCHEME |
| //e.g. Move highest priority to end of thread list |
| list<ThreadID>::iterator list_begin = activeThreads.begin(); |
| |
| unsigned high_thread = *list_begin; |
| |
| activeThreads.erase(list_begin); |
| |
| activeThreads.push_back(high_thread); |
| } |
| } |
| |
| inline void |
| InOrderCPU::tickThreadStats() |
| { |
| /** Keep track of cycles that each thread is active */ |
| list<ThreadID>::iterator thread_it = activeThreads.begin(); |
| while (thread_it != activeThreads.end()) { |
| threadCycles[*thread_it]++; |
| thread_it++; |
| } |
| |
| // Keep track of cycles where SMT is active |
| if (activeThreads.size() > 1) { |
| smtCycles++; |
| } |
| } |
| |
| void |
| InOrderCPU::activateContext(ThreadID tid, int delay) |
| { |
| DPRINTF(InOrderCPU,"[tid:%i]: Activating ...\n", tid); |
| |
| |
| scheduleCpuEvent(ActivateThread, NoFault, tid, dummyInst[tid], delay); |
| |
| // Be sure to signal that there's some activity so the CPU doesn't |
| // deschedule itself. |
| activityRec.activity(); |
| |
| _status = Running; |
| } |
| |
| void |
| InOrderCPU::activateNextReadyContext(int delay) |
| { |
| DPRINTF(InOrderCPU,"Activating next ready thread\n"); |
| |
| scheduleCpuEvent(ActivateNextReadyThread, NoFault, 0/*tid*/, dummyInst[0], |
| delay, ActivateNextReadyThread_Pri); |
| |
| // Be sure to signal that there's some activity so the CPU doesn't |
| // deschedule itself. |
| activityRec.activity(); |
| |
| _status = Running; |
| } |
| |
| void |
| InOrderCPU::haltContext(ThreadID tid) |
| { |
| DPRINTF(InOrderCPU, "[tid:%i]: Calling Halt Context...\n", tid); |
| |
| scheduleCpuEvent(HaltThread, NoFault, tid, dummyInst[tid]); |
| |
| activityRec.activity(); |
| } |
| |
| void |
| InOrderCPU::haltThread(ThreadID tid) |
| { |
| DPRINTF(InOrderCPU, "[tid:%i]: Placing on Halted Threads List...\n", tid); |
| deactivateThread(tid); |
| squashThreadInPipeline(tid); |
| haltedThreads.push_back(tid); |
| |
| tcBase(tid)->setStatus(ThreadContext::Halted); |
| |
| if (threadModel == SwitchOnCacheMiss) { |
| activateNextReadyContext(); |
| } |
| } |
| |
| void |
| InOrderCPU::suspendContext(ThreadID tid) |
| { |
| scheduleCpuEvent(SuspendThread, NoFault, tid, dummyInst[tid]); |
| } |
| |
| void |
| InOrderCPU::suspendThread(ThreadID tid) |
| { |
| DPRINTF(InOrderCPU, "[tid:%i]: Placing on Suspended Threads List...\n", |
| tid); |
| deactivateThread(tid); |
| suspendedThreads.push_back(tid); |
| thread[tid]->lastSuspend = curTick(); |
| |
| tcBase(tid)->setStatus(ThreadContext::Suspended); |
| } |
| |
| void |
| InOrderCPU::squashThreadInPipeline(ThreadID tid) |
| { |
| //Squash all instructions in each stage |
| for (int stNum=NumStages - 1; stNum >= 0 ; stNum--) { |
| pipelineStage[stNum]->squash(0 /*seq_num*/, tid); |
| } |
| } |
| |
| PipelineStage* |
| InOrderCPU::getPipeStage(int stage_num) |
| { |
| return pipelineStage[stage_num]; |
| } |
| |
| |
| RegIndex |
