src/mem/ruby/network/orion/Crossbar/MultreeCrossbar.cc

/*
 * Copyright (c) 2009 Princeton University, and
 *                    Regents of the University of California
 * All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions are
 * met: redistributions of source code must retain the above copyright
 * notice, this list of conditions and the following disclaimer;
 * redistributions in binary form must reproduce the above copyright
 * notice, this list of conditions and the following disclaimer in the
 * documentation and/or other materials provided with the distribution;
 * neither the name of the copyright holders nor the names of its
 * contributors may be used to endorse or promote products derived from
 * this software without specific prior written permission.
 *
 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
 * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
 * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
 * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
 * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 *
 * Authors:  Hangsheng Wang (Orion 1.0, Princeton)
 *           Xinping Zhu (Orion 1.0, Princeton)
 *           Xuning Chen (Orion 1.0, Princeton)
 *           Bin Li (Orion 2.0, Princeton)
 *           Kambiz Samadi (Orion 2.0, UC San Diego)
 */

#include <cmath>
#include <iostream>

#include "mem/ruby/network/orion/Crossbar/MultreeCrossbar.hh"
#include "mem/ruby/network/orion/TechParameter.hh"

using namespace std;

MultreeCrossbar::MultreeCrossbar(
        const string& conn_type_str_, 
        const string& trans_type_str_, 
        uint32_t num_in_, 
        uint32_t num_out_, 
        uint32_t data_width_, 
        uint32_t degree_,
        const TechParameter *tech_param_ptr_
        ) : Crossbar(
            MULTREE_CROSSBAR, conn_type_str_, trans_type_str_,
            num_in_, num_out_, data_width_, 0, 0, degree_, tech_param_ptr_)
{
    m_len_req_wire = 0;
    init();
}

MultreeCrossbar::~MultreeCrossbar()
{}

double MultreeCrossbar::get_dynamic_energy(bool is_max_) const
{
    double e_atomic;
    double e_access = 0;

    e_atomic = m_e_chg_in*m_data_width*(is_max_? 1:0.5);
    e_access += e_atomic;

    e_atomic = m_e_chg_out*m_data_width*(is_max_? 1:0.5);
    e_access += e_atomic;

    e_atomic = m_e_chg_ctr;
    e_access += e_atomic;

    if (m_depth > 1)
    {
        e_atomic = m_e_chg_int*m_data_width*(m_depth-1)*(is_max_? 1:0.5);
        e_access += e_atomic;
    }

    return e_access;
}

void MultreeCrossbar::init()
{
    double CrsbarCellWidth = m_tech_param_ptr->get_CrsbarCellWidth();
    double CCmetal = m_tech_param_ptr->get_CCmetal();
    double Lamda = m_tech_param_ptr->get_Lamda();
    double CC3metal = m_tech_param_ptr->get_CC3metal();

    double len_in_wire;
    // input wire horizontal segment length
    len_in_wire = m_num_in*m_data_width*CrsbarCellWidth*(m_num_out/2);
    m_cap_in_wire = len_in_wire*CCmetal;
    // input wire vertical segment length
    len_in_wire = m_num_in*m_data_width*(5*Lamda)*(m_num_out/2);
    m_cap_in_wire += len_in_wire*CC3metal;
    m_cap_out_wire = 0;

    double Cmetal = m_tech_param_ptr->get_Cmetal();
    double len_ctr_wire = m_num_in*m_data_width*CrsbarCellWidth*(m_num_out/2)/2;
    m_cap_ctr_wire = Cmetal*len_ctr_wire;

    double e_factor = m_tech_param_ptr->get_EnergyFactor();
    m_e_chg_in = calc_in_cap()*e_factor;
    m_e_chg_out = calc_out_cap(m_degree)*e_factor;
    m_e_chg_int = calc_int_cap()*e_factor;

    m_depth = (uint32_t)ceil(log((double)m_num_in)/log((double)m_degree));

    // control signal should reset after transmission is done
    if (m_depth == 1)
    {
        // only one level of control sigal
        m_e_chg_ctr = calc_ctr_cap(m_cap_ctr_wire, 0, 0)*e_factor;
    }
    else
    {
        // first level and last level control signals
        m_e_chg_ctr = calc_ctr_cap(m_cap_ctr_wire, 0, 1)*e_factor + calc_ctr_cap(0, 1, 0)*e_factor;
        // intermediate control signals
        if (m_depth > 2)
        {
            m_e_chg_ctr += (m_depth-2)*calc_ctr_cap(0, 1, 1)*e_factor;
        }
    }

    m_i_static = calc_i_static();
}

double MultreeCrossbar::calc_i_static()
{
    double Wdecinvn = m_tech_param_ptr->get_Wdecinvn();
    double Wdecinvp = m_tech_param_ptr->get_Wdecinvp();
    double Woutdrivern = m_tech_param_ptr->get_Woutdrivern();
    double Woutdriverp = m_tech_param_ptr->get_Woutdriverp();
    double WdecNORn = m_tech_param_ptr->get_WdecNORn();
    double WdecNORp = m_tech_param_ptr->get_WdecNORp();
    double NOR2_TAB_0 = m_tech_param_ptr->get_NOR2_TAB(0);
    double NOR2_TAB_1 = m_tech_param_ptr->get_NOR2_TAB(1);
    double NOR2_TAB_2 = m_tech_param_ptr->get_NOR2_TAB(2);
    double NOR2_TAB_3 = m_tech_param_ptr->get_NOR2_TAB(3);
    double NMOS_TAB_0 = m_tech_param_ptr->get_NMOS_TAB(0);
    double PMOS_TAB_0 = m_tech_param_ptr->get_PMOS_TAB(0);

    double i_static = 0;

    // input driver
    i_static += (Wdecinvn*NMOS_TAB_0+Wdecinvp*PMOS_TAB_0)*m_num_in*m_data_width;

    // output driver
    i_static += (Woutdrivern*NMOS_TAB_0+Woutdriverp*PMOS_TAB_0)*m_num_out*m_data_width;

    // mux
    i_static += (WdecNORp*NOR2_TAB_0+WdecNORn*(NOR2_TAB_1+NOR2_TAB_2+NOR2_TAB_3))/4*(2*m_num_in-1)*m_num_out*m_data_width;

    // control signal inverter
    i_static += (Wdecinvn*NMOS_TAB_0+Wdecinvp*PMOS_TAB_0)*m_num_in*m_num_out;
    return i_static;
}