src/dev/arm/rv_ctrl.cc - amd/gem5 - Git at Google

 /*
  * Copyright (c) 2010,2013,2015 ARM Limited
  * All rights reserved
  *
  * The license below extends only to copyright in the software and shall
  * not be construed as granting a license to any other intellectual
  * property including but not limited to intellectual property relating
  * to a hardware implementation of the functionality of the software
  * licensed hereunder.  You may use the software subject to the license
  * terms below provided that you ensure that this notice is replicated
  * unmodified and in its entirety in all distributions of the software,
  * modified or unmodified, in source code or in binary form.
  *
  * Redistribution and use in source and binary forms, with or without
  * modification, are permitted provided that the following conditions are
  * met: redistributions of source code must retain the above copyright
  * notice, this list of conditions and the following disclaimer;
  * redistributions in binary form must reproduce the above copyright
  * notice, this list of conditions and the following disclaimer in the
  * documentation and/or other materials provided with the distribution;
  * neither the name of the copyright holders nor the names of its
  * contributors may be used to endorse or promote products derived from
  * this software without specific prior written permission.
  *
  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
  * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
  * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
  * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
  * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
  * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
  * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
  * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
  * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
  * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  *
  * Authors: Ali Saidi
  */

 #include "dev/arm/rv_ctrl.hh"

 #include "base/trace.hh"
 #include "debug/RVCTRL.hh"
 #include "mem/packet.hh"
 #include "mem/packet_access.hh"
 #include "sim/power/thermal_model.hh"
 #include "sim/system.hh"
 #include "sim/voltage_domain.hh"

 RealViewCtrl::RealViewCtrl(Params *p)
     : BasicPioDevice(p, 0xD4), flags(0), scData(0)
 {
 }

 Tick
 RealViewCtrl::read(PacketPtr pkt)
 {
     assert(pkt->getAddr() >= pioAddr && pkt->getAddr() < pioAddr + pioSize);
     assert(pkt->getSize() == 4);
     Addr daddr = pkt->getAddr() - pioAddr;

     switch(daddr) {
       case ProcId0:
         pkt->set(params()->proc_id0);
         break;
       case ProcId1:
         pkt->set(params()->proc_id1);
         break;
       case Clock24:
         Tick clk;
         clk = SimClock::Float::MHz * curTick() * 24;
         pkt->set((uint32_t)(clk));
         break;
       case Clock100:
         Tick clk100;
         clk100 = SimClock::Float::MHz * curTick() * 100;
         pkt->set((uint32_t)(clk100));
         break;
       case Flash:
         pkt->set<uint32_t>(0);
         break;
       case Clcd:
         pkt->set<uint32_t>(0x00001F00);
         break;
       case Osc0:
         pkt->set<uint32_t>(0x00012C5C);
         break;
       case Osc1:
         pkt->set<uint32_t>(0x00002CC0);
         break;
       case Osc2:
         pkt->set<uint32_t>(0x00002C75);
         break;
       case Osc3:
         pkt->set<uint32_t>(0x00020211);
         break;
       case Osc4:
         pkt->set<uint32_t>(0x00002C75);
         break;
       case Lock:
         pkt->set<uint32_t>(sysLock);
         break;
       case Flags:
         pkt->set<uint32_t>(flags);
         break;
       case IdReg:
         pkt->set<uint32_t>(params()->idreg);
         break;
       case CfgStat:
         pkt->set<uint32_t>(1);
         break;
       case CfgData:
         pkt->set<uint32_t>(scData);
         DPRINTF(RVCTRL, "Read %#x from SCReg\n", scData);
         break;
       case CfgCtrl:
         pkt->set<uint32_t>(0); // not busy
         DPRINTF(RVCTRL, "Read 0 from CfgCtrl\n");
         break;
       default:
         warn("Tried to read RealView I/O at offset %#x that doesn't exist\n",
              daddr);
         pkt->set<uint32_t>(0);
         break;
     }
     pkt->makeAtomicResponse();
     return pioDelay;