| InOrderCPU::flattenRegIdx(RegIndex reg_idx, RegType ®_type, ThreadID tid) |
| { |
| if (reg_idx < FP_Base_DepTag) { |
| reg_type = IntType; |
| return isa[tid].flattenIntIndex(reg_idx); |
| } else if (reg_idx < Ctrl_Base_DepTag) { |
| reg_type = FloatType; |
| reg_idx -= FP_Base_DepTag; |
| return isa[tid].flattenFloatIndex(reg_idx); |
| } else { |
| reg_type = MiscType; |
| return reg_idx - TheISA::Ctrl_Base_DepTag; |
| } |
| } |
| |
| uint64_t |
| InOrderCPU::readIntReg(RegIndex reg_idx, ThreadID tid) |
| { |
| DPRINTF(IntRegs, "[tid:%i]: Reading Int. Reg %i as %x\n", |
| tid, reg_idx, intRegs[tid][reg_idx]); |
| |
| return intRegs[tid][reg_idx]; |
| } |
| |
| FloatReg |
| InOrderCPU::readFloatReg(RegIndex reg_idx, ThreadID tid) |
| { |
| DPRINTF(FloatRegs, "[tid:%i]: Reading Float Reg %i as %x, %08f\n", |
| tid, reg_idx, floatRegs.i[tid][reg_idx], floatRegs.f[tid][reg_idx]); |
| |
| return floatRegs.f[tid][reg_idx]; |
| } |
| |
| FloatRegBits |
| InOrderCPU::readFloatRegBits(RegIndex reg_idx, ThreadID tid) |
| { |
| DPRINTF(FloatRegs, "[tid:%i]: Reading Float Reg %i as %x, %08f\n", |
| tid, reg_idx, floatRegs.i[tid][reg_idx], floatRegs.f[tid][reg_idx]); |
| |
| return floatRegs.i[tid][reg_idx]; |
| } |
| |
| void |
| InOrderCPU::setIntReg(RegIndex reg_idx, uint64_t val, ThreadID tid) |
| { |
| if (reg_idx == TheISA::ZeroReg) { |
| DPRINTF(IntRegs, "[tid:%i]: Ignoring Setting of ISA-ZeroReg " |
| "(Int. Reg %i) to %x\n", tid, reg_idx, val); |
| return; |
| } else { |
| DPRINTF(IntRegs, "[tid:%i]: Setting Int. Reg %i to %x\n", |
| tid, reg_idx, val); |
| |
| intRegs[tid][reg_idx] = val; |
| } |
| } |
| |
| |
| void |
| InOrderCPU::setFloatReg(RegIndex reg_idx, FloatReg val, ThreadID tid) |
| { |
| floatRegs.f[tid][reg_idx] = val; |
| DPRINTF(FloatRegs, "[tid:%i]: Setting Float. Reg %i bits to " |
| "%x, %08f\n", |
| tid, reg_idx, |
| floatRegs.i[tid][reg_idx], |
| floatRegs.f[tid][reg_idx]); |
| } |
| |
| |
| void |
| InOrderCPU::setFloatRegBits(RegIndex reg_idx, FloatRegBits val, ThreadID tid) |
| { |
| floatRegs.i[tid][reg_idx] = val; |
| DPRINTF(FloatRegs, "[tid:%i]: Setting Float. Reg %i bits to " |
| "%x, %08f\n", |
| tid, reg_idx, |
| floatRegs.i[tid][reg_idx], |
| floatRegs.f[tid][reg_idx]); |
| } |
| |
| uint64_t |
| InOrderCPU::readRegOtherThread(unsigned reg_idx, ThreadID tid) |
| { |
| // If Default value is set, then retrieve target thread |
| if (tid == InvalidThreadID) { |
| tid = TheISA::getTargetThread(tcBase(tid)); |
| } |
| |
| if (reg_idx < FP_Base_DepTag) { |
| // Integer Register File |
| return readIntReg(reg_idx, tid); |
| } else if (reg_idx < Ctrl_Base_DepTag) { |
| // Float Register File |
| reg_idx -= FP_Base_DepTag; |
| return readFloatRegBits(reg_idx, tid); |
| } else { |
| reg_idx -= Ctrl_Base_DepTag; |
| return readMiscReg(reg_idx, tid); // Misc. Register File |
| } |
| } |
| void |
| InOrderCPU::setRegOtherThread(unsigned reg_idx, const MiscReg &val, |
