| // Copyright (c) 2007-2008 The Hewlett-Packard Development Company |
| // All rights reserved. |
| // |
| // The license below extends only to copyright in the software and shall |
| // not be construed as granting a license to any other intellectual |
| // property including but not limited to intellectual property relating |
| // to a hardware implementation of the functionality of the software |
| // licensed hereunder. You may use the software subject to the license |
| // terms below provided that you ensure that this notice is replicated |
| // unmodified and in its entirety in all distributions of the software, |
| // modified or unmodified, in source code or in binary form. |
| // |
| // Redistribution and use in source and binary forms, with or without |
| // modification, are permitted provided that the following conditions are |
| // met: redistributions of source code must retain the above copyright |
| // notice, this list of conditions and the following disclaimer; |
| // redistributions in binary form must reproduce the above copyright |
| // notice, this list of conditions and the following disclaimer in the |
| // documentation and/or other materials provided with the distribution; |
| // neither the name of the copyright holders nor the names of its |
| // contributors may be used to endorse or promote products derived from |
| // this software without specific prior written permission. |
| // |
| // THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS |
| // "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT |
| // LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR |
| // A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT |
| // OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, |
| // SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT |
| // LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, |
| // DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY |
| // THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT |
| // (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE |
| // OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. |
| // |
| // Authors: Gabe Black |
| |
| ////////////////////////////////////////////////////////////////////////// |
| // |
| // RegOp Microop templates |
| // |
| ////////////////////////////////////////////////////////////////////////// |
| |
| def template MicroRegOpExecute {{ |
| Fault %(class_name)s::execute(ExecContext *xc, |
| Trace::InstRecord *traceData) const |
| { |
| Fault fault = NoFault; |
| |
| DPRINTF(X86, "The data size is %d\n", dataSize); |
| %(op_decl)s; |
| %(op_rd)s; |
| |
| IntReg result M5_VAR_USED; |
| |
| if(%(cond_check)s) |
| { |
| %(code)s; |
| %(flag_code)s; |
| } |
| else |
| { |
| %(else_code)s; |
| } |
| |
| //Write the resulting state to the execution context |
| if(fault == NoFault) |
| { |
| %(op_wb)s; |
| } |
| return fault; |
| } |
| }}; |
| |
| def template MicroRegOpImmExecute {{ |
| Fault %(class_name)s::execute(ExecContext *xc, |
| Trace::InstRecord *traceData) const |
| { |
| Fault fault = NoFault; |
| |
| %(op_decl)s; |
| %(op_rd)s; |
| |
| IntReg result M5_VAR_USED; |
| |
| if(%(cond_check)s) |
| { |
| %(code)s; |
| %(flag_code)s; |
| } |
| else |
| { |
| %(else_code)s; |
| } |
| |
| //Write the resulting state to the execution context |
| if(fault == NoFault) |
| { |
| %(op_wb)s; |
| } |
| return fault; |
| } |
| }}; |
| |
| def template MicroRegOpDeclare {{ |
| class %(class_name)s : public %(base_class)s |
| { |
| public: |
| %(class_name)s(ExtMachInst _machInst, |
| const char * instMnem, uint64_t setFlags, |
| InstRegIndex _src1, InstRegIndex _src2, InstRegIndex _dest, |
| uint8_t _dataSize, uint16_t _ext); |
| |
| Fault execute(ExecContext *, Trace::InstRecord *) const; |
| }; |
| }}; |
| |
| def template MicroRegOpImmDeclare {{ |
| |
| class %(class_name)s : public %(base_class)s |
| { |
| public: |
| %(class_name)s(ExtMachInst _machInst, |
| const char * instMnem, uint64_t setFlags, |
| InstRegIndex _src1, uint8_t _imm8, InstRegIndex _dest, |
| uint8_t _dataSize, uint16_t _ext); |
| |
| Fault execute(ExecContext *, Trace::InstRecord *) const; |
| }; |
| }}; |
| |
| def template MicroRegOpConstructor {{ |
| %(class_name)s::%(class_name)s( |
| ExtMachInst machInst, const char * instMnem, uint64_t setFlags, |
| InstRegIndex _src1, InstRegIndex _src2, InstRegIndex _dest, |
| uint8_t _dataSize, uint16_t _ext) : |
| %(base_class)s(machInst, "%(mnemonic)s", instMnem, setFlags, |
| _src1, _src2, _dest, _dataSize, _ext, |
| %(op_class)s) |
| { |
| %(constructor)s; |
| %(cond_control_flag_init)s; |
| } |
| }}; |
| |
| def template MicroRegOpImmConstructor {{ |
| %(class_name)s::%(class_name)s( |
| ExtMachInst machInst, const char * instMnem, uint64_t setFlags, |
| InstRegIndex _src1, uint8_t _imm8, InstRegIndex _dest, |
| uint8_t _dataSize, uint16_t _ext) : |
| %(base_class)s(machInst, "%(mnemonic)s", instMnem, setFlags, |
| _src1, _imm8, _dest, _dataSize, _ext, |
| %(op_class)s) |
| { |
| %(constructor)s; |
| %(cond_control_flag_init)s; |
| } |
| }}; |
| |
| output header {{ |
| void |
| divide(uint64_t dividend, uint64_t divisor, |
| uint64_t "ient, uint64_t &remainder); |
| |
| enum SegmentSelectorCheck { |
| SegNoCheck, SegCSCheck, SegCallGateCheck, SegIntGateCheck, |
| SegSoftIntGateCheck, SegSSCheck, SegIretCheck, SegIntCSCheck, |
| SegTRCheck, SegTSSCheck, SegInGDTCheck, SegLDTCheck |
| }; |
| |
| enum LongModeDescriptorType { |
| LDT64 = 2, |
| AvailableTSS64 = 9, |
| BusyTSS64 = 0xb, |
| CallGate64 = 0xc, |
| IntGate64 = 0xe, |
| TrapGate64 = 0xf |
| }; |
| }}; |
| |
| output decoder {{ |
| void |
| divide(uint64_t dividend, uint64_t divisor, |
| uint64_t "ient, uint64_t &remainder) |
| { |
| //Check for divide by zero. |
| assert(divisor != 0); |
| //If the divisor is bigger than the dividend, don't do anything. |
| if (divisor <= dividend) { |
| //Shift the divisor so it's msb lines up with the dividend. |
| int dividendMsb = findMsbSet(dividend); |
| int divisorMsb = findMsbSet(divisor); |
| int shift = dividendMsb - divisorMsb; |
| divisor <<= shift; |
| //Compute what we'll add to the quotient if the divisor isn't |
| //now larger than the dividend. |
| uint64_t quotientBit = 1; |
| quotientBit <<= shift; |
| //If we need to step back a bit (no pun intended) because the |
| //divisor got too to large, do that here. This is the "or two" |
| //part of one or two bit division. |
| if (divisor > dividend) { |
| quotientBit >>= 1; |
| divisor >>= 1; |
| } |
| //Decrement the remainder and increment the quotient. |
| quotient += quotientBit; |
| remainder -= divisor; |
| } |
| } |
| }}; |
| |
| let {{ |
| # Make these empty strings so that concatenating onto |
| # them will always work. |
| header_output = "" |
| decoder_output = "" |
| exec_output = "" |
| |
| immTemplates = ( |