 }

 Tick
 RealViewCtrl::write(PacketPtr pkt)
 {
     assert(pkt->getAddr() >= pioAddr && pkt->getAddr() < pioAddr + pioSize);

     Addr daddr = pkt->getAddr() - pioAddr;
     switch (daddr) {
       case Flash:
       case Clcd:
       case Osc0:
       case Osc1:
       case Osc2:
       case Osc3:
       case Osc4:
         break;
       case Lock:
         sysLock.lockVal = pkt->get<uint16_t>();
         break;
       case ResetCtl:
         // Ignore writes to reset control
         warn_once("Ignoring write to reset control\n");
         break;
       case Flags:
         flags = pkt->get<uint32_t>();
         break;
       case FlagsClr:
         flags = 0;
         break;
       case CfgData:
         scData = pkt->get<uint32_t>();
         break;
       case CfgCtrl: {
           // A request is being submitted to read/write the system control
           // registers.  See
           // http://infocenter.arm.com/help/topic/com.arm.doc.dui0447h/CACDEFGH.html
           CfgCtrlReg req = pkt->get<uint32_t>();
           if (!req.start) {
               DPRINTF(RVCTRL, "SCReg: write %#x to ctrl but not starting\n",
                       req);
               break;
           }

           auto it_dev(devices.find(req & CFG_CTRL_ADDR_MASK));
           if (it_dev == devices.end()) {
               warn_once("SCReg: Access to unknown device "
                         "dcc%d:site%d:pos%d:fn%d:dev%d\n",
                         req.dcc, req.site, req.pos, req.func, req.dev);
               break;
           }

           // Service the request as a read or write depending on the
           // wr bit in the control register.
           Device &dev(*it_dev->second);
           if (req.wr) {
               DPRINTF(RVCTRL, "SCReg: Writing %#x (ctrlWr %#x)\n",
                       scData, req);
               dev.write(scData);

           } else {
               scData = dev.read();
               DPRINTF(RVCTRL, "SCReg: Reading %#x (ctrlRd %#x)\n",
                       scData, req);
           }
       } break;
       case CfgStat:     // Weird to write this
       default:
         warn("Tried to write RVIO at offset %#x (data %#x) that doesn't exist\n",
              daddr, pkt->get<uint32_t>());
         break;
     }
     pkt->makeAtomicResponse();
     return pioDelay;
 }

 void
 RealViewCtrl::serialize(CheckpointOut &cp) const
 {
     SERIALIZE_SCALAR(flags);
 }

 void
 RealViewCtrl::unserialize(CheckpointIn &cp)
 {
     UNSERIALIZE_SCALAR(flags);
 }

 void
 RealViewCtrl::registerDevice(DeviceFunc func, uint8_t site, uint8_t pos,
                              uint8_t dcc, uint16_t dev,
                              Device *handler)
 {
     CfgCtrlReg addr = 0;
     addr.func = func;
     addr.site = site;
     addr.pos = pos;
     addr.dcc = dcc;
     addr.dev = dev;

     if (devices.find(addr) != devices.end()) {
         fatal("Platform device dcc%d:site%d:pos%d:fn%d:dev%d "
               "already registered.",
               addr.dcc, addr.site, addr.pos, addr.func, addr.dev);
     }

     devices[addr] = handler;
 }


 RealViewOsc::RealViewOsc(RealViewOscParams *p)
     : ClockDomain(p, p->voltage_domain),
       RealViewCtrl::Device(*p->parent, RealViewCtrl::FUNC_OSC,
                            p->site, p->position, p->dcc, p->device)
 {
     if (SimClock::Float::s  / p->freq > UINT32_MAX) {
         fatal("Oscillator frequency out of range: %f\n",
             SimClock::Float::s  / p->freq / 1E6);
     }

