| #!/usr/bin/env python |
| |
| # Copyright (c) 2012-2013 ARM Limited |
| # All rights reserved |
| # |
| # The license below extends only to copyright in the software and shall |
| # not be construed as granting a license to any other intellectual |
| # property including but not limited to intellectual property relating |
| # to a hardware implementation of the functionality of the software |
| # licensed hereunder. You may use the software subject to the license |
| # terms below provided that you ensure that this notice is replicated |
| # unmodified and in its entirety in all distributions of the software, |
| # modified or unmodified, in source code or in binary form. |
| # |
| # Redistribution and use in source and binary forms, with or without |
| # modification, are permitted provided that the following conditions are |
| # met: redistributions of source code must retain the above copyright |
| # notice, this list of conditions and the following disclaimer; |
| # redistributions in binary form must reproduce the above copyright |
| # notice, this list of conditions and the following disclaimer in the |
| # documentation and/or other materials provided with the distribution; |
| # neither the name of the copyright holders nor the names of its |
| # contributors may be used to endorse or promote products derived from |
| # this software without specific prior written permission. |
| # |
| # THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS |
| # "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT |
| # LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR |
| # A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT |
| # OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, |
| # SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT |
| # LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, |
| # DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY |
| # THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT |
| # (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE |
| # OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. |
| # |
| # Authors: Ali Saidi |
| # |
| |
| # This python code is used to migrate checkpoints that were created in one |
| # version of the simulator to newer version. As features are added or bugs are |
| # fixed some of the state that needs to be checkpointed can change. If you have |
| # many historic checkpoints that you use, manually editing them to fix them is |
| # both time consuming and error-prone. |
| |
| # This script provides a way to migrate checkpoints to the newer repository in |
| # a programatic way. It can be imported into another script or used on the |
| # command line. From the command line the script will either migrate every |
| # checkpoint it finds recursively (-r option) or a single checkpoint. When a |
| # change is made to the gem5 repository that breaks previous checkpoints a |
| # from_N() method should be implemented here and the gem5CheckpointVersion |
| # variable in src/sim/serialize.hh should be incremented. For each version |
| # between the checkpoints current version and the new version the from_N() |