| MicroRegOpImmDeclare, |
| MicroRegOpImmConstructor, |
| MicroRegOpImmExecute) |
| |
| regTemplates = ( |
| MicroRegOpDeclare, |
| MicroRegOpConstructor, |
| MicroRegOpExecute) |
| |
| class RegOpMeta(type): |
| def buildCppClasses(self, name, Name, suffix, code, big_code, \ |
| flag_code, cond_check, else_code, cond_control_flag_init, |
| op_class): |
| |
| # Globals to stick the output in |
| global header_output |
| global decoder_output |
| global exec_output |
| |
| # Stick all the code together so it can be searched at once |
| allCode = "|".join((code, flag_code, cond_check, else_code, |
| cond_control_flag_init)) |
| allBigCode = "|".join((big_code, flag_code, cond_check, else_code, |
| cond_control_flag_init)) |
| |
| # If op2 is used anywhere, make register and immediate versions |
| # of this code. |
| matcher = re.compile(r"(?<!\w)(?P<prefix>s?)op2(?P<typeQual>_[^\W_]+)?") |
| match = matcher.search(allCode + allBigCode) |
| if match: |
| typeQual = "" |
| if match.group("typeQual"): |
| typeQual = match.group("typeQual") |
| src2_name = "%spsrc2%s" % (match.group("prefix"), typeQual) |
| self.buildCppClasses(name, Name, suffix, |
| matcher.sub(src2_name, code), |
| matcher.sub(src2_name, big_code), |
| matcher.sub(src2_name, flag_code), |
| matcher.sub(src2_name, cond_check), |
| matcher.sub(src2_name, else_code), |
| matcher.sub(src2_name, cond_control_flag_init), |
| op_class) |
| imm_name = "%simm8" % match.group("prefix") |
| self.buildCppClasses(name + "i", Name, suffix + "Imm", |
| matcher.sub(imm_name, code), |
| matcher.sub(imm_name, big_code), |
| matcher.sub(imm_name, flag_code), |
| matcher.sub(imm_name, cond_check), |
| matcher.sub(imm_name, else_code), |
| matcher.sub(imm_name, cond_control_flag_init), |
| op_class) |
| return |
| |
| # If there's something optional to do with flags, generate |
| # a version without it and fix up this version to use it. |
| if flag_code != "" or cond_check != "true": |
| self.buildCppClasses(name, Name, suffix, |
| code, big_code, "", "true", else_code, "", op_class) |
| suffix = "Flags" + suffix |
| |
| # If psrc1 or psrc2 is used, we need to actually insert code to |
| # compute it. |
| for (big, all) in ((False, allCode), (True, allBigCode)): |
| prefix = "" |
| for (rex, decl) in ( |
| ("(?<!\w)psrc1(?!\w)", |
| "uint64_t psrc1 = pick(SrcReg1, 0, dataSize);"), |
| ("(?<!\w)psrc2(?!\w)", |
| "uint64_t psrc2 = pick(SrcReg2, 1, dataSize);"), |
| ("(?<!\w)spsrc1(?!\w)", |
| "int64_t spsrc1 = signedPick(SrcReg1, 0, dataSize);"), |
| ("(?<!\w)spsrc2(?!\w)", |
| "int64_t spsrc2 = signedPick(SrcReg2, 1, dataSize);"), |
| ("(?<!\w)simm8(?!\w)", |
| "int8_t simm8 = imm8;")): |
| matcher = re.compile(rex) |
| if matcher.search(all): |
| prefix += decl + "\n" |
| if big: |
| if big_code != "": |
| big_code = prefix + big_code |
| else: |
| code = prefix + code |
| |
| base = "X86ISA::RegOp" |
| |
| # If imm8 shows up in the code, use the immediate templates, if |
| # not, hopefully the register ones will be correct. |
| templates = regTemplates |
| matcher = re.compile("(?<!\w)s?imm8(?!\w)") |
| if matcher.search(allCode): |
| base += "Imm" |
| templates = immTemplates |
| |
| # Get everything ready for the substitution |
| iops = [InstObjParams(name, Name + suffix, base, |
| {"code" : code, |
| "flag_code" : flag_code, |
| "cond_check" : cond_check, |
| "else_code" : else_code, |
| "cond_control_flag_init" : cond_control_flag_init, |
| "op_class" : op_class})] |
| if big_code != "": |
| iops += [InstObjParams(name, Name + suffix + "Big", base, |
| {"code" : big_code, |
| "flag_code" : flag_code, |
| "cond_check" : cond_check, |
| "else_code" : else_code, |
| "cond_control_flag_init" : cond_control_flag_init, |
| "op_class" : op_class})] |
| |
| # Generate the actual code (finally!) |
| for iop in iops: |
| header_output += templates[0].subst(iop) |
| decoder_output += templates[1].subst(iop) |
| exec_output += templates[2].subst(iop) |
| |
| |
| def __new__(mcls, Name, bases, dict): |
| abstract = False |
| name = Name.lower() |
| if "abstract" in dict: |
| abstract = dict['abstract'] |
| del dict['abstract'] |
| |
| cls = super(RegOpMeta, mcls).__new__(mcls, Name, bases, dict) |
| if not abstract: |
| cls.className = Name |
| cls.base_mnemonic = name |
| code = cls.code |
| big_code = cls.big_code |
| flag_code = cls.flag_code |
| cond_check = cls.cond_check |
| else_code = cls.else_code |
| cond_control_flag_init = cls.cond_control_flag_init |
| op_class = cls.op_class |
| |
| # Set up the C++ classes |
| mcls.buildCppClasses(cls, name, Name, "", code, big_code, |
| flag_code, cond_check, else_code, |
| cond_control_flag_init, op_class) |
| |
| # Hook into the microassembler dict |
| global microopClasses |
| microopClasses[name] = cls |
| |
| allCode = "|".join((code, flag_code, cond_check, else_code, |
| cond_control_flag_init)) |
| |
| # If op2 is used anywhere, make register and immediate versions |
| # of this code. |
| matcher = re.compile(r"op2(?P<typeQual>_[^\W_]+)?") |
| if matcher.search(allCode): |
| microopClasses[name + 'i'] = cls |
| return cls |
| |
| |
| class RegOp(X86Microop): |
| __metaclass__ = RegOpMeta |
| # This class itself doesn't act as a microop |
| abstract = True |
| |
| # Default template parameter values |
| big_code = "" |
| flag_code = "" |
| cond_check = "true" |
| else_code = ";" |
| cond_control_flag_init = "" |
| op_class = "IntAluOp" |
| |
| def __init__(self, dest, src1, op2, flags = None, dataSize = "env.dataSize"): |
| self.dest = dest |
| self.src1 = src1 |
| self.op2 = op2 |
| self.flags = flags |
| self.dataSize = dataSize |
| if flags is None: |
| self.ext = 0 |
| else: |
| if not isinstance(flags, (list, tuple)): |
| raise Exception, "flags must be a list or tuple of flags" |
| self.ext = " | ".join(flags) |
| self.className += "Flags" |
| |
| def getAllocator(self, microFlags): |
| if self.big_code != "": |
| className = self.className |
| if self.mnemonic == self.base_mnemonic + 'i': |
| className += "Imm" |
| allocString = ''' |
| (%(dataSize)s >= 4) ? |
| (StaticInstPtr)(new %(class_name)sBig(machInst, |
| macrocodeBlock, %(flags)s, %(src1)s, %(op2)s, |
| %(dest)s, %(dataSize)s, %(ext)s)) : |
| (StaticInstPtr)(new %(class_name)s(machInst, |
| macrocodeBlock, %(flags)s, %(src1)s, %(op2)s, |
| %(dest)s, %(dataSize)s, %(ext)s)) |
| ''' |
| allocator = allocString % { |
| "class_name" : className, |
| "flags" : self.microFlagsText(microFlags), |
| "src1" : self.src1, "op2" : self.op2, |
| "dest" : self.dest, |
| "dataSize" : self.dataSize, |
| "ext" : self.ext} |
| return allocator |
| else: |
| className = self.className |
| if self.mnemonic == self.base_mnemonic + 'i': |
| className += "Imm" |
| allocator = '''new %(class_name)s(machInst, macrocodeBlock, |
| %(flags)s, %(src1)s, %(op2)s, %(dest)s, |
| %(dataSize)s, %(ext)s)''' % { |