| ThreadID tid) |
| { |
| // If Default value is set, then retrieve target thread |
| if (tid == InvalidThreadID) { |
| tid = TheISA::getTargetThread(tcBase(tid)); |
| } |
| |
| if (reg_idx < FP_Base_DepTag) { // Integer Register File |
| setIntReg(reg_idx, val, tid); |
| } else if (reg_idx < Ctrl_Base_DepTag) { // Float Register File |
| reg_idx -= FP_Base_DepTag; |
| setFloatRegBits(reg_idx, val, tid); |
| } else { |
| reg_idx -= Ctrl_Base_DepTag; |
| setMiscReg(reg_idx, val, tid); // Misc. Register File |
| } |
| } |
| |
| MiscReg |
| InOrderCPU::readMiscRegNoEffect(int misc_reg, ThreadID tid) |
| { |
| return isa[tid].readMiscRegNoEffect(misc_reg); |
| } |
| |
| MiscReg |
| InOrderCPU::readMiscReg(int misc_reg, ThreadID tid) |
| { |
| return isa[tid].readMiscReg(misc_reg, tcBase(tid)); |
| } |
| |
| void |
| InOrderCPU::setMiscRegNoEffect(int misc_reg, const MiscReg &val, ThreadID tid) |
| { |
| isa[tid].setMiscRegNoEffect(misc_reg, val); |
| } |
| |
| void |
| InOrderCPU::setMiscReg(int misc_reg, const MiscReg &val, ThreadID tid) |
| { |
| isa[tid].setMiscReg(misc_reg, val, tcBase(tid)); |
| } |
| |
| |
| InOrderCPU::ListIt |
| InOrderCPU::addInst(DynInstPtr inst) |
| { |
| ThreadID tid = inst->readTid(); |
| |
| instList[tid].push_back(inst); |
| |
| return --(instList[tid].end()); |
| } |
| |
| InOrderCPU::ListIt |
| InOrderCPU::findInst(InstSeqNum seq_num, ThreadID tid) |
| { |
| ListIt it = instList[tid].begin(); |
| ListIt end = instList[tid].end(); |
| |
| while (it != end) { |
| if ((*it)->seqNum == seq_num) |
| return it; |
| else if ((*it)->seqNum > seq_num) |
| break; |
| |
| it++; |
| } |
| |
| return instList[tid].end(); |
| } |
| |
| void |
| InOrderCPU::updateContextSwitchStats() |
| { |
| // Set Average Stat Here, then reset to 0 |
| instsPerCtxtSwitch = instsPerSwitch; |
| instsPerSwitch = 0; |
| } |
| |
| |
| void |
| InOrderCPU::instDone(DynInstPtr inst, ThreadID tid) |
| { |
| // Set the nextPC to be fetched if this is the last instruction |
| // committed |
| // ======== |
| // This contributes to the precise state of the CPU |
| // which can be used when restoring a thread to the CPU after after any |
| // type of context switching activity (fork, exception, etc.) |
| TheISA::PCState comm_pc = inst->pcState(); |
| lastCommittedPC[tid] = comm_pc; |
| TheISA::advancePC(comm_pc, inst->staticInst); |
| pcState(comm_pc, tid); |
| |
| //@todo: may be unnecessary with new-ISA-specific branch handling code |
| if (inst->isControl()) { |
| thread[tid]->lastGradIsBranch = true; |
| thread[tid]->lastBranchPC = inst->pcState(); |
| TheISA::advancePC(thread[tid]->lastBranchPC, inst->staticInst); |
| } else { |
| thread[tid]->lastGradIsBranch = false; |
| } |
| |
| |
| // Finalize Trace Data For Instruction |
| if (inst->traceData) { |
| //inst->traceData->setCycle(curTick()); |
| inst->traceData->setFetchSeq(inst->seqNum); |