| # method will be run, passing in a ConfigParser object which contains the open |
| # file. As these operations can be isa specific the method can verify the isa |
| # and use regexes to find the correct sections that need to be updated. |
| |
| |
| import ConfigParser |
| import sys, os |
| import os.path as osp |
| |
| # An example of a translator |
| def from_0(cpt): |
| if cpt.get('root','isa') == 'arm': |
| for sec in cpt.sections(): |
| import re |
| # Search for all the execution contexts |
| if re.search('.*sys.*\.cpu.*\.x.\..*', sec): |
| # Update each one |
| mr = cpt.get(sec, 'miscRegs').split() |
| #mr.insert(21,0) |
| #mr.insert(26,0) |
| cpt.set(sec, 'miscRegs', ' '.join(str(x) for x in mr)) |
| |
| # The backing store supporting the memories in the system has changed |
| # in that it is now stored globally per address range. As a result the |
| # actual storage is separate from the memory controllers themselves. |
| def from_1(cpt): |
| for sec in cpt.sections(): |
| import re |
| # Search for a physical memory |
| if re.search('.*sys.*\.physmem$', sec): |
| # Add the number of stores attribute to the global physmem |
| cpt.set(sec, 'nbr_of_stores', '1') |
| |
| # Get the filename and size as this is moving to the |
| # specific backing store |
| mem_filename = cpt.get(sec, 'filename') |
| mem_size = cpt.get(sec, '_size') |
| cpt.remove_option(sec, 'filename') |
| cpt.remove_option(sec, '_size') |
| |
| # Get the name so that we can create the new section |
| system_name = str(sec).split('.')[0] |
| section_name = system_name + '.physmem.store0' |
| cpt.add_section(section_name) |
| cpt.set(section_name, 'store_id', '0') |
| cpt.set(section_name, 'range_size', mem_size) |
| cpt.set(section_name, 'filename', mem_filename) |
| elif re.search('.*sys.*\.\w*mem$', sec): |
| # Due to the lack of information about a start address, |
| # this migration only works if there is a single memory in |
| # the system, thus starting at 0 |
| raise ValueError("more than one memory detected (" + sec + ")") |
| |
| def from_2(cpt): |
| for sec in cpt.sections(): |
| import re |
| # Search for a CPUs |
| if re.search('.*sys.*cpu', sec): |
| try: |
| junk = cpt.get(sec, 'instCnt') |
| cpt.set(sec, '_pid', '0') |
| except ConfigParser.NoOptionError: |
| pass |
| |
| # The ISA is now a separate SimObject, which means that we serialize |
| # it in a separate section instead of as a part of the ThreadContext. |
| def from_3(cpt): |
| isa = cpt.get('root','isa') |
| isa_fields = { |
| "alpha" : ( "fpcr", "uniq", "lock_flag", "lock_addr", "ipr" ), |
| "arm" : ( "miscRegs" ), |
| "sparc" : ( "asi", "tick", "fprs", "gsr", "softint", "tick_cmpr", |
| "stick", "stick_cmpr", "tpc", "tnpc", "tstate", "tt", |
| "tba", "pstate", "tl", "pil", "cwp", "gl", "hpstate", |
| "htstate", "hintp", "htba", "hstick_cmpr", |
| "strandStatusReg", "fsr", "priContext", "secContext", |
| "partId", "lsuCtrlReg", "scratchPad", |
| "cpu_mondo_head", "cpu_mondo_tail", |
| "dev_mondo_head", "dev_mondo_tail", |
| "res_error_head", "res_error_tail", |
| "nres_error_head", "nres_error_tail", |
| "tick_intr_sched", |
| "cpu", "tc_num", "tick_cmp", "stick_cmp", "hstick_cmp"), |
| "x86" : ( "regVal" ), |
