blob: fe0982708e9528cdaaaca6cd1e1996558c4a0806 [file] [log] [blame]
/*
* Copyright (c) 2016 Intel Corporation
*
* Permission to use, copy, modify, distribute, and sell this software and its
* documentation for any purpose is hereby granted without fee, provided that
* the above copyright notice appear in all copies and that both that copyright
* notice and this permission notice appear in supporting documentation, and
* that the name of the copyright holders not be used in advertising or
* publicity pertaining to distribution of the software without specific,
* written prior permission. The copyright holders make no representations
* about the suitability of this software for any purpose. It is provided "as
* is" without express or implied warranty.
*
* THE COPYRIGHT HOLDERS DISCLAIM ALL WARRANTIES WITH REGARD TO THIS SOFTWARE,
* INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO
* EVENT SHALL THE COPYRIGHT HOLDERS BE LIABLE FOR ANY SPECIAL, INDIRECT OR
* CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE,
* DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER
* TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE
* OF THIS SOFTWARE.
*/
#include <drm/drmP.h>
#include <drm/drm_crtc.h>
#include <drm/drm_color_mgmt.h>
#include "drm_crtc_internal.h"
/**
* DOC: overview
*
* Color management or color space adjustments is supported through a set of 5
* properties on the &drm_crtc object. They are set up by calling
* drm_crtc_enable_color_mgmt().
*
* "DEGAMMA_LUT”:
* Blob property to set the degamma lookup table (LUT) mapping pixel data
* from the framebuffer before it is given to the transformation matrix.
* The data is interpreted as an array of &struct drm_color_lut elements.
* Hardware might choose not to use the full precision of the LUT elements
* nor use all the elements of the LUT (for example the hardware might
* choose to interpolate between LUT[0] and LUT[4]).
*
* Setting this to NULL (blob property value set to 0) means a
* linear/pass-thru gamma table should be used. This is generally the
* driver boot-up state too. Drivers can access this blob through
* &drm_crtc_state.degamma_lut.
*
* “DEGAMMA_LUT_SIZE”:
* Unsinged range property to give the size of the lookup table to be set
* on the DEGAMMA_LUT property (the size depends on the underlying
* hardware). If drivers support multiple LUT sizes then they should
* publish the largest size, and sub-sample smaller sized LUTs (e.g. for
* split-gamma modes) appropriately.
*
* “CTM”:
* Blob property to set the current transformation matrix (CTM) apply to
* pixel data after the lookup through the degamma LUT and before the
* lookup through the gamma LUT. The data is interpreted as a struct
* &drm_color_ctm.
*
* Setting this to NULL (blob property value set to 0) means a
* unit/pass-thru matrix should be used. This is generally the driver
* boot-up state too. Drivers can access the blob for the color conversion
* matrix through &drm_crtc_state.ctm.
*
* “GAMMA_LUT”:
* Blob property to set the gamma lookup table (LUT) mapping pixel data
* after the transformation matrix to data sent to the connector. The
* data is interpreted as an array of &struct drm_color_lut elements.
* Hardware might choose not to use the full precision of the LUT elements
* nor use all the elements of the LUT (for example the hardware might
* choose to interpolate between LUT[0] and LUT[4]).
*
* Setting this to NULL (blob property value set to 0) means a
* linear/pass-thru gamma table should be used. This is generally the
* driver boot-up state too. Drivers can access this blob through
* &drm_crtc_state.gamma_lut.
*
* “GAMMA_LUT_SIZE”:
* Unsigned range property to give the size of the lookup table to be set
* on the GAMMA_LUT property (the size depends on the underlying hardware).
* If drivers support multiple LUT sizes then they should publish the
* largest size, and sub-sample smaller sized LUTs (e.g. for split-gamma
* modes) appropriately.
*
* There is also support for a legacy gamma table, which is set up by calling
* drm_mode_crtc_set_gamma_size(). Drivers which support both should use
* drm_atomic_helper_legacy_gamma_set() to alias the legacy gamma ramp with the
* "GAMMA_LUT" property above.
*/
/**
* drm_color_lut_extract - clamp and round LUT entries
* @user_input: input value
* @bit_precision: number of bits the hw LUT supports
*
* Extract a degamma/gamma LUT value provided by user (in the form of
* &drm_color_lut entries) and round it to the precision supported by the
* hardware.
*/
uint32_t drm_color_lut_extract(uint32_t user_input, uint32_t bit_precision)
{
uint32_t val = user_input;
uint32_t max = 0xffff >> (16 - bit_precision);
/* Round only if we're not using full precision. */
if (bit_precision < 16) {
val += 1UL << (16 - bit_precision - 1);
val >>= 16 - bit_precision;
}
return clamp_val(val, 0, max);
}
EXPORT_SYMBOL(drm_color_lut_extract);
/**
* drm_crtc_enable_color_mgmt - enable color management properties
* @crtc: DRM CRTC
* @degamma_lut_size: the size of the degamma lut (before CSC)
* @has_ctm: whether to attach ctm_property for CSC matrix
* @gamma_lut_size: the size of the gamma lut (after CSC)
*
* This function lets the driver enable the color correction
* properties on a CRTC. This includes 3 degamma, csc and gamma
* properties that userspace can set and 2 size properties to inform
* the userspace of the lut sizes. Each of the properties are
* optional. The gamma and degamma properties are only attached if
* their size is not 0 and ctm_property is only attached if has_ctm is
* true.