| //inst->traceData->setCPSeq(cpu->tcBase(tid)->numInst); |
| inst->traceData->dump(); |
| delete inst->traceData; |
| inst->traceData = NULL; |
| } |
| |
| // Increment active thread's instruction count |
| instsPerSwitch++; |
| |
| // Increment thread-state's instruction count |
| thread[tid]->numInst++; |
| thread[tid]->numOp++; |
| |
| // Increment thread-state's instruction stats |
| thread[tid]->numInsts++; |
| thread[tid]->numOps++; |
| |
| // Count committed insts per thread stats |
| if (!inst->isMicroop() || inst->isLastMicroop()) { |
| committedInsts[tid]++; |
| |
| // Count total insts committed stat |
| totalCommittedInsts++; |
| } |
| |
| committedOps[tid]++; |
| |
| // Count SMT-committed insts per thread stat |
| if (numActiveThreads() > 1) { |
| if (!inst->isMicroop() || inst->isLastMicroop()) |
| smtCommittedInsts[tid]++; |
| } |
| |
| // Instruction-Mix Stats |
| if (inst->isLoad()) { |
| comLoads++; |
| } else if (inst->isStore()) { |
| comStores++; |
| } else if (inst->isControl()) { |
| comBranches++; |
| } else if (inst->isNop()) { |
| comNops++; |
| } else if (inst->isNonSpeculative()) { |
| comNonSpec++; |
| } else if (inst->isInteger()) { |
| comInts++; |
| } else if (inst->isFloating()) { |
| comFloats++; |
| } |
| |
| // Check for instruction-count-based events. |
| comInstEventQueue[tid]->serviceEvents(thread[tid]->numOp); |
| |
| // Finally, remove instruction from CPU |
| removeInst(inst); |
| } |
| |
| // currently unused function, but substitute repetitive code w/this function |
| // call |
| void |
| InOrderCPU::addToRemoveList(DynInstPtr inst) |
| { |
| removeInstsThisCycle = true; |
| if (!inst->isRemoveList()) { |
| DPRINTF(InOrderCPU, "Pushing instruction [tid:%i] PC %s " |
| "[sn:%lli] to remove list\n", |
| inst->threadNumber, inst->pcState(), inst->seqNum); |
| inst->setRemoveList(); |
| removeList.push(inst->getInstListIt()); |
| } else { |
| DPRINTF(InOrderCPU, "Ignoring instruction removal for [tid:%i] PC %s " |
| "[sn:%lli], already remove list\n", |
| inst->threadNumber, inst->pcState(), inst->seqNum); |
| } |
| |
| } |
| |
| void |
| InOrderCPU::removeInst(DynInstPtr inst) |
| { |
| DPRINTF(InOrderCPU, "Removing graduated instruction [tid:%i] PC %s " |
| "[sn:%lli]\n", |
| inst->threadNumber, inst->pcState(), inst->seqNum); |
| |
| removeInstsThisCycle = true; |
| |
| // Remove the instruction. |
| if (!inst->isRemoveList()) { |
| DPRINTF(InOrderCPU, "Pushing instruction [tid:%i] PC %s " |
| "[sn:%lli] to remove list\n", |
| inst->threadNumber, inst->pcState(), inst->seqNum); |
| inst->setRemoveList(); |
| removeList.push(inst->getInstListIt()); |
| } else { |
| DPRINTF(InOrderCPU, "Ignoring instruction removal for [tid:%i] PC %s " |
| "[sn:%lli], already on remove list\n", |
| inst->threadNumber, inst->pcState(), inst->seqNum); |
| } |
| |
| } |
| |
| void |
| InOrderCPU::removeInstsUntil(const InstSeqNum &seq_num, ThreadID tid) |