| } |
| |
| isa_fields = isa_fields.get(isa, []) |
| isa_sections = [] |
| for sec in cpt.sections(): |
| import re |
| |
| re_cpu_match = re.match('^(.*sys.*\.cpu[^.]*)\.xc\.(.+)$', sec) |
| # Search for all the execution contexts |
| if not re_cpu_match: |
| continue |
| |
| if re_cpu_match.group(2) != "0": |
| # This shouldn't happen as we didn't support checkpointing |
| # of in-order and O3 CPUs. |
| raise ValueError("Don't know how to migrate multi-threaded CPUs " |
| "from version 1") |
| |
| isa_section = [] |
| for fspec in isa_fields: |
| for (key, value) in cpt.items(sec, raw=True): |
| if key in isa_fields: |
| isa_section.append((key, value)) |
| |
| name = "%s.isa" % re_cpu_match.group(1) |
| isa_sections.append((name, isa_section)) |
| |
| for (key, value) in isa_section: |
| cpt.remove_option(sec, key) |
| |
| for (sec, options) in isa_sections: |
| # Some intermediate versions of gem5 have empty ISA sections |
| # (after we made the ISA a SimObject, but before we started to |
| # serialize into a separate ISA section). |
| if not cpt.has_section(sec): |
| cpt.add_section(sec) |
| else: |
| if cpt.items(sec): |
| raise ValueError("Unexpected populated ISA section in old " |
| "checkpoint") |
| |
| for (key, value) in options: |
| cpt.set(sec, key, value) |
| |
| # Version 5 of the checkpoint format removes the MISCREG_CPSR_MODE |
| # register from the ARM register file. |
| def from_4(cpt): |
| if cpt.get('root','isa') == 'arm': |
| for sec in cpt.sections(): |
| import re |
| # Search for all ISA sections |
| if re.search('.*sys.*\.cpu.*\.isa', sec): |
| mr = cpt.get(sec, 'miscRegs').split() |
| # Remove MISCREG_CPSR_MODE |
| del mr[137] |
| cpt.set(sec, 'miscRegs', ' '.join(str(x) for x in mr)) |
| |
| # Version 6 of the checkpoint format adds tlb to x86 checkpoints |
| def from_5(cpt): |
| if cpt.get('root','isa') == 'x86': |
| for sec in cpt.sections(): |
| import re |
| # Search for all ISA sections |
| if re.search('.*sys.*\.cpu.*\.dtb$', sec): |
| cpt.set(sec, '_size', '0') |
| cpt.set(sec, 'lruSeq', '0') |
| |
| if re.search('.*sys.*\.cpu.*\.itb$', sec): |
| cpt.set(sec, '_size', '0') |
| cpt.set(sec, 'lruSeq', '0') |
| else: |
| print "ISA is not x86" |
| |
| # Version 7 of the checkpoint adds support for the IDE dmaAbort flag |
| def from_6(cpt): |
| # Update IDE disk devices with dmaAborted |
| for sec in cpt.sections(): |
| # curSector only exists in IDE devices, so key on that attribute |
| if cpt.has_option(sec, "curSector"): |
| cpt.set(sec, "dmaAborted", "false") |
| |
| # Version 8 of the checkpoint adds an ARM MISCREG |
| def from_7(cpt): |
| if cpt.get('root','isa') == 'arm': |
| for sec in cpt.sections(): |
| import re |
| # Search for all ISA sections |
| if re.search('.*sys.*\.cpu.*\.isa', sec): |
| mr = cpt.get(sec, 'miscRegs').split() |
| if len(mr) == 161: |
| print "MISCREG_TEEHBR already seems to be inserted." |
| else: |
| # Add dummy value for MISCREG_TEEHBR |
| mr.insert(51,0); |
| cpt.set(sec, 'miscRegs', ' '.join(str(x) for x in mr)) |
| |
| # Version 9 of the checkpoint adds an all ARMv8 state |
| def from_8(cpt): |
| if cpt.get('root','isa') != 'arm': |
| return |
| import re |