| "class_name" : className, |
| "flags" : self.microFlagsText(microFlags), |
| "src1" : self.src1, "op2" : self.op2, |
| "dest" : self.dest, |
| "dataSize" : self.dataSize, |
| "ext" : self.ext} |
| return allocator |
| |
| class LogicRegOp(RegOp): |
| abstract = True |
| flag_code = ''' |
| //Don't have genFlags handle the OF or CF bits |
| uint64_t mask = CFBit | ECFBit | OFBit; |
| uint64_t newFlags = genFlags(PredccFlagBits | PreddfBit | |
| PredezfBit, ext & ~mask, result, psrc1, op2); |
| PredezfBit = newFlags & EZFBit; |
| PreddfBit = newFlags & DFBit; |
| PredccFlagBits = newFlags & ccFlagMask; |
| |
| //If a logic microop wants to set these, it wants to set them to 0. |
| PredcfofBits = PredcfofBits & ~((CFBit | OFBit) & ext); |
| PredecfBit = PredecfBit & ~(ECFBit & ext); |
| ''' |
| |
| class FlagRegOp(RegOp): |
| abstract = True |
| flag_code = ''' |
| uint64_t newFlags = genFlags(PredccFlagBits | PredcfofBits | |
| PreddfBit | PredecfBit | PredezfBit, |
| ext, result, psrc1, op2); |
| |
| PredcfofBits = newFlags & cfofMask; |
| PredecfBit = newFlags & ECFBit; |
| PredezfBit = newFlags & EZFBit; |
| PreddfBit = newFlags & DFBit; |
| PredccFlagBits = newFlags & ccFlagMask; |
| ''' |
| |
| class SubRegOp(RegOp): |
| abstract = True |
| flag_code = ''' |
| uint64_t newFlags = genFlags(PredccFlagBits | PredcfofBits | |
| PreddfBit | PredecfBit | PredezfBit, |
| ext, result, psrc1, ~op2, true); |
| |
| PredcfofBits = newFlags & cfofMask; |
| PredecfBit = newFlags & ECFBit; |
| PredezfBit = newFlags & EZFBit; |
| PreddfBit = newFlags & DFBit; |
| PredccFlagBits = newFlags & ccFlagMask; |
| ''' |
| |
| class CondRegOp(RegOp): |
| abstract = True |
| cond_check = "checkCondition(ccFlagBits | cfofBits | dfBit | ecfBit | \ |
| ezfBit, ext)" |
| cond_control_flag_init = "flags[IsCondControl] = flags[IsControl];" |
| |
| class RdRegOp(RegOp): |
| abstract = True |
| def __init__(self, dest, src1=None, dataSize="env.dataSize"): |
| if not src1: |
| src1 = dest |
| super(RdRegOp, self).__init__(dest, src1, \ |
| "InstRegIndex(NUM_INTREGS)", None, dataSize) |
| |
| class WrRegOp(RegOp): |
| abstract = True |
| def __init__(self, src1, src2, flags=None, dataSize="env.dataSize"): |
| super(WrRegOp, self).__init__("InstRegIndex(NUM_INTREGS)", \ |
| src1, src2, flags, dataSize) |
| |
| class Add(FlagRegOp): |
| code = 'DestReg = merge(DestReg, result = (psrc1 + op2), dataSize);' |
| big_code = 'DestReg = result = (psrc1 + op2) & mask(dataSize * 8);' |
| |
| class Or(LogicRegOp): |
| code = 'DestReg = merge(DestReg, result = (psrc1 | op2), dataSize);' |
| big_code = 'DestReg = result = (psrc1 | op2) & mask(dataSize * 8);' |
| |
| class Adc(FlagRegOp): |
| code = ''' |
| CCFlagBits flags = cfofBits; |
| DestReg = merge(DestReg, result = (psrc1 + op2 + flags.cf), dataSize); |
| ''' |
| big_code = ''' |
| CCFlagBits flags = cfofBits; |
| DestReg = result = (psrc1 + op2 + flags.cf) & mask(dataSize * 8); |
| ''' |
| |
| class Sbb(SubRegOp): |
| code = ''' |
| CCFlagBits flags = cfofBits; |
| DestReg = merge(DestReg, result = (psrc1 - op2 - flags.cf), dataSize); |
| ''' |
| big_code = ''' |
| CCFlagBits flags = cfofBits; |
| DestReg = result = (psrc1 - op2 - flags.cf) & mask(dataSize * 8); |
| ''' |
| |
| class And(LogicRegOp): |
| code = 'DestReg = merge(DestReg, result = (psrc1 & op2), dataSize)' |
| big_code = 'DestReg = result = (psrc1 & op2) & mask(dataSize * 8)' |
| |
| class Sub(SubRegOp): |
| code = 'DestReg = merge(DestReg, result = (psrc1 - op2), dataSize)' |
| big_code = 'DestReg = result = (psrc1 - op2) & mask(dataSize * 8)' |
| |
| class Xor(LogicRegOp): |
| code = 'DestReg = merge(DestReg, result = (psrc1 ^ op2), dataSize)' |
| big_code = 'DestReg = result = (psrc1 ^ op2) & mask(dataSize * 8)' |
| |
| class Mul1s(WrRegOp): |
| op_class = 'IntMultOp' |
| |
| # Multiply two values Aa and Bb where Aa = A << p + a, then correct for |
| # negative operands. |
| # Aa * Bb |
| # = (A << p + a) * (B << p + b) |
| # = (A * B) << 2p + (A * b + a * B) << p + a * b |
| code = ''' |
| ProdLow = psrc1 * op2; |
| |
| int p = (dataSize * 8) / 2; |
| uint64_t A = bits(psrc1, 2 * p - 1, p); |
| uint64_t a = bits(psrc1, p - 1, 0); |
| uint64_t B = bits<uint64_t>(op2, 2 * p - 1, p); |
| uint64_t b = bits<uint64_t>(op2, p - 1, 0); |
| |
| uint64_t c1, c2; // Carry between place values. |
| uint64_t ab = a * b, Ab = A * b, aB = a * B, AB = A * B; |
| |
| c1 = ab >> p; |
| |
| // Be careful to avoid overflow if p is large. |
| if (p == 32) { |
| c2 = (c1 >> 1) + (Ab >> 1) + (aB >> 1); |
| c2 += ((c1 & 0x1) + (Ab & 0x1) + (aB & 0x1)) >> 1; |
| c2 >>= (p - 1); |
| } else { |
| c2 = (c1 + Ab + aB) >> p; |
| } |
| |
| uint64_t hi = AB + c2; |
| |
| if (bits(psrc1, dataSize * 8 - 1)) |
| hi -= op2; |
| if (bits(op2, dataSize * 8 - 1)) |
| hi -= psrc1; |
| |
| ProdHi = hi; |
| ''' |
| flag_code = ''' |
| if ((-ProdHi & mask(dataSize * 8)) != |
| bits(ProdLow, dataSize * 8 - 1)) { |
| PredcfofBits = PredcfofBits | (ext & (CFBit | OFBit)); |
| PredecfBit = PredecfBit | (ext & ECFBit); |
| } else { |
| PredcfofBits = PredcfofBits & ~(ext & (CFBit | OFBit)); |
| PredecfBit = PredecfBit & ~(ext & ECFBit); |
| } |
| ''' |
| |
| class Mul1u(WrRegOp): |
| op_class = 'IntMultOp' |
| |
| # Multiply two values Aa and Bb where Aa = A << p + a. |
| # Aa * Bb |
| # = (A << p + a) * (B << p + b) |
| # = (A * B) << 2p + (A * b + a * B) << p + a * b |
| code = ''' |
| ProdLow = psrc1 * op2; |
| |
| int p = (dataSize * 8) / 2; |
| uint64_t A = bits(psrc1, 2 * p - 1, p); |
| uint64_t a = bits(psrc1, p - 1, 0); |
| uint64_t B = bits<uint64_t>(op2, 2 * p - 1, p); |
| uint64_t b = bits<uint64_t>(op2, p - 1, 0); |
| |
| uint64_t c1, c2; // Carry between place values. |
| uint64_t ab = a * b, Ab = A * b, aB = a * B, AB = A * B; |
| |
| c1 = ab >> p; |
| |
| // Be careful to avoid overflow if p is large. |
| if (p == 32) { |
| c2 = (c1 >> 1) + (Ab >> 1) + (aB >> 1); |
| c2 += ((c1 & 0x1) + (Ab & 0x1) + (aB & 0x1)) >> 1; |
| c2 >>= (p - 1); |
| } else { |
| c2 = (c1 + Ab + aB) >> p; |
| } |
| |
| ProdHi = AB + c2; |
| ''' |
| flag_code = ''' |
| if (ProdHi) { |
| PredcfofBits = PredcfofBits | (ext & (CFBit | OFBit)); |
| PredecfBit = PredecfBit | (ext & ECFBit); |
| } else { |
| PredcfofBits = PredcfofBits & ~(ext & (CFBit | OFBit)); |
| PredecfBit = PredecfBit & ~(ext & ECFBit); |
| } |
| ''' |
| |
| class Mulel(RdRegOp): |
| code = 'DestReg = merge(SrcReg1, ProdLow, dataSize);' |
| big_code = 'DestReg = ProdLow & mask(dataSize * 8);' |
| |
| class Muleh(RdRegOp): |
| def __init__(self, dest, src1=None, flags=None, dataSize="env.dataSize"): |
| if not src1: |
| src1 = dest |
| super(RdRegOp, self).__init__(dest, src1, \ |
| "InstRegIndex(NUM_INTREGS)", flags, dataSize) |
| code = 'DestReg = merge(SrcReg1, ProdHi, dataSize);' |
| big_code = 'DestReg = ProdHi & mask(dataSize * 8);' |