| { |
| //assert(!instList[tid].empty()); |
| |
| removeInstsThisCycle = true; |
| |
| ListIt inst_iter = instList[tid].end(); |
| |
| inst_iter--; |
| |
| DPRINTF(InOrderCPU, "Squashing instructions from CPU instruction " |
| "list that are from [tid:%i] and above [sn:%lli] (end=%lli).\n", |
| tid, seq_num, (*inst_iter)->seqNum); |
| |
| while ((*inst_iter)->seqNum > seq_num) { |
| |
| bool break_loop = (inst_iter == instList[tid].begin()); |
| |
| squashInstIt(inst_iter, tid); |
| |
| inst_iter--; |
| |
| if (break_loop) |
| break; |
| } |
| } |
| |
| |
| inline void |
| InOrderCPU::squashInstIt(const ListIt inst_it, ThreadID tid) |
| { |
| DynInstPtr inst = (*inst_it); |
| if (inst->threadNumber == tid) { |
| DPRINTF(InOrderCPU, "Squashing instruction, " |
| "[tid:%i] [sn:%lli] PC %s\n", |
| inst->threadNumber, |
| inst->seqNum, |
| inst->pcState()); |
| |
| inst->setSquashed(); |
| archRegDepMap[tid].remove(inst); |
| |
| if (!inst->isRemoveList()) { |
| DPRINTF(InOrderCPU, "Pushing instruction [tid:%i] PC %s " |
| "[sn:%lli] to remove list\n", |
| inst->threadNumber, inst->pcState(), |
| inst->seqNum); |
| inst->setRemoveList(); |
| removeList.push(inst_it); |
| } else { |
| DPRINTF(InOrderCPU, "Ignoring instruction removal for [tid:%i]" |
| " PC %s [sn:%lli], already on remove list\n", |
| inst->threadNumber, inst->pcState(), |
| inst->seqNum); |
| } |
| |
| } |
| |
| } |
| |
| |
| void |
| InOrderCPU::cleanUpRemovedInsts() |
| { |
| while (!removeList.empty()) { |
| DPRINTF(InOrderCPU, "Removing instruction, " |
| "[tid:%i] [sn:%lli] PC %s\n", |
| (*removeList.front())->threadNumber, |
| (*removeList.front())->seqNum, |
| (*removeList.front())->pcState()); |
| |
| DynInstPtr inst = *removeList.front(); |
| ThreadID tid = inst->threadNumber; |
| |
| // Remove From Register Dependency Map, If Necessary |
| // archRegDepMap[tid].remove(inst); |
| |
| // Clear if Non-Speculative |
| if (inst->staticInst && |
| inst->seqNum == nonSpecSeqNum[tid] && |
| nonSpecInstActive[tid] == true) { |
| nonSpecInstActive[tid] = false; |
| } |
| |
| inst->onInstList = false; |
| |
| instList[tid].erase(removeList.front()); |
| |
| removeList.pop(); |
| } |
| |
| removeInstsThisCycle = false; |
| } |
| |
| void |
| InOrderCPU::cleanUpRemovedEvents() |
| { |
| while (!cpuEventRemoveList.empty()) { |
| Event *cpu_event = cpuEventRemoveList.front(); |
| cpuEventRemoveList.pop(); |
| delete cpu_event; |
| } |
| } |
| |
| |
| void |
| InOrderCPU::dumpInsts() |
| { |
| int num = 0; |
| |
| ListIt inst_list_it = instList[0].begin(); |
| |
| cprintf("Dumping Instruction List\n"); |
| |
| while (inst_list_it != instList[0].end()) { |
| cprintf("Instruction:%i\nPC:%s\n[tid:%i]\n[sn:%lli]\nIssued:%i\n" |
| "Squashed:%i\n\n", |
| num, (*inst_list_it)->pcState(), |
| (*inst_list_it)->threadNumber, |
| (*inst_list_it)->seqNum, (*inst_list_it)->isIssued(), |