| print "Warning: The size of the FP register file has changed. "\ |
| "To get similar results you need to adjust the number of "\ |
| "physical registers in the CPU you're restoring into by "\ |
| "NNNN." |
| # Find the CPU context's and upgrade their registers |
| for sec in cpt.sections(): |
| re_xc_match = re.match('^.*?sys.*?\.cpu(\d+)*\.xc\.*', sec) |
| if not re_xc_match: |
| continue |
| |
| # Update floating point regs |
| fpr = cpt.get(sec, 'floatRegs.i').split() |
| # v8 has 128 normal fp and 32 special fp regs compared |
| # to v7's 64 normal fp and 8 special fp regs. |
| # Insert the extra normal fp registers at end of v7 normal fp regs |
| for x in xrange(64): |
| fpr.insert(64, "0") |
| # Append the extra special registers |
| for x in xrange(24): |
| fpr.append("0") |
| cpt.set(sec, 'floatRegs.i', ' '.join(str(x) for x in fpr)) |
| |
| ir = cpt.get(sec, 'intRegs').split() |
| # Add in v8 int reg state |
| # Splice in R13_HYP |
| ir.insert(20, "0") |
| # Splice in INTREG_DUMMY and SP0 - SP3 |
| ir.extend(["0", "0", "0", "0", "0"]) |
| cpt.set(sec, 'intRegs', ' '.join(str(x) for x in ir)) |
| |
| # Update the cpu interrupt field |
| for sec in cpt.sections(): |
| re_int_match = re.match("^.*?sys.*?\.cpu(\d+)*$", sec) |
| if not re_int_match: |
| continue |
| |
| irqs = cpt.get(sec, "interrupts").split() |
| irqs.append("false") |
| irqs.append("false") |
| cpt.set(sec, "interrupts", ' '.join(str(x) for x in irqs)) |
| |
| # Update the per cpu interrupt structure |
| for sec in cpt.sections(): |
| re_int_match = re.match("^.*?sys.*?\.cpu(\d+)*\.interrupts$", sec) |
| if not re_int_match: |
| continue |
| |
| irqs = cpt.get(sec, "interrupts").split() |
| irqs.append("false") |
| irqs.append("false") |
| cpt.set(sec, "interrupts", ' '.join(str(x) for x in irqs)) |
| |
| # Update the misc regs and add in new isa specific fields |
| for sec in cpt.sections(): |
| re_isa_match = re.match("^.*?sys.*?\.cpu(\d+)*\.isa$", sec) |
| if not re_isa_match: |
| continue |
| |
| cpt.set(sec, 'haveSecurity', 'false') |
| cpt.set(sec, 'haveLPAE', 'false') |
| cpt.set(sec, 'haveVirtualization', 'false') |
| cpt.set(sec, 'haveLargeAsid64', 'false') |
| cpt.set(sec, 'physAddrRange64', '40') |
| |
| # splice in the new misc registers, ~200 -> 605 registers, |
| # ordering does not remain consistent |
| mr_old = cpt.get(sec, 'miscRegs').split() |
| mr_new = [ '0' for x in xrange(605) ] |
| |
| # map old v7 miscRegs to new v8 miscRegs |
| mr_new[0] = mr_old[0] # CPSR |
| mr_new[16] = mr_old[1] # CPSR_Q |
| mr_new[1] = mr_old[2] # SPSR |
| mr_new[2] = mr_old[3] # SPSR_FIQ |
| mr_new[3] = mr_old[4] # SPSR_IRQ |
| mr_new[4] = mr_old[5] # SPSR_SVC |
| mr_new[5] = mr_old[6] # SPSR_MON |
| mr_new[8] = mr_old[7] # SPSR_UND |
| mr_new[6] = mr_old[8] # SPSR_ABT |
| mr_new[432] = mr_old[9] # FPSR |
| mr_new[10] = mr_old[10] # FPSID |
| mr_new[11] = mr_old[11] # FPSCR |
| mr_new[18] = mr_old[12] # FPSCR_QC |
| mr_new[17] = mr_old[13] # FPSCR_EXC |
| mr_new[14] = mr_old[14] # FPEXC |
| mr_new[13] = mr_old[15] # MVFR0 |
| mr_new[12] = mr_old[16] # MVFR1 |
| mr_new[28] = mr_old[17] # SCTLR_RST, |
| mr_new[29] = mr_old[18] # SEV_MAILBOX, |