| |
| # One or two bit divide |
| class Div1(WrRegOp): |
| op_class = 'IntDivOp' |
| |
| code = ''' |
| //These are temporaries so that modifying them later won't make |
| //the ISA parser think they're also sources. |
| uint64_t quotient = 0; |
| uint64_t remainder = psrc1; |
| //Similarly, this is a temporary so changing it doesn't make it |
| //a source. |
| uint64_t divisor = op2; |
| //This is a temporary just for consistency and clarity. |
| uint64_t dividend = remainder; |
| //Do the division. |
| if (divisor == 0) { |
| fault = std::make_shared<DivideError>(); |
| } else { |
| divide(dividend, divisor, quotient, remainder); |
| //Record the final results. |
| Remainder = remainder; |
| Quotient = quotient; |
| Divisor = divisor; |
| } |
| ''' |
| |
| # Step divide |
| class Div2(RegOp): |
| op_class = 'IntDivOp' |
| |
| divCode = ''' |
| uint64_t dividend = Remainder; |
| uint64_t divisor = Divisor; |
| uint64_t quotient = Quotient; |
| uint64_t remainder = dividend; |
| int remaining = op2; |
| //If we overshot, do nothing. This lets us unrool division loops a |
| //little. |
| if (divisor == 0) { |
| fault = std::make_shared<DivideError>(); |
| } else if (remaining) { |
| if (divisor & (ULL(1) << 63)) { |
| while (remaining && !(dividend & (ULL(1) << 63))) { |
| dividend = (dividend << 1) | |
| bits(SrcReg1, remaining - 1); |
| quotient <<= 1; |
| remaining--; |
| } |
| if (dividend & (ULL(1) << 63)) { |
| bool highBit = false; |
| if (dividend < divisor && remaining) { |
| highBit = true; |
| dividend = (dividend << 1) | |
| bits(SrcReg1, remaining - 1); |
| quotient <<= 1; |
| remaining--; |
| } |
| if (highBit || divisor <= dividend) { |
| quotient++; |
| dividend -= divisor; |
| } |
| } |
| remainder = dividend; |
| } else { |
| //Shift in bits from the low order portion of the dividend |
| while (dividend < divisor && remaining) { |
| dividend = (dividend << 1) | |
| bits(SrcReg1, remaining - 1); |
| quotient <<= 1; |
| remaining--; |
| } |
| remainder = dividend; |
| //Do the division. |
| divide(dividend, divisor, quotient, remainder); |
| } |
| } |
| //Keep track of how many bits there are still to pull in. |
| %s |
| //Record the final results |
| Remainder = remainder; |
| Quotient = quotient; |
| ''' |
| code = divCode % "DestReg = merge(DestReg, remaining, dataSize);" |
| big_code = divCode % "DestReg = remaining & mask(dataSize * 8);" |
| flag_code = ''' |
| if (remaining == 0) |
| PredezfBit = PredezfBit | (ext & EZFBit); |
| else |
| PredezfBit = PredezfBit & ~(ext & EZFBit); |
| ''' |
| |
| class Divq(RdRegOp): |
| code = 'DestReg = merge(SrcReg1, Quotient, dataSize);' |
| big_code = 'DestReg = Quotient & mask(dataSize * 8);' |
| |
| class Divr(RdRegOp): |
| code = 'DestReg = merge(SrcReg1, Remainder, dataSize);' |
| big_code = 'DestReg = Remainder & mask(dataSize * 8);' |
| |
| class Mov(CondRegOp): |
| code = 'DestReg = merge(SrcReg1, op2, dataSize)' |
| else_code = 'DestReg = DestReg;' |
| |
| # Shift instructions |
| |
| class Sll(RegOp): |
| code = ''' |
| uint8_t shiftAmt = (op2 & ((dataSize == 8) ? mask(6) : mask(5))); |
| DestReg = merge(DestReg, psrc1 << shiftAmt, dataSize); |
| ''' |
| big_code = ''' |
| uint8_t shiftAmt = (op2 & ((dataSize == 8) ? mask(6) : mask(5))); |
| DestReg = (psrc1 << shiftAmt) & mask(dataSize * 8); |
| ''' |
| flag_code = ''' |
| // If the shift amount is zero, no flags should be modified. |
| if (shiftAmt) { |
| //Zero out any flags we might modify. This way we only have to |
| //worry about setting them. |
| PredcfofBits = PredcfofBits & ~(ext & (CFBit | OFBit)); |
| PredecfBit = PredecfBit & ~(ext & ECFBit); |
| |
| int CFBits = 0; |
| //Figure out if we -would- set the CF bits if requested. |
| if (shiftAmt <= dataSize * 8 && |
| bits(SrcReg1, dataSize * 8 - shiftAmt)) { |
| CFBits = 1; |
| } |
| |
| //If some combination of the CF bits need to be set, set them. |
| if ((ext & (CFBit | ECFBit)) && CFBits) { |
| PredcfofBits = PredcfofBits | (ext & CFBit); |
| PredecfBit = PredecfBit | (ext & ECFBit); |
| } |
| |
| //Figure out what the OF bit should be. |
| if ((ext & OFBit) && (CFBits ^ bits(DestReg, dataSize * 8 - 1))) |
| PredcfofBits = PredcfofBits | OFBit; |
| |
| //Use the regular mechanisms to calculate the other flags. |
| uint64_t newFlags = genFlags(PredccFlagBits | PreddfBit | |
| PredezfBit, ext & ~(CFBit | ECFBit | OFBit), |
| DestReg, psrc1, op2); |
| |
| PredezfBit = newFlags & EZFBit; |
| PreddfBit = newFlags & DFBit; |
| PredccFlagBits = newFlags & ccFlagMask; |
| } |
| ''' |
| |
| class Srl(RegOp): |
| # Because what happens to the bits shift -in- on a right shift |
| # is not defined in the C/C++ standard, we have to mask them out |
| # to be sure they're zero. |
| code = ''' |
| uint8_t shiftAmt = (op2 & ((dataSize == 8) ? mask(6) : mask(5))); |
| uint64_t logicalMask = mask(dataSize * 8 - shiftAmt); |
| DestReg = merge(DestReg, (psrc1 >> shiftAmt) & logicalMask, dataSize); |
| ''' |
| big_code = ''' |
| uint8_t shiftAmt = (op2 & ((dataSize == 8) ? mask(6) : mask(5))); |
| uint64_t logicalMask = mask(dataSize * 8 - shiftAmt); |
| DestReg = (psrc1 >> shiftAmt) & logicalMask; |
| ''' |
| flag_code = ''' |
| // If the shift amount is zero, no flags should be modified. |
| if (shiftAmt) { |
| //Zero out any flags we might modify. This way we only have to |
| //worry about setting them. |
| PredcfofBits = PredcfofBits & ~(ext & (CFBit | OFBit)); |
| PredecfBit = PredecfBit & ~(ext & ECFBit); |
| |
| //If some combination of the CF bits need to be set, set them. |
| if ((ext & (CFBit | ECFBit)) && |
| shiftAmt <= dataSize * 8 && |
| bits(SrcReg1, shiftAmt - 1)) { |
| PredcfofBits = PredcfofBits | (ext & CFBit); |
| PredecfBit = PredecfBit | (ext & ECFBit); |
| } |
| |
| //Figure out what the OF bit should be. |
| if ((ext & OFBit) && bits(SrcReg1, dataSize * 8 - 1)) |
| PredcfofBits = PredcfofBits | OFBit; |
| |
| //Use the regular mechanisms to calculate the other flags. |
| uint64_t newFlags = genFlags(PredccFlagBits | PreddfBit | |
| PredezfBit, ext & ~(CFBit | ECFBit | OFBit), |
| DestReg, psrc1, op2); |
| |
| PredezfBit = newFlags & EZFBit; |
| PreddfBit = newFlags & DFBit; |
| PredccFlagBits = newFlags & ccFlagMask; |
| } |
| ''' |
| |
| class Sra(RegOp): |
| # Because what happens to the bits shift -in- on a right shift |
| # is not defined in the C/C++ standard, we have to sign extend |
| # them manually to be sure. |
| code = ''' |
| uint8_t shiftAmt = (op2 & ((dataSize == 8) ? mask(6) : mask(5))); |
| uint64_t arithMask = (shiftAmt == 0) ? 0 : |
| -bits(psrc1, dataSize * 8 - 1) << (dataSize * 8 - shiftAmt); |
| DestReg = merge(DestReg, (psrc1 >> shiftAmt) | arithMask, dataSize); |
| ''' |
| big_code = ''' |
| uint8_t shiftAmt = (op2 & ((dataSize == 8) ? mask(6) : mask(5))); |
| uint64_t arithMask = (shiftAmt == 0) ? 0 : |