| (*inst_list_it)->isSquashed()); |
| inst_list_it++; |
| ++num; |
| } |
| } |
| |
| void |
| InOrderCPU::wakeCPU() |
| { |
| if (/*activityRec.active() || */tickEvent.scheduled()) { |
| DPRINTF(Activity, "CPU already running.\n"); |
| return; |
| } |
| |
| DPRINTF(Activity, "Waking up CPU\n"); |
| |
| Tick extra_cycles = tickToCycles((curTick() - 1) - lastRunningCycle); |
| |
| idleCycles += extra_cycles; |
| for (int stage_num = 0; stage_num < NumStages; stage_num++) { |
| pipelineStage[stage_num]->idleCycles += extra_cycles; |
| } |
| |
| numCycles += extra_cycles; |
| |
| schedule(&tickEvent, nextCycle(curTick())); |
| } |
| |
| // Lots of copied full system code...place into BaseCPU class? |
| void |
| InOrderCPU::wakeup() |
| { |
| if (thread[0]->status() != ThreadContext::Suspended) |
| return; |
| |
| wakeCPU(); |
| |
| DPRINTF(Quiesce, "Suspended Processor woken\n"); |
| threadContexts[0]->activate(); |
| } |
| |
| void |
| InOrderCPU::syscallContext(Fault fault, ThreadID tid, DynInstPtr inst, int delay) |
| { |
| // Syscall must be non-speculative, so squash from last stage |
| unsigned squash_stage = NumStages - 1; |
| inst->setSquashInfo(squash_stage); |
| |
| // Squash In Pipeline Stage |
| pipelineStage[squash_stage]->setupSquash(inst, tid); |
| |
| // Schedule Squash Through-out Resource Pool |
| resPool->scheduleEvent( |
| (InOrderCPU::CPUEventType)ResourcePool::SquashAll, inst, 0); |
| scheduleCpuEvent(Syscall, fault, tid, inst, delay, Syscall_Pri); |
| } |
| |
| void |
| InOrderCPU::syscall(int64_t callnum, ThreadID tid) |
| { |
| DPRINTF(InOrderCPU, "[tid:%i] Executing syscall().\n\n", tid); |
| |
| DPRINTF(Activity,"Activity: syscall() called.\n"); |
| |
| // Temporarily increase this by one to account for the syscall |
| // instruction. |
| ++(this->thread[tid]->funcExeInst); |
| |
| // Execute the actual syscall. |
| this->thread[tid]->syscall(callnum); |
| |
| // Decrease funcExeInst by one as the normal commit will handle |
| // incrementing it. |
| --(this->thread[tid]->funcExeInst); |
| |
| // Clear Non-Speculative Block Variable |
| nonSpecInstActive[tid] = false; |
| } |
| |
| TheISA::TLB* |
| InOrderCPU::getITBPtr() |
| { |
| CacheUnit *itb_res = resPool->getInstUnit(); |
| return itb_res->tlb(); |
| } |
| |
| |
| TheISA::TLB* |
| InOrderCPU::getDTBPtr() |
| { |
| return resPool->getDataUnit()->tlb(); |
| } |
| |
| Decoder * |
| InOrderCPU::getDecoderPtr() |
| { |
| return &resPool->getInstUnit()->decoder; |
| } |
| |
| Fault |
| InOrderCPU::read(DynInstPtr inst, Addr addr, |
| uint8_t *data, unsigned size, unsigned flags) |
| { |
| return resPool->getDataUnit()->read(inst, addr, data, size, flags); |
| } |
| |
| Fault |
| InOrderCPU::write(DynInstPtr inst, uint8_t *data, unsigned size, |
| Addr addr, unsigned flags, uint64_t *write_res) |
| { |
| return resPool->getDataUnit()->write(inst, data, size, addr, flags, |
| write_res); |
| } |