| mr_new[30] = mr_old[19] # DBGDIDR |
| mr_new[31] = mr_old[20] # DBGDSCR_INT, |
| mr_new[33] = mr_old[21] # DBGDTRRX_INT, |
| mr_new[34] = mr_old[22] # DBGTRTX_INT, |
| mr_new[35] = mr_old[23] # DBGWFAR, |
| mr_new[36] = mr_old[24] # DBGVCR, |
| #mr_new[] = mr_old[25] # DBGECR -> UNUSED, |
| #mr_new[] = mr_old[26] # DBGDSCCR -> UNUSED, |
| #mr_new[] = mr_old[27] # DBGSMCR -> UNUSED, |
| mr_new[37] = mr_old[28] # DBGDTRRX_EXT, |
| mr_new[38] = mr_old[29] # DBGDSCR_EXT, |
| mr_new[39] = mr_old[30] # DBGDTRTX_EXT, |
| #mr_new[] = mr_old[31] # DBGDRCR -> UNUSED, |
| mr_new[41] = mr_old[32] # DBGBVR, |
| mr_new[47] = mr_old[33] # DBGBCR, |
| #mr_new[] = mr_old[34] # DBGBVR_M -> UNUSED, |
| #mr_new[] = mr_old[35] # DBGBCR_M -> UNUSED, |
| mr_new[61] = mr_old[36] # DBGDRAR, |
| #mr_new[] = mr_old[37] # DBGBXVR_M -> UNUSED, |
| mr_new[64] = mr_old[38] # DBGOSLAR, |
| #mr_new[] = mr_old[39] # DBGOSSRR -> UNUSED, |
| mr_new[66] = mr_old[40] # DBGOSDLR, |
| mr_new[67] = mr_old[41] # DBGPRCR, |
| #mr_new[] = mr_old[42] # DBGPRSR -> UNUSED, |
| mr_new[68] = mr_old[43] # DBGDSAR, |
| #mr_new[] = mr_old[44] # DBGITCTRL -> UNUSED, |
| mr_new[69] = mr_old[45] # DBGCLAIMSET, |
| mr_new[70] = mr_old[46] # DBGCLAIMCLR, |
| mr_new[71] = mr_old[47] # DBGAUTHSTATUS, |
| mr_new[72] = mr_old[48] # DBGDEVID2, |
| mr_new[73] = mr_old[49] # DBGDEVID1, |
| mr_new[74] = mr_old[50] # DBGDEVID, |
| mr_new[77] = mr_old[51] # TEEHBR, |
| mr_new[109] = mr_old[52] # v7 SCTLR -> aarc32 SCTLR_NS |
| mr_new[189] = mr_old[53] # DCCISW, |
| mr_new[188] = mr_old[54] # DCCIMVAC, |
| mr_new[183] = mr_old[55] # DCCMVAC, |
| mr_new[271] = mr_old[56] # v7 CONTEXTIDR -> aarch32 CONTEXTIDR_NS, |
| mr_new[274] = mr_old[57] # v7 TPIDRURW -> aarch32 TPIDRURW_NS, |
| mr_new[277] = mr_old[58] # v7 TPIDRURO -> aarch32 TPIDRURO_NS, |
| mr_new[280] = mr_old[59] # v7 TPIDRPRW -> aarch32 TPIDRPRW_NS, |
| mr_new[170] = mr_old[60] # CP15ISB, |
| mr_new[185] = mr_old[61] # CP15DSB, |
| mr_new[186] = mr_old[62] # CP15DMB, |
| mr_new[114] = mr_old[63] # CPACR, |
| mr_new[101] = mr_old[64] # CLIDR, |
| mr_new[100] = mr_old[65] # CCSIDR, |
| mr_new[104] = mr_old[66] # v7 CSSELR -> aarch32 CSSELR_NS, |
| mr_new[163] = mr_old[67] # ICIALLUIS, |
| mr_new[168] = mr_old[68] # ICIALLU, |
| mr_new[169] = mr_old[69] # ICIMVAU, |
| mr_new[172] = mr_old[70] # BPIMVA, |
| mr_new[164] = mr_old[71] # BPIALLIS, |
| mr_new[171] = mr_old[72] # BPIALL, |
| mr_new[80] = mr_old[73] # MIDR, |
| mr_new[126] = mr_old[74] # v7 TTBR0 -> aarch32 TTBR0_NS, |
| mr_new[129] = mr_old[75] # v7 TTBR1 -> aarch32 TTBR1_NS, |
| mr_new[83] = mr_old[76] # TLBTR, |
| mr_new[137] = mr_old[77] # v7 DACR -> aarch32 DACR_NS, |
| mr_new[192] = mr_old[78] # TLBIALLIS, |
| mr_new[193] = mr_old[79] # TLBIMVAIS, |
| mr_new[194] = mr_old[80] # TLBIASIDIS, |
| mr_new[195] = mr_old[81] # TLBIMVAAIS, |
| mr_new[198] = mr_old[82] # ITLBIALL, |
| mr_new[199] = mr_old[83] # ITLBIMVA, |
| mr_new[200] = mr_old[84] # ITLBIASID, |
| mr_new[201] = mr_old[85] # DTLBIALL, |
| mr_new[202] = mr_old[86] # DTLBIMVA, |
| mr_new[203] = mr_old[87] # DTLBIASID, |
| mr_new[204] = mr_old[88] # TLBIALL, |
| mr_new[205] = mr_old[89] # TLBIMVA, |
| mr_new[206] = mr_old[90] # TLBIASID, |