| -bits(psrc1, dataSize * 8 - 1) << (dataSize * 8 - shiftAmt); |
| DestReg = ((psrc1 >> shiftAmt) | arithMask) & mask(dataSize * 8); |
| ''' |
| flag_code = ''' |
| // If the shift amount is zero, no flags should be modified. |
| if (shiftAmt) { |
| //Zero out any flags we might modify. This way we only have to |
| //worry about setting them. |
| PredcfofBits = PredcfofBits & ~(ext & (CFBit | OFBit)); |
| PredecfBit = PredecfBit & ~(ext & ECFBit); |
| |
| //If some combination of the CF bits need to be set, set them. |
| uint8_t effectiveShift = |
| (shiftAmt <= dataSize * 8) ? shiftAmt : (dataSize * 8); |
| if ((ext & (CFBit | ECFBit)) && |
| bits(SrcReg1, effectiveShift - 1)) { |
| PredcfofBits = PredcfofBits | (ext & CFBit); |
| PredecfBit = PredecfBit | (ext & ECFBit); |
| } |
| |
| //Use the regular mechanisms to calculate the other flags. |
| uint64_t newFlags = genFlags(PredccFlagBits | PreddfBit | |
| PredezfBit, ext & ~(CFBit | ECFBit | OFBit), |
| DestReg, psrc1, op2); |
| |
| PredezfBit = newFlags & EZFBit; |
| PreddfBit = newFlags & DFBit; |
| PredccFlagBits = newFlags & ccFlagMask; |
| } |
| ''' |
| |
| class Ror(RegOp): |
| code = ''' |
| uint8_t shiftAmt = |
| (op2 & ((dataSize == 8) ? mask(6) : mask(5))); |
| uint8_t realShiftAmt = shiftAmt % (dataSize * 8); |
| if (realShiftAmt) { |
| uint64_t top = psrc1 << (dataSize * 8 - realShiftAmt); |
| uint64_t bottom = bits(psrc1, dataSize * 8, realShiftAmt); |
| DestReg = merge(DestReg, top | bottom, dataSize); |
| } else |
| DestReg = merge(DestReg, DestReg, dataSize); |
| ''' |
| flag_code = ''' |
| // If the shift amount is zero, no flags should be modified. |
| if (shiftAmt) { |
| //Zero out any flags we might modify. This way we only have to |
| //worry about setting them. |
| PredcfofBits = PredcfofBits & ~(ext & (CFBit | OFBit)); |
| PredecfBit = PredecfBit & ~(ext & ECFBit); |
| |
| //Find the most and second most significant bits of the result. |
| int msb = bits(DestReg, dataSize * 8 - 1); |
| int smsb = bits(DestReg, dataSize * 8 - 2); |
| //If some combination of the CF bits need to be set, set them. |
| if ((ext & (CFBit | ECFBit)) && msb) { |
| PredcfofBits = PredcfofBits | (ext & CFBit); |
| PredecfBit = PredecfBit | (ext & ECFBit); |
| } |
| |
| //Figure out what the OF bit should be. |
| if ((ext & OFBit) && (msb ^ smsb)) |
| PredcfofBits = PredcfofBits | OFBit; |
| |
| //Use the regular mechanisms to calculate the other flags. |
| uint64_t newFlags = genFlags(PredccFlagBits | PreddfBit | |
| PredezfBit, ext & ~(CFBit | ECFBit | OFBit), |
| DestReg, psrc1, op2); |
| |
| PredezfBit = newFlags & EZFBit; |
| PreddfBit = newFlags & DFBit; |
| PredccFlagBits = newFlags & ccFlagMask; |
| } |
| ''' |
| |
| class Rcr(RegOp): |
| code = ''' |
| uint8_t shiftAmt = |
| (op2 & ((dataSize == 8) ? mask(6) : mask(5))); |
| uint8_t realShiftAmt = shiftAmt % (dataSize * 8 + 1); |
| if (realShiftAmt) { |
| CCFlagBits flags = cfofBits; |
| uint64_t top = flags.cf << (dataSize * 8 - realShiftAmt); |
| if (realShiftAmt > 1) |
| top |= psrc1 << (dataSize * 8 - realShiftAmt + 1); |
| uint64_t bottom = bits(psrc1, dataSize * 8 - 1, realShiftAmt); |
| DestReg = merge(DestReg, top | bottom, dataSize); |
| } else |
| DestReg = merge(DestReg, DestReg, dataSize); |
| ''' |
| flag_code = ''' |
| // If the shift amount is zero, no flags should be modified. |
| if (shiftAmt) { |
| int origCFBit = (cfofBits & CFBit) ? 1 : 0; |
| //Zero out any flags we might modify. This way we only have to |
| //worry about setting them. |
| PredcfofBits = PredcfofBits & ~(ext & (CFBit | OFBit)); |
| PredecfBit = PredecfBit & ~(ext & ECFBit); |
| |
| //Figure out what the OF bit should be. |
| if ((ext & OFBit) && (origCFBit ^ |
| bits(SrcReg1, dataSize * 8 - 1))) { |
| PredcfofBits = PredcfofBits | OFBit; |
| } |
| //If some combination of the CF bits need to be set, set them. |
| if ((ext & (CFBit | ECFBit)) && |
| (realShiftAmt == 0) ? origCFBit : |
| bits(SrcReg1, realShiftAmt - 1)) { |
| PredcfofBits = PredcfofBits | (ext & CFBit); |
| PredecfBit = PredecfBit | (ext & ECFBit); |
| } |
| |
| //Use the regular mechanisms to calculate the other flags. |
| uint64_t newFlags = genFlags(PredccFlagBits | PreddfBit | |
| PredezfBit, ext & ~(CFBit | ECFBit | OFBit), |
| DestReg, psrc1, op2); |
| |
| PredezfBit = newFlags & EZFBit; |
| PreddfBit = newFlags & DFBit; |
| PredccFlagBits = newFlags & ccFlagMask; |
| } |
| ''' |
| |
| class Rol(RegOp): |
| code = ''' |
| uint8_t shiftAmt = |
| (op2 & ((dataSize == 8) ? mask(6) : mask(5))); |
| uint8_t realShiftAmt = shiftAmt % (dataSize * 8); |
| if (realShiftAmt) { |
| uint64_t top = psrc1 << realShiftAmt; |
| uint64_t bottom = |
| bits(psrc1, dataSize * 8 - 1, dataSize * 8 - realShiftAmt); |
| DestReg = merge(DestReg, top | bottom, dataSize); |
| } else |
| DestReg = merge(DestReg, DestReg, dataSize); |
| ''' |
| flag_code = ''' |
| // If the shift amount is zero, no flags should be modified. |
| if (shiftAmt) { |
| //Zero out any flags we might modify. This way we only have to |
| //worry about setting them. |
| PredcfofBits = PredcfofBits & ~(ext & (CFBit | OFBit)); |
| PredecfBit = PredecfBit & ~(ext & ECFBit); |
| |
| //The CF bits, if set, would be set to the lsb of the result. |
| int lsb = DestReg & 0x1; |
| int msb = bits(DestReg, dataSize * 8 - 1); |
| //If some combination of the CF bits need to be set, set them. |
| if ((ext & (CFBit | ECFBit)) && lsb) { |
| PredcfofBits = PredcfofBits | (ext & CFBit); |
| PredecfBit = PredecfBit | (ext & ECFBit); |
| } |
| |
| //Figure out what the OF bit should be. |
| if ((ext & OFBit) && (msb ^ lsb)) |
| PredcfofBits = PredcfofBits | OFBit; |
| |
| //Use the regular mechanisms to calculate the other flags. |
| uint64_t newFlags = genFlags(PredccFlagBits | PreddfBit | |
| PredezfBit, ext & ~(CFBit | ECFBit | OFBit), |
| DestReg, psrc1, op2); |
| |
| PredezfBit = newFlags & EZFBit; |
| PreddfBit = newFlags & DFBit; |
| PredccFlagBits = newFlags & ccFlagMask; |
| } |
| ''' |
| |
| class Rcl(RegOp): |
| code = ''' |
| uint8_t shiftAmt = |
| (op2 & ((dataSize == 8) ? mask(6) : mask(5))); |
| uint8_t realShiftAmt = shiftAmt % (dataSize * 8 + 1); |
| if (realShiftAmt) { |
| CCFlagBits flags = cfofBits; |
| uint64_t top = psrc1 << realShiftAmt; |
| uint64_t bottom = flags.cf << (realShiftAmt - 1); |
| if(shiftAmt > 1) |
| bottom |= |
| bits(psrc1, dataSize * 8 - 1, |
| dataSize * 8 - realShiftAmt + 1); |
| DestReg = merge(DestReg, top | bottom, dataSize); |
| } else |
| DestReg = merge(DestReg, DestReg, dataSize); |
| ''' |
| flag_code = ''' |
| // If the shift amount is zero, no flags should be modified. |
| if (shiftAmt) { |
| int origCFBit = (cfofBits & CFBit) ? 1 : 0; |
| //Zero out any flags we might modify. This way we only have to |
| //worry about setting them. |
| PredcfofBits = PredcfofBits & ~(ext & (CFBit | OFBit)); |