     _clockPeriod = p->freq;
 }

 void
 RealViewOsc::startup()
 {
     // Tell dependent object to set their clock frequency
     for (auto m : members)
         m->updateClockPeriod();
 }

 void
 RealViewOsc::serialize(CheckpointOut &cp) const
 {
     SERIALIZE_SCALAR(_clockPeriod);
 }

 void
 RealViewOsc::unserialize(CheckpointIn &cp)
 {
     UNSERIALIZE_SCALAR(_clockPeriod);
 }

 void
 RealViewOsc::clockPeriod(Tick clock_period)
 {
     panic_if(clock_period == 0, "%s has a clock period of zero\n", name());

     // Align all members to the current tick
     for (auto m : members)
         m->updateClockPeriod();

     _clockPeriod = clock_period;

     // inform any derived clocks they need to updated their period
     for (auto m : children)
         m->updateClockPeriod();
 }

 uint32_t
 RealViewOsc::read() const
 {
     const uint32_t freq(SimClock::Float::s / _clockPeriod);
     DPRINTF(RVCTRL, "Reading OSC frequency: %f MHz\n", freq / 1E6);
     return freq;
 }

 void
 RealViewOsc::write(uint32_t freq)
 {
     DPRINTF(RVCTRL, "Setting new OSC frequency: %f MHz\n", freq / 1E6);
     clockPeriod(SimClock::Float::s / freq);
 }

 uint32_t
 RealViewTemperatureSensor::read() const
 {
     // Temperature reported in uC
     ThermalModel * tm = system->getThermalModel();
     if (tm) {
         double t = tm->getTemp();
         if (t < 0)
             warn("Temperature below zero!\n");
         return fmax(0, t) * 1000000;
     }

     // Report a dummy 25 degrees temperature
     return 25000000;
 }

 RealViewCtrl *
 RealViewCtrlParams::create()
 {
     return new RealViewCtrl(this);
 }

 RealViewOsc *
 RealViewOscParams::create()
 {
     return new RealViewOsc(this);
 }

 RealViewTemperatureSensor *
 RealViewTemperatureSensorParams::create()
 {
     return new RealViewTemperatureSensor(this);
 }
	/*
	* Copyright (c) 2010,2013,2015 ARM Limited
	* All rights reserved
	*
	* The license below extends only to copyright in the software and shall
	* not be construed as granting a license to any other intellectual
	* property including but not limited to intellectual property relating
	* to a hardware implementation of the functionality of the software
	* licensed hereunder. You may use the software subject to the license
	* terms below provided that you ensure that this notice is replicated
	* unmodified and in its entirety in all distributions of the software,
	* modified or unmodified, in source code or in binary form.
	*
	* Redistribution and use in source and binary forms, with or without
	* modification, are permitted provided that the following conditions are
	* met: redistributions of source code must retain the above copyright
	* notice, this list of conditions and the following disclaimer;
	* redistributions in binary form must reproduce the above copyright
	* notice, this list of conditions and the following disclaimer in the
	* documentation and/or other materials provided with the distribution;
	* neither the name of the copyright holders nor the names of its
	* contributors may be used to endorse or promote products derived from
	* this software without specific prior written permission.
	*
	* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
	* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
	* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
	* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
	* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
	* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
	* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
	* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
	* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
	* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
	* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
	*
	* Authors: Ali Saidi
	*/

	#include "dev/arm/rv_ctrl.hh"

	#include "base/trace.hh"
	#include "debug/RVCTRL.hh"
	#include "mem/packet.hh"
	#include "mem/packet_access.hh"
	#include "sim/power/thermal_model.hh"
	#include "sim/system.hh"
	#include "sim/voltage_domain.hh"

	RealViewCtrl::RealViewCtrl(Params *p)
	: BasicPioDevice(p, 0xD4), flags(0), scData(0)
	{
	}