| mr_new[207] = mr_old[91] # TLBIMVAA, |
| mr_new[140] = mr_old[92] # v7 DFSR -> aarch32 DFSR_NS, |
| mr_new[143] = mr_old[93] # v7 IFSR -> aarch32 IFSR_NS, |
| mr_new[155] = mr_old[94] # v7 DFAR -> aarch32 DFAR_NS, |
| mr_new[158] = mr_old[95] # v7 IFAR -> aarch32 IFAR_NS, |
| mr_new[84] = mr_old[96] # MPIDR, |
| mr_new[241] = mr_old[97] # v7 PRRR -> aarch32 PRRR_NS, |
| mr_new[247] = mr_old[98] # v7 NMRR -> aarch32 NMRR_NS, |
| mr_new[131] = mr_old[99] # TTBCR, |
| mr_new[86] = mr_old[100] # ID_PFR0, |
| mr_new[81] = mr_old[101] # CTR, |
| mr_new[115] = mr_old[102] # SCR, |
| # Set the non-secure bit |
| scr = int(mr_new[115]) |
| scr = scr | 0x1 |
| mr_new[115] = str(scr) |
| ### |
| mr_new[116] = mr_old[103] # SDER, |
| mr_new[165] = mr_old[104] # PAR, |
| mr_new[175] = mr_old[105] # V2PCWPR -> ATS1CPR, |
| mr_new[176] = mr_old[106] # V2PCWPW -> ATS1CPW, |
| mr_new[177] = mr_old[107] # V2PCWUR -> ATS1CUR, |
| mr_new[178] = mr_old[108] # V2PCWUW -> ATS1CUW, |
| mr_new[179] = mr_old[109] # V2POWPR -> ATS12NSOPR, |
| mr_new[180] = mr_old[110] # V2POWPW -> ATS12NSOPW, |
| mr_new[181] = mr_old[111] # V2POWUR -> ATS12NSOUR, |
| mr_new[182] = mr_old[112] # V2POWUW -> ATS12NWOUW, |
| mr_new[90] = mr_old[113] # ID_MMFR0, |
| mr_new[92] = mr_old[114] # ID_MMFR2, |
| mr_new[93] = mr_old[115] # ID_MMFR3, |
| mr_new[112] = mr_old[116] # v7 ACTLR -> aarch32 ACTLR_NS |
| mr_new[222] = mr_old[117] # PMCR, |
| mr_new[230] = mr_old[118] # PMCCNTR, |
| mr_new[223] = mr_old[119] # PMCNTENSET, |
| mr_new[224] = mr_old[120] # PMCNTENCLR, |
| mr_new[225] = mr_old[121] # PMOVSR, |
| mr_new[226] = mr_old[122] # PMSWINC, |
| mr_new[227] = mr_old[123] # PMSELR, |
| mr_new[228] = mr_old[124] # PMCEID0, |
| mr_new[229] = mr_old[125] # PMCEID1, |
| mr_new[231] = mr_old[126] # PMXEVTYPER, |
| mr_new[233] = mr_old[127] # PMXEVCNTR, |
| mr_new[234] = mr_old[128] # PMUSERENR, |
| mr_new[235] = mr_old[129] # PMINTENSET, |
| mr_new[236] = mr_old[130] # PMINTENCLR, |
| mr_new[94] = mr_old[131] # ID_ISAR0, |
| mr_new[95] = mr_old[132] # ID_ISAR1, |
| mr_new[96] = mr_old[133] # ID_ISAR2, |
| mr_new[97] = mr_old[134] # ID_ISAR3, |
| mr_new[98] = mr_old[135] # ID_ISAR4, |
| mr_new[99] = mr_old[136] # ID_ISAR5, |
| mr_new[20] = mr_old[137] # LOCKFLAG, |
| mr_new[19] = mr_old[138] # LOCKADDR, |
| mr_new[87] = mr_old[139] # ID_PFR1, |
| # Set up the processor features register |
| pfr = int(mr_new[87]) |
| pfr = pfr | 0x1011 |
| mr_new[87] = str(pfr) |
| ### |
| mr_new[238] = mr_old[140] # L2CTLR, |
| mr_new[82] = mr_old[141] # TCMTR |
| mr_new[88] = mr_old[142] # ID_DFR0, |
| mr_new[89] = mr_old[143] # ID_AFR0, |
| mr_new[91] = mr_old[144] # ID_MMFR1, |
| mr_new[102] = mr_old[145] # AIDR, |
| mr_new[146] = mr_old[146] # v7 ADFSR -> aarch32 ADFSR_NS, |
| mr_new[148] = mr_old[147] # AIFSR, |
| mr_new[173] = mr_old[148] # DCIMVAC, |
| mr_new[174] = mr_old[149] # DCISW, |
| mr_new[184] = mr_old[150] # MCCSW -> DCCSW, |
| mr_new[187] = mr_old[151] # DCCMVAU, |
| mr_new[117] = mr_old[152] # NSACR, |
| mr_new[262] = mr_old[153] # VBAR, |
| mr_new[265] = mr_old[154] # MVBAR, |
| mr_new[267] = mr_old[155] # ISR, |
| mr_new[269] = mr_old[156] # FCEIDR -> FCSEIDR, |