| PredecfBit = PredecfBit & ~(ext & ECFBit); |
| |
| int msb = bits(DestReg, dataSize * 8 - 1); |
| int CFBits = bits(SrcReg1, dataSize * 8 - realShiftAmt); |
| //If some combination of the CF bits need to be set, set them. |
| if ((ext & (CFBit | ECFBit)) && |
| (realShiftAmt == 0) ? origCFBit : CFBits) { |
| PredcfofBits = PredcfofBits | (ext & CFBit); |
| PredecfBit = PredecfBit | (ext & ECFBit); |
| } |
| |
| //Figure out what the OF bit should be. |
| if ((ext & OFBit) && (msb ^ CFBits)) |
| PredcfofBits = PredcfofBits | OFBit; |
| |
| //Use the regular mechanisms to calculate the other flags. |
| uint64_t newFlags = genFlags(PredccFlagBits | PreddfBit | |
| PredezfBit, ext & ~(CFBit | ECFBit | OFBit), |
| DestReg, psrc1, op2); |
| |
| PredezfBit = newFlags & EZFBit; |
| PreddfBit = newFlags & DFBit; |
| PredccFlagBits = newFlags & ccFlagMask; |
| } |
| ''' |
| |
| class Sld(RegOp): |
| sldCode = ''' |
| uint8_t shiftAmt = (op2 & ((dataSize == 8) ? mask(6) : mask(5))); |
| uint8_t dataBits = dataSize * 8; |
| uint8_t realShiftAmt = shiftAmt %% (2 * dataBits); |
| uint64_t result; |
| if (realShiftAmt == 0) { |
| result = psrc1; |
| } else if (realShiftAmt < dataBits) { |
| result = (psrc1 << realShiftAmt) | |
| (DoubleBits >> (dataBits - realShiftAmt)); |
| } else { |
| result = (DoubleBits << (realShiftAmt - dataBits)) | |
| (psrc1 >> (2 * dataBits - realShiftAmt)); |
| } |
| %s |
| ''' |
| code = sldCode % "DestReg = merge(DestReg, result, dataSize);" |
| big_code = sldCode % "DestReg = result & mask(dataSize * 8);" |
| flag_code = ''' |
| // If the shift amount is zero, no flags should be modified. |
| if (shiftAmt) { |
| //Zero out any flags we might modify. This way we only have to |
| //worry about setting them. |
| PredcfofBits = PredcfofBits & ~(ext & (CFBit | OFBit)); |
| PredecfBit = PredecfBit & ~(ext & ECFBit); |
| int CFBits = 0; |
| |
| //Figure out if we -would- set the CF bits if requested. |
| if ((realShiftAmt == 0 && |
| bits(DoubleBits, 0)) || |
| (realShiftAmt <= dataBits && |
| bits(SrcReg1, dataBits - realShiftAmt)) || |
| (realShiftAmt > dataBits && |
| bits(DoubleBits, 2 * dataBits - realShiftAmt))) { |
| CFBits = 1; |
| } |
| |
| //If some combination of the CF bits need to be set, set them. |
| if ((ext & (CFBit | ECFBit)) && CFBits) { |
| PredcfofBits = PredcfofBits | (ext & CFBit); |
| PredecfBit = PredecfBit | (ext & ECFBit); |
| } |
| |
| //Figure out what the OF bit should be. |
| if ((ext & OFBit) && (bits(SrcReg1, dataBits - 1) ^ |
| bits(result, dataBits - 1))) |
| PredcfofBits = PredcfofBits | OFBit; |
| |
| //Use the regular mechanisms to calculate the other flags. |
| uint64_t newFlags = genFlags(PredccFlagBits | PreddfBit | |
| PredezfBit, ext & ~(CFBit | ECFBit | OFBit), |
| DestReg, psrc1, op2); |
| |
| PredezfBit = newFlags & EZFBit; |
| PreddfBit = newFlags & DFBit; |
| PredccFlagBits = newFlags & ccFlagMask; |
| } |
| ''' |
| |
| class Srd(RegOp): |
| srdCode = ''' |
| uint8_t shiftAmt = (op2 & ((dataSize == 8) ? mask(6) : mask(5))); |
| uint8_t dataBits = dataSize * 8; |
| uint8_t realShiftAmt = shiftAmt %% (2 * dataBits); |
| uint64_t result; |
| if (realShiftAmt == 0) { |
| result = psrc1; |
| } else if (realShiftAmt < dataBits) { |
| // Because what happens to the bits shift -in- on a right |
| // shift is not defined in the C/C++ standard, we have to |
| // mask them out to be sure they're zero. |
| uint64_t logicalMask = mask(dataBits - realShiftAmt); |
| result = ((psrc1 >> realShiftAmt) & logicalMask) | |
| (DoubleBits << (dataBits - realShiftAmt)); |
| } else { |
| uint64_t logicalMask = mask(2 * dataBits - realShiftAmt); |
| result = ((DoubleBits >> (realShiftAmt - dataBits)) & |
| logicalMask) | |
| (psrc1 << (2 * dataBits - realShiftAmt)); |
| } |
| %s |
| ''' |
| code = srdCode % "DestReg = merge(DestReg, result, dataSize);" |
| big_code = srdCode % "DestReg = result & mask(dataSize * 8);" |
| flag_code = ''' |
| // If the shift amount is zero, no flags should be modified. |
| if (shiftAmt) { |
| //Zero out any flags we might modify. This way we only have to |
| //worry about setting them. |
| PredcfofBits = PredcfofBits & ~(ext & (CFBit | OFBit)); |
| PredecfBit = PredecfBit & ~(ext & ECFBit); |
| int CFBits = 0; |
| |
| //If some combination of the CF bits need to be set, set them. |
| if ((realShiftAmt == 0 && |
| bits(DoubleBits, dataBits - 1)) || |
| (realShiftAmt <= dataBits && |
| bits(SrcReg1, realShiftAmt - 1)) || |
| (realShiftAmt > dataBits && |
| bits(DoubleBits, realShiftAmt - dataBits - 1))) { |
| CFBits = 1; |
| } |
| |
| //If some combination of the CF bits need to be set, set them. |
| if ((ext & (CFBit | ECFBit)) && CFBits) { |
| PredcfofBits = PredcfofBits | (ext & CFBit); |
| PredecfBit = PredecfBit | (ext & ECFBit); |
| } |
| |
| //Figure out what the OF bit should be. |
| if ((ext & OFBit) && (bits(SrcReg1, dataBits - 1) ^ |
| bits(result, dataBits - 1))) |
| PredcfofBits = PredcfofBits | OFBit; |
| |
| //Use the regular mechanisms to calculate the other flags. |
| uint64_t newFlags = genFlags(PredccFlagBits | PreddfBit | |
| PredezfBit, ext & ~(CFBit | ECFBit | OFBit), |
| DestReg, psrc1, op2); |
| |
| PredezfBit = newFlags & EZFBit; |
| PreddfBit = newFlags & DFBit; |
| PredccFlagBits = newFlags & ccFlagMask; |
| } |
| ''' |
| |
| class Mdb(WrRegOp): |
| code = 'DoubleBits = psrc1 ^ op2;' |
| |
| class Wrip(WrRegOp, CondRegOp): |
| code = 'NRIP = psrc1 + sop2 + CSBase;' |
| else_code = "NRIP = NRIP;" |
| |
| class Wruflags(WrRegOp): |
| code = ''' |
| uint64_t newFlags = psrc1 ^ op2; |
| cfofBits = newFlags & cfofMask; |
| ecfBit = newFlags & ECFBit; |
| ezfBit = newFlags & EZFBit; |
| dfBit = newFlags & DFBit; |
| ccFlagBits = newFlags & ccFlagMask; |
| ''' |
| |
| class Wrflags(WrRegOp): |
| code = ''' |
| MiscReg newFlags = psrc1 ^ op2; |
| MiscReg userFlagMask = 0xDD5; |
| |
| // Get only the user flags |
| ccFlagBits = newFlags & ccFlagMask; |
| dfBit = newFlags & DFBit; |
| cfofBits = newFlags & cfofMask; |
| ecfBit = 0; |
| ezfBit = 0; |
| |
| // Get everything else |
| nccFlagBits = newFlags & ~userFlagMask; |
| ''' |
| |
| class Rdip(RdRegOp): |
| code = 'DestReg = NRIP - CSBase;' |
| |
| class Ruflags(RdRegOp): |
| code = 'DestReg = ccFlagBits | cfofBits | dfBit | ecfBit | ezfBit;' |
| |
| class Rflags(RdRegOp): |
| code = ''' |
| DestReg = ccFlagBits | cfofBits | dfBit | |
| ecfBit | ezfBit | nccFlagBits; |
| ''' |
| |
| class Ruflag(RegOp): |
| code = ''' |
| int flag = bits(ccFlagBits | cfofBits | dfBit | |
| ecfBit | ezfBit, imm8); |
| DestReg = merge(DestReg, flag, dataSize); |
| ezfBit = (flag == 0) ? EZFBit : 0; |
| ''' |
| |
| big_code = ''' |
| int flag = bits(ccFlagBits | cfofBits | dfBit | |
| ecfBit | ezfBit, imm8); |
| DestReg = flag & mask(dataSize * 8); |
| ezfBit = (flag == 0) ? EZFBit : 0; |