	Tick
	RealViewCtrl::read(PacketPtr pkt)
	{
	assert(pkt->getAddr() >= pioAddr && pkt->getAddr() < pioAddr + pioSize);
	assert(pkt->getSize() == 4);
	Addr daddr = pkt->getAddr() - pioAddr;

	switch(daddr) {
	case ProcId0:
	pkt->set(params()->proc_id0);
	break;
	case ProcId1:
	pkt->set(params()->proc_id1);
	break;
	case Clock24:
	Tick clk;
	clk = SimClock::Float::MHz * curTick() * 24;
	pkt->set((uint32_t)(clk));
	break;
	case Clock100:
	Tick clk100;
	clk100 = SimClock::Float::MHz * curTick() * 100;
	pkt->set((uint32_t)(clk100));
	break;
	case Flash:
	pkt->set<uint32_t>(0);
	break;
	case Clcd:
	pkt->set<uint32_t>(0x00001F00);
	break;
	case Osc0:
	pkt->set<uint32_t>(0x00012C5C);
	break;
	case Osc1:
	pkt->set<uint32_t>(0x00002CC0);
	break;
	case Osc2:
	pkt->set<uint32_t>(0x00002C75);
	break;
	case Osc3:
	pkt->set<uint32_t>(0x00020211);
	break;
	case Osc4:
	pkt->set<uint32_t>(0x00002C75);
	break;
	case Lock:
	pkt->set<uint32_t>(sysLock);
	break;
	case Flags:
	pkt->set<uint32_t>(flags);
	break;
	case IdReg:
	pkt->set<uint32_t>(params()->idreg);
	break;
	case CfgStat:
	pkt->set<uint32_t>(1);
	break;
	case CfgData:
	pkt->set<uint32_t>(scData);
	DPRINTF(RVCTRL, "Read %#x from SCReg\n", scData);
	break;
	case CfgCtrl:
	pkt->set<uint32_t>(0); // not busy
	DPRINTF(RVCTRL, "Read 0 from CfgCtrl\n");
	break;
	default:
	warn("Tried to read RealView I/O at offset %#x that doesn't exist\n",
	daddr);
	pkt->set<uint32_t>(0);
	break;
	}
	pkt->makeAtomicResponse();
	return pioDelay;

	}

	Tick
	RealViewCtrl::write(PacketPtr pkt)
	{
	assert(pkt->getAddr() >= pioAddr && pkt->getAddr() < pioAddr + pioSize);

	Addr daddr = pkt->getAddr() - pioAddr;
	switch (daddr) {
	case Flash:
	case Clcd:
	case Osc0:
	case Osc1:
	case Osc2:
	case Osc3:
	case Osc4:
	break;
	case Lock:
	sysLock.lockVal = pkt->get<uint16_t>();
	break;
	case ResetCtl:
	// Ignore writes to reset control
	warn_once("Ignoring write to reset control\n");
	break;
	case Flags:
	flags = pkt->get<uint32_t>();
	break;
	case FlagsClr:
	flags = 0;
	break;
	case CfgData:
	scData = pkt->get<uint32_t>();
	break;
	case CfgCtrl: {
	// A request is being submitted to read/write the system control
	// registers. See
	// http://infocenter.arm.com/help/topic/com.arm.doc.dui0447h/CACDEFGH.html
	CfgCtrlReg req = pkt->get<uint32_t>();
	if (!req.start) {
	DPRINTF(RVCTRL, "SCReg: write %#x to ctrl but not starting\n",
	req);
	break;
	}

	auto it_dev(devices.find(req & CFG_CTRL_ADDR_MASK));
	if (it_dev == devices.end()) {
	warn_once("SCReg: Access to unknown device "
	"dcc%d:site%d:pos%d:fn%d:dev%d\n",
	req.dcc, req.site, req.pos, req.func, req.dev);
	break;
	}

	// Service the request as a read or write depending on the
	// wr bit in the control register.
	Device &dev(*it_dev->second);
	if (req.wr) {
	DPRINTF(RVCTRL, "SCReg: Writing %#x (ctrlWr %#x)\n",
	scData, req);
	dev.write(scData);