| #mr_new[] = mr_old[157] # L2LATENCY -> UNUSED, |
| #mr_new[] = mr_old[158] # CRN15 -> UNUSED, |
| mr_new[599] = mr_old[159] # NOP |
| mr_new[600] = mr_old[160] # RAZ, |
| |
| # Set the new miscRegs structure |
| cpt.set(sec, 'miscRegs', ' '.join(str(x) for x in mr_new)) |
| |
| cpu_prefix = {} |
| # Add in state for ITB/DTB |
| for sec in cpt.sections(): |
| re_tlb_match = re.match('(^.*?sys.*?\.cpu(\d+)*)\.(dtb|itb)$', sec) |
| if not re_tlb_match: |
| continue |
| |
| cpu_prefix[re_tlb_match.group(1)] = True # Save off prefix to add |
| # Set the non-secure bit (bit 9) to 1 for attributes |
| attr = int(cpt.get(sec, '_attr')) |
| attr = attr | 0x200 |
| cpt.set(sec, '_attr', str(attr)) |
| cpt.set(sec, 'haveLPAE', 'false') |
| cpt.set(sec, 'directToStage2', 'false') |
| cpt.set(sec, 'stage2Req', 'false') |
| cpt.set(sec, 'bootUncacheability', 'true') |
| |
| # Add in extra state for the new TLB Entries |
| for sec in cpt.sections(): |
| re_tlbentry_match = re.match('(^.*?sys.*?\.cpu(\d+)*)\.(dtb|itb).TlbEntry\d+$', sec) |
| if not re_tlbentry_match: |
| continue |
| |
| # Add in the new entries |
| cpt.set(sec, 'longDescFormat', 'false') |
| cpt.set(sec, 'vmid', '0') |
| cpt.set(sec, 'isHyp', 'false') |
| valid = cpt.get(sec, 'valid') |
| if valid == 'true': |
| cpt.set(sec, 'ns', 'true') |
| cpt.set(sec, 'nstid', 'true') |
| cpt.set(sec, 'pxn', 'true') |
| cpt.set(sec, 'hap', '3') |
| # All v7 code used 2 level page tables |
| cpt.set(sec, 'lookupLevel', '2') |
| attr = int(cpt.get(sec, 'attributes')) |
| # set the non-secure bit (bit 9) to 1 |
| # as no previous v7 code used secure code |
| attr = attr | 0x200 |
| cpt.set(sec, 'attributes', str(attr)) |
| else: |
| cpt.set(sec, 'ns', 'false') |
| cpt.set(sec, 'nstid', 'false') |
| cpt.set(sec, 'pxn', 'false') |
| cpt.set(sec, 'hap', '0') |
| cpt.set(sec, 'lookupLevel', '0') |
| cpt.set(sec, 'outerShareable', 'false') |
| |
| # Add d/istage2_mmu and d/istage2_mmu.stage2_tlb |
| for key in cpu_prefix: |
| for suffix in ['.istage2_mmu', '.dstage2_mmu']: |
| new_sec = key + suffix |
| cpt.add_section(new_sec) |
| new_sec = key + suffix + ".stage2_tlb" |
| cpt.add_section(new_sec) |
| # Fill in tlb info with some defaults |
| cpt.set(new_sec, '_attr', '0') |
| cpt.set(new_sec, 'haveLPAE', 'false') |
| cpt.set(new_sec, 'directToStage2', 'false') |
| cpt.set(new_sec, 'stage2Req', 'false') |
| cpt.set(new_sec, 'bootUncacheability', 'false') |
| cpt.set(new_sec, 'num_entries', '0') |
| |
| # Version 10 adds block_size_bytes to system.ruby |
| def from_9(cpt): |
| for sec in cpt.sections(): |
| if sec == 'system.ruby': |
| # Use Gem5's default of 64; this should be changed if the to be |
| # upgraded checkpoints were not taken with block-size 64! |
| cpt.set(sec, 'block_size_bytes', '64') |
| |
| migrations = [] |
| migrations.append(from_0) |
| migrations.append(from_1) |
| migrations.append(from_2) |
| migrations.append(from_3) |
| migrations.append(from_4) |
| migrations.append(from_5) |
| migrations.append(from_6) |
| migrations.append(from_7) |
| migrations.append(from_8) |
| migrations.append(from_9) |
| |
| verbose_print = False |
| |
| def verboseprint(*args): |