| ''' |
| |
| def __init__(self, dest, imm, flags=None, \ |
| dataSize="env.dataSize"): |
| super(Ruflag, self).__init__(dest, \ |
| "InstRegIndex(NUM_INTREGS)", imm, flags, dataSize) |
| |
| class Rflag(RegOp): |
| code = ''' |
| MiscReg flagMask = 0x3F7FDD5; |
| MiscReg flags = (nccFlagBits | ccFlagBits | cfofBits | dfBit | |
| ecfBit | ezfBit) & flagMask; |
| |
| int flag = bits(flags, imm8); |
| DestReg = merge(DestReg, flag, dataSize); |
| ezfBit = (flag == 0) ? EZFBit : 0; |
| ''' |
| |
| big_code = ''' |
| MiscReg flagMask = 0x3F7FDD5; |
| MiscReg flags = (nccFlagBits | ccFlagBits | cfofBits | dfBit | |
| ecfBit | ezfBit) & flagMask; |
| |
| int flag = bits(flags, imm8); |
| DestReg = flag & mask(dataSize * 8); |
| ezfBit = (flag == 0) ? EZFBit : 0; |
| ''' |
| |
| def __init__(self, dest, imm, flags=None, \ |
| dataSize="env.dataSize"): |
| super(Rflag, self).__init__(dest, \ |
| "InstRegIndex(NUM_INTREGS)", imm, flags, dataSize) |
| |
| class Sext(RegOp): |
| code = ''' |
| IntReg val = psrc1; |
| // Mask the bit position so that it wraps. |
| int bitPos = op2 & (dataSize * 8 - 1); |
| int sign_bit = bits(val, bitPos, bitPos); |
| uint64_t maskVal = mask(bitPos+1); |
| val = sign_bit ? (val | ~maskVal) : (val & maskVal); |
| DestReg = merge(DestReg, val, dataSize); |
| ''' |
| |
| big_code = ''' |
| IntReg val = psrc1; |
| // Mask the bit position so that it wraps. |
| int bitPos = op2 & (dataSize * 8 - 1); |
| int sign_bit = bits(val, bitPos, bitPos); |
| uint64_t maskVal = mask(bitPos+1); |
| val = sign_bit ? (val | ~maskVal) : (val & maskVal); |
| DestReg = val & mask(dataSize * 8); |
| ''' |
| |
| flag_code = ''' |
| if (!sign_bit) { |
| PredccFlagBits = PredccFlagBits & ~(ext & (ZFBit)); |
| PredcfofBits = PredcfofBits & ~(ext & (CFBit)); |
| PredecfBit = PredecfBit & ~(ext & ECFBit); |
| PredezfBit = PredezfBit & ~(ext & EZFBit); |
| } else { |
| PredccFlagBits = PredccFlagBits | (ext & (ZFBit)); |
| PredcfofBits = PredcfofBits | (ext & (CFBit)); |
| PredecfBit = PredecfBit | (ext & ECFBit); |
| PredezfBit = PredezfBit | (ext & EZFBit); |
| } |
| ''' |
| |
| class Zext(RegOp): |
| code = 'DestReg = merge(DestReg, bits(psrc1, op2, 0), dataSize);' |
| big_code = 'DestReg = bits(psrc1, op2, 0) & mask(dataSize * 8);' |
| |
| class Rddr(RegOp): |
| def __init__(self, dest, src1, flags=None, dataSize="env.dataSize"): |
| super(Rddr, self).__init__(dest, \ |
| src1, "InstRegIndex(NUM_INTREGS)", flags, dataSize) |
| rdrCode = ''' |
| CR4 cr4 = CR4Op; |
| DR7 dr7 = DR7Op; |
| if ((cr4.de == 1 && (src1 == 4 || src1 == 5)) || src1 >= 8) { |
| fault = std::make_shared<InvalidOpcode>(); |
| } else if (dr7.gd) { |
| fault = std::make_shared<DebugException>(); |
| } else { |
| %s |
| } |
| ''' |
| code = rdrCode % "DestReg = merge(DestReg, DebugSrc1, dataSize);" |
| big_code = rdrCode % "DestReg = DebugSrc1 & mask(dataSize * 8);" |
| |
| class Wrdr(RegOp): |
| def __init__(self, dest, src1, flags=None, dataSize="env.dataSize"): |
| super(Wrdr, self).__init__(dest, \ |
| src1, "InstRegIndex(NUM_INTREGS)", flags, dataSize) |
| code = ''' |
| CR4 cr4 = CR4Op; |
| DR7 dr7 = DR7Op; |
| if ((cr4.de == 1 && (dest == 4 || dest == 5)) || dest >= 8) { |
| fault = std::make_shared<InvalidOpcode>(); |
| } else if ((dest == 6 || dest == 7) && bits(psrc1, 63, 32) && |
| machInst.mode.mode == LongMode) { |
| fault = std::make_shared<GeneralProtection>(0); |
| } else if (dr7.gd) { |
| fault = std::make_shared<DebugException>(); |
| } else { |
| DebugDest = psrc1; |
| } |
| ''' |
| |
| class Rdcr(RegOp): |
| def __init__(self, dest, src1, flags=None, dataSize="env.dataSize"): |
| super(Rdcr, self).__init__(dest, \ |
| src1, "InstRegIndex(NUM_INTREGS)", flags, dataSize) |
| rdcrCode = ''' |
| if (src1 == 1 || (src1 > 4 && src1 < 8) || (src1 > 8)) { |
| fault = std::make_shared<InvalidOpcode>(); |
| } else { |
| %s |
| } |
| ''' |
| code = rdcrCode % "DestReg = merge(DestReg, ControlSrc1, dataSize);" |
| big_code = rdcrCode % "DestReg = ControlSrc1 & mask(dataSize * 8);" |
| |
| class Wrcr(RegOp): |
| def __init__(self, dest, src1, flags=None, dataSize="env.dataSize"): |
| super(Wrcr, self).__init__(dest, \ |
| src1, "InstRegIndex(NUM_INTREGS)", flags, dataSize) |
| code = ''' |
| if (dest == 1 || (dest > 4 && dest < 8) || (dest > 8)) { |
| fault = std::make_shared<InvalidOpcode>(); |
| } else { |
| // There are *s in the line below so it doesn't confuse the |
| // parser. They may be unnecessary. |
| //Mis*cReg old*Val = pick(Cont*rolDest, 0, dat*aSize); |
| MiscReg newVal = psrc1; |
| |
| // Check for any modifications that would cause a fault. |
| switch(dest) { |
| case 0: |
| { |
| Efer efer = EferOp; |
| CR0 cr0 = newVal; |
| CR4 oldCr4 = CR4Op; |
| if (bits(newVal, 63, 32) || |
| (!cr0.pe && cr0.pg) || |
| (!cr0.cd && cr0.nw) || |
| (cr0.pg && efer.lme && !oldCr4.pae)) |
| fault = std::make_shared<GeneralProtection>(0); |
| } |
| break; |
| case 2: |
| break; |
| case 3: |
| break; |
| case 4: |
| { |
| CR4 cr4 = newVal; |
| // PAE can't be disabled in long mode. |
| if (bits(newVal, 63, 11) || |
| (machInst.mode.mode == LongMode && !cr4.pae)) |
| fault = std::make_shared<GeneralProtection>(0); |
| } |
| break; |
| case 8: |
| { |
| if (bits(newVal, 63, 4)) |
| fault = std::make_shared<GeneralProtection>(0); |
| } |
| break; |
| default: |
| fault = std::make_shared<GenericISA::M5PanicFault>( |
| "Unrecognized control register %d.\\n", dest); |
| } |
| ControlDest = newVal; |
| } |
| ''' |
| |
| # Microops for manipulating segmentation registers |
| class SegOp(CondRegOp): |
| abstract = True |
| def __init__(self, dest, src1, flags=None, dataSize="env.dataSize"): |
| super(SegOp, self).__init__(dest, \ |
| src1, "InstRegIndex(NUM_INTREGS)", flags, dataSize) |
| |
| class Wrbase(SegOp): |
| code = ''' |
| SegBaseDest = psrc1; |
| ''' |
| |
| class Wrlimit(SegOp): |
| code = ''' |
| SegLimitDest = psrc1; |
| ''' |
| |
| class Wrsel(SegOp): |
| code = ''' |
| SegSelDest = psrc1; |
| ''' |
| |
| class WrAttr(SegOp): |
| code = ''' |
| SegAttrDest = psrc1; |
| ''' |
| |
| class Rdbase(SegOp): |
| code = 'DestReg = merge(DestReg, SegBaseSrc1, dataSize);' |
| big_code = 'DestReg = SegBaseSrc1 & mask(dataSize * 8);' |
| |
| class Rdlimit(SegOp): |
| code = 'DestReg = merge(DestReg, SegLimitSrc1, dataSize);' |
| big_code = 'DestReg = SegLimitSrc1 & mask(dataSize * 8);' |
| |
| class RdAttr(SegOp): |
| code = 'DestReg = merge(DestReg, SegAttrSrc1, dataSize);' |
| big_code = 'DestReg = SegAttrSrc1 & mask(dataSize * 8);' |
| |
| class Rdsel(SegOp): |
| code = 'DestReg = merge(DestReg, SegSelSrc1, dataSize);' |
| big_code = 'DestReg = SegSelSrc1 & mask(dataSize * 8);' |
| |
| class Rdval(RegOp): |
| def __init__(self, dest, src1, flags=None, dataSize="env.dataSize"): |
| super(Rdval, self).__init__(dest, src1, \ |
| "InstRegIndex(NUM_INTREGS)", flags, dataSize) |