	} else {
	scData = dev.read();
	DPRINTF(RVCTRL, "SCReg: Reading %#x (ctrlRd %#x)\n",
	scData, req);
	}
	} break;
	case CfgStat: // Weird to write this
	default:
	warn("Tried to write RVIO at offset %#x (data %#x) that doesn't exist\n",
	daddr, pkt->get<uint32_t>());
	break;
	}
	pkt->makeAtomicResponse();
	return pioDelay;
	}

	void
	RealViewCtrl::serialize(CheckpointOut &cp) const
	{
	SERIALIZE_SCALAR(flags);
	}

	void
	RealViewCtrl::unserialize(CheckpointIn &cp)
	{
	UNSERIALIZE_SCALAR(flags);
	}

	void
	RealViewCtrl::registerDevice(DeviceFunc func, uint8_t site, uint8_t pos,
	uint8_t dcc, uint16_t dev,
	Device *handler)
	{
	CfgCtrlReg addr = 0;
	addr.func = func;
	addr.site = site;
	addr.pos = pos;
	addr.dcc = dcc;
	addr.dev = dev;

	if (devices.find(addr) != devices.end()) {
	fatal("Platform device dcc%d:site%d:pos%d:fn%d:dev%d "
	"already registered.",
	addr.dcc, addr.site, addr.pos, addr.func, addr.dev);
	}

	devices[addr] = handler;
	}


	RealViewOsc::RealViewOsc(RealViewOscParams *p)
	: ClockDomain(p, p->voltage_domain),
	RealViewCtrl::Device(*p->parent, RealViewCtrl::FUNC_OSC,
	p->site, p->position, p->dcc, p->device)
	{
	if (SimClock::Float::s / p->freq > UINT32_MAX) {
	fatal("Oscillator frequency out of range: %f\n",
	SimClock::Float::s / p->freq / 1E6);
	}

	_clockPeriod = p->freq;
	}

	void
	RealViewOsc::startup()
	{
	// Tell dependent object to set their clock frequency
	for (auto m : members)
	m->updateClockPeriod();
	}

	void
	RealViewOsc::serialize(CheckpointOut &cp) const
	{
	SERIALIZE_SCALAR(_clockPeriod);
	}

	void
	RealViewOsc::unserialize(CheckpointIn &cp)
	{
	UNSERIALIZE_SCALAR(_clockPeriod);
	}

	void
	RealViewOsc::clockPeriod(Tick clock_period)
	{
	panic_if(clock_period == 0, "%s has a clock period of zero\n", name());

	// Align all members to the current tick
	for (auto m : members)
	m->updateClockPeriod();

	_clockPeriod = clock_period;

	// inform any derived clocks they need to updated their period
	for (auto m : children)
	m->updateClockPeriod();
	}

	uint32_t
	RealViewOsc::read() const
	{
	const uint32_t freq(SimClock::Float::s / _clockPeriod);
	DPRINTF(RVCTRL, "Reading OSC frequency: %f MHz\n", freq / 1E6);
	return freq;
	}

	void
	RealViewOsc::write(uint32_t freq)
	{
	DPRINTF(RVCTRL, "Setting new OSC frequency: %f MHz\n", freq / 1E6);
	clockPeriod(SimClock::Float::s / freq);
	}

	uint32_t
	RealViewTemperatureSensor::read() const
	{
	// Temperature reported in uC
	ThermalModel * tm = system->getThermalModel();
	if (tm) {
	double t = tm->getTemp();
	if (t < 0)
	warn("Temperature below zero!\n");
	return fmax(0, t) * 1000000;
	}

	// Report a dummy 25 degrees temperature
	return 25000000;
	}

	RealViewCtrl *
	RealViewCtrlParams::create()
	{
	return new RealViewCtrl(this);
	}

	RealViewOsc *
	RealViewOscParams::create()
	{
	return new RealViewOsc(this);
	}

	RealViewTemperatureSensor *
	RealViewTemperatureSensorParams::create()
	{
	return new RealViewTemperatureSensor(this);
	}