| if not verbose_print: |
| return |
| for arg in args: |
| print arg, |
| print |
| |
| def process_file(path, **kwargs): |
| if not osp.isfile(path): |
| import errno |
| raise IOError(ennro.ENOENT, "No such file", path) |
| |
| verboseprint("Processing file %s...." % path) |
| |
| if kwargs.get('backup', True): |
| import shutil |
| shutil.copyfile(path, path + '.bak') |
| |
| cpt = ConfigParser.SafeConfigParser() |
| |
| # gem5 is case sensitive with paramaters |
| cpt.optionxform = str |
| |
| # Read the current data |
| cpt_file = file(path, 'r') |
| cpt.readfp(cpt_file) |
| cpt_file.close() |
| |
| # Make sure we know what we're starting from |
| if not cpt.has_option('root','cpt_ver'): |
| raise LookupError("cannot determine version of checkpoint") |
| |
| cpt_ver = cpt.getint('root','cpt_ver') |
| |
| # If the current checkpoint is longer than the migrations list, we have a problem |
| # and someone didn't update this file |
| if cpt_ver > len(migrations): |
| raise ValueError("upgrade script is too old and needs updating") |
| |
| verboseprint("\t...file is at version %#x" % cpt_ver) |
| |
| if cpt_ver == len(migrations): |
| verboseprint("\t...nothing to do") |
| return |
| |
| # Walk through every function from now until the end fixing the checkpoint |
| for v in xrange(cpt_ver,len(migrations)): |
| verboseprint("\t...migrating to version %#x" % (v + 1)) |
| migrations[v](cpt) |
| cpt.set('root','cpt_ver', str(v + 1)) |
| |
| # Write the old data back |
| verboseprint("\t...completed") |
| cpt.write(file(path, 'w')) |
| |
| if __name__ == '__main__': |
| from optparse import OptionParser |
| parser = OptionParser("usage: %prog [options] <filename or directory>") |
| parser.add_option("-r", "--recurse", action="store_true", |
| help="Recurse through all subdirectories modifying "\ |
| "each checkpoint that is found") |
| parser.add_option("-N", "--no-backup", action="store_false", |
| dest="backup", default=True, |
| help="Do no backup each checkpoint before modifying it") |
| parser.add_option("-v", "--verbose", action="store_true", |
| help="Print out debugging information as") |
| |
| (options, args) = parser.parse_args() |
| if len(args) != 1: |
| parser.error("You must specify a checkpoint file to modify or a "\ |
| "directory of checkpoints to recursively update") |
| |
| verbose_print = options.verbose |
| |
| # Deal with shell variables and ~ |
| path = osp.expandvars(osp.expanduser(args[0])) |
| |
| # Process a single file if we have it |
| if osp.isfile(path): |
| process_file(path, **vars(options)) |
| # Process an entire directory |
| elif osp.isdir(path): |
| cpt_file = osp.join(path, 'm5.cpt') |
| if options.recurse: |
| # Visit very file and see if it matches |
| for root,dirs,files in os.walk(path): |
| for name in files: |
| if name == 'm5.cpt': |
| process_file(osp.join(root,name), **vars(options)) |
| for dir in dirs: |
| pass |
| # Maybe someone passed a cpt.XXXXXXX directory and not m5.cpt |
| elif osp.isfile(cpt_file): |
| process_file(cpt_file, **vars(options)) |
| else: |
| print "Error: checkpoint file not found at in %s " % path, |
| print "and recurse not specified" |
| sys.exit(1) |
| sys.exit(0) |
| |