| code = ''' |
| DestReg = MiscRegSrc1; |
| ''' |
| |
| class Wrval(RegOp): |
| def __init__(self, dest, src1, flags=None, dataSize="env.dataSize"): |
| super(Wrval, self).__init__(dest, src1, \ |
| "InstRegIndex(NUM_INTREGS)", flags, dataSize) |
| code = ''' |
| MiscRegDest = SrcReg1; |
| ''' |
| |
| class Chks(RegOp): |
| def __init__(self, dest, src1, src2=0, |
| flags=None, dataSize="env.dataSize"): |
| super(Chks, self).__init__(dest, |
| src1, src2, flags, dataSize) |
| code = ''' |
| // The selector is in source 1 and can be at most 16 bits. |
| SegSelector selector = DestReg; |
| SegDescriptor desc = SrcReg1; |
| HandyM5Reg m5reg = M5Reg; |
| |
| switch (imm8) |
| { |
| case SegNoCheck: |
| break; |
| case SegCSCheck: |
| // Make sure it's the right type |
| if (desc.s == 0 || desc.type.codeOrData != 1) { |
| fault = std::make_shared<GeneralProtection>(0); |
| } else if (m5reg.cpl != desc.dpl) { |
| fault = std::make_shared<GeneralProtection>(0); |
| } |
| break; |
| case SegCallGateCheck: |
| fault = std::make_shared<GenericISA::M5PanicFault>( |
| "CS checks for far " |
| "calls/jumps through call gates not implemented.\\n"); |
| break; |
| case SegSoftIntGateCheck: |
| // Check permissions. |
| if (desc.dpl < m5reg.cpl) { |
| fault = std::make_shared<GeneralProtection>(selector); |
| break; |
| } |
| M5_FALLTHROUGH; |
| case SegIntGateCheck: |
| // Make sure the gate's the right type. |
| if ((m5reg.mode == LongMode && (desc.type & 0xe) != 0xe) || |
| ((desc.type & 0x6) != 0x6)) { |
| fault = std::make_shared<GeneralProtection>(0); |
| } |
| break; |
| case SegSSCheck: |
| if (selector.si || selector.ti) { |
| if (!desc.p) { |
| fault = std::make_shared<StackFault>(selector); |
| } else if (!(desc.s == 1 && desc.type.codeOrData == 0 && |
| desc.type.w) || |
| (desc.dpl != m5reg.cpl) || |
| (selector.rpl != m5reg.cpl)) { |
| fault = std::make_shared<GeneralProtection>(selector); |
| } |
| } else if (m5reg.submode != SixtyFourBitMode || |
| m5reg.cpl == 3) { |
| fault = std::make_shared<GeneralProtection>(selector); |
| } |
| break; |
| case SegIretCheck: |
| { |
| if ((!selector.si && !selector.ti) || |
| (selector.rpl < m5reg.cpl) || |
| !(desc.s == 1 && desc.type.codeOrData == 1) || |
| (!desc.type.c && desc.dpl != selector.rpl) || |
| (desc.type.c && desc.dpl > selector.rpl)) { |
| fault = std::make_shared<GeneralProtection>(selector); |
| } else if (!desc.p) { |
| fault = std::make_shared<SegmentNotPresent>(selector); |
| } |
| break; |
| } |
| case SegIntCSCheck: |
| if (m5reg.mode == LongMode) { |
| if (desc.l != 1 || desc.d != 0) { |
| fault = std::make_shared<GeneralProtection>(selector); |
| } |
| } else { |
| fault = std::make_shared<GenericISA::M5PanicFault>( |
| "Interrupt CS " |
| "checks not implemented in legacy mode.\\n"); |
| } |
| break; |
| case SegTRCheck: |
| if (!selector.si || selector.ti) { |
| fault = std::make_shared<GeneralProtection>(selector); |
| } |
| break; |
| case SegTSSCheck: |
| if (!desc.p) { |
| fault = std::make_shared<SegmentNotPresent>(selector); |
| } else if (!(desc.type == 0x9 || |
| (desc.type == 1 && |
| m5reg.mode != LongMode))) { |
| fault = std::make_shared<GeneralProtection>(selector); |
| } |
| break; |
| case SegInGDTCheck: |
| if (selector.ti) { |
| fault = std::make_shared<GeneralProtection>(selector); |
| } |
| break; |
| case SegLDTCheck: |
| if (!desc.p) { |
| fault = std::make_shared<SegmentNotPresent>(selector); |
| } else if (desc.type != 0x2) { |
| fault = std::make_shared<GeneralProtection>(selector); |
| } |
| break; |
| default: |
| fault = std::make_shared<GenericISA::M5PanicFault>( |
| "Undefined segment check type.\\n"); |
| } |
| ''' |
| flag_code = ''' |
| // Check for a NULL selector and set ZF,EZF appropriately. |
| PredccFlagBits = PredccFlagBits & ~(ext & ZFBit); |
| PredezfBit = PredezfBit & ~(ext & EZFBit); |
| |
| if (!selector.si && !selector.ti) { |
| PredccFlagBits = PredccFlagBits | (ext & ZFBit); |
| PredezfBit = PredezfBit | (ext & EZFBit); |
| } |
| ''' |
| |
| class Wrdh(RegOp): |
| code = ''' |
| SegDescriptor desc = SrcReg1; |
| |
| uint64_t target = bits(SrcReg2, 31, 0) << 32; |
| switch(desc.type) { |
| case LDT64: |
| case AvailableTSS64: |
| case BusyTSS64: |
| replaceBits(target, 23, 0, desc.baseLow); |
| replaceBits(target, 31, 24, desc.baseHigh); |
| break; |
| case CallGate64: |
| case IntGate64: |
| case TrapGate64: |
| replaceBits(target, 15, 0, bits(desc, 15, 0)); |
| replaceBits(target, 31, 16, bits(desc, 63, 48)); |
| break; |
| default: |
| fault = std::make_shared<GenericISA::M5PanicFault>( |
| "Wrdh used with wrong descriptor type!\\n"); |
| } |
| DestReg = target; |
| ''' |
| |
| class Wrtsc(WrRegOp): |
| code = ''' |
| TscOp = psrc1; |
| ''' |
| |
| class Rdtsc(RdRegOp): |
| code = ''' |
| DestReg = TscOp; |
| ''' |
| |
| class Rdm5reg(RdRegOp): |
| code = ''' |
| DestReg = M5Reg; |
| ''' |
| |
| class Wrdl(RegOp): |
| code = ''' |
| SegDescriptor desc = SrcReg1; |
| SegSelector selector = SrcReg2; |
| // This while loop is so we can use break statements in the code |
| // below to skip the rest of this section without a bunch of |
| // nesting. |
| while (true) { |
| if (selector.si || selector.ti) { |
| if (!desc.p) { |
| fault = std::make_shared<GenericISA::M5PanicFault>( |
| "Segment not present.\\n"); |
| break; |
| } |
| SegAttr attr = 0; |
| attr.dpl = desc.dpl; |
| attr.unusable = 0; |
| attr.defaultSize = desc.d; |
| attr.longMode = desc.l; |
| attr.avl = desc.avl; |
| attr.granularity = desc.g; |
| attr.present = desc.p; |
| attr.system = desc.s; |
| attr.type = desc.type; |
| if (!desc.s) { |
| // The expand down bit happens to be set for gates. |
| if (desc.type.e) { |
| fault = std::make_shared<GenericISA::M5PanicFault>( |
| "Gate descriptor encountered.\\n"); |
| break; |
| } |
| attr.readable = 1; |
| attr.writable = 1; |
| attr.expandDown = 0; |
| } else { |
| if (desc.type.codeOrData) { |
| attr.expandDown = 0; |
| attr.readable = desc.type.r; |
| attr.writable = 0; |
| } else { |
| attr.expandDown = desc.type.e; |
| attr.readable = 1; |
| attr.writable = desc.type.w; |
| } |
| } |
| Addr base = desc.baseLow | (desc.baseHigh << 24); |
| Addr limit = desc.limitLow | (desc.limitHigh << 16); |
| if (desc.g) |
| limit = (limit << 12) | mask(12); |
| SegBaseDest = base; |
| SegLimitDest = limit; |
| SegAttrDest = attr; |
| } else { |
| SegBaseDest = SegBaseDest; |
| SegLimitDest = SegLimitDest; |
| SegAttrDest = SegAttrDest; |
| } |
| break; |
| } |
| ''' |
| |
| class Wrxftw(WrRegOp): |
| def __init__(self, src1, **kwargs): |
| super(Wrxftw, self).__init__(src1, "InstRegIndex(NUM_INTREGS)", \ |
| **kwargs) |
| |
| code = ''' |
| FTW = X86ISA::convX87XTagsToTags(SrcReg1); |
| ''' |
| |
| class Rdxftw(RdRegOp): |
| code = ''' |
| DestReg = X86ISA::convX87TagsToXTags(FTW); |
| ''' |
| }}; |