*
* Drivers should use drm_atomic_helper_legacy_gamma_set() to implement the
* legacy &drm_crtc_funcs.gamma_set callback.
*/
void drm_crtc_enable_color_mgmt(struct drm_crtc *crtc,
uint degamma_lut_size,
bool has_ctm,
uint gamma_lut_size)
{
struct drm_device *dev = crtc->dev;
struct drm_mode_config *config = &dev->mode_config;
if (degamma_lut_size) {
drm_object_attach_property(&crtc->base,
config->degamma_lut_property, 0);
drm_object_attach_property(&crtc->base,
config->degamma_lut_size_property,
degamma_lut_size);
}
if (has_ctm)
drm_object_attach_property(&crtc->base,
config->ctm_property, 0);
if (gamma_lut_size) {
drm_object_attach_property(&crtc->base,
config->gamma_lut_property, 0);
drm_object_attach_property(&crtc->base,
config->gamma_lut_size_property,
gamma_lut_size);
}
}
EXPORT_SYMBOL(drm_crtc_enable_color_mgmt);
/**
* drm_mode_crtc_set_gamma_size - set the gamma table size
* @crtc: CRTC to set the gamma table size for
* @gamma_size: size of the gamma table
*
* Drivers which support gamma tables should set this to the supported gamma
* table size when initializing the CRTC. Currently the drm core only supports a
* fixed gamma table size.
*
* Returns:
* Zero on success, negative errno on failure.
*/
int drm_mode_crtc_set_gamma_size(struct drm_crtc *crtc,
int gamma_size)
{
uint16_t *r_base, *g_base, *b_base;
int i;
crtc->gamma_size = gamma_size;
crtc->gamma_store = kcalloc(gamma_size, sizeof(uint16_t) * 3,
GFP_KERNEL);
if (!crtc->gamma_store) {
crtc->gamma_size = 0;
return -ENOMEM;
}
r_base = crtc->gamma_store;
g_base = r_base + gamma_size;
b_base = g_base + gamma_size;
for (i = 0; i < gamma_size; i++) {
r_base[i] = i << 8;
g_base[i] = i << 8;
b_base[i] = i << 8;
}
return 0;
}
EXPORT_SYMBOL(drm_mode_crtc_set_gamma_size);
/**
* drm_mode_gamma_set_ioctl - set the gamma table
* @dev: DRM device
* @data: ioctl data
* @file_priv: DRM file info
*
* Set the gamma table of a CRTC to the one passed in by the user. Userspace can
* inquire the required gamma table size through drm_mode_gamma_get_ioctl.
*
* Called by the user via ioctl.
*
* Returns:
* Zero on success, negative errno on failure.
*/
int drm_mode_gamma_set_ioctl(struct drm_device *dev,
void *data, struct drm_file *file_priv)
{
struct drm_mode_crtc_lut *crtc_lut = data;
struct drm_crtc *crtc;
void *r_base, *g_base, *b_base;
int size;
struct drm_modeset_acquire_ctx ctx;
int ret = 0;
if (!drm_core_check_feature(dev, DRIVER_MODESET))
return -EINVAL;
crtc = drm_crtc_find(dev, crtc_lut->crtc_id);
if (!crtc)
return -ENOENT;
if (crtc->funcs->gamma_set == NULL)
return -ENOSYS;
/* memcpy into gamma store */
if (crtc_lut->gamma_size != crtc->gamma_size)
return -EINVAL;
drm_modeset_acquire_init(&ctx, 0);
retry:
ret = drm_modeset_lock_all_ctx(dev, &ctx);
if (ret)
goto out;
size = crtc_lut->gamma_size * (sizeof(uint16_t));
r_base = crtc->gamma_store;
if (copy_from_user(r_base, (void __user *)(unsigned long)crtc_lut->red, size)) {
ret = -EFAULT;
goto out;
}
g_base = r_base + size;
if (copy_from_user(g_base, (void __user *)(unsigned long)crtc_lut->green, size)) {
ret = -EFAULT;
goto out;
}
b_base = g_base + size;
if (copy_from_user(b_base, (void __user *)(unsigned long)crtc_lut->blue, size)) {
ret = -EFAULT;
goto out;
}
ret = crtc->funcs->gamma_set(crtc, r_base, g_base, b_base,
crtc->gamma_size, &ctx);
out:
if (ret == -EDEADLK) {
drm_modeset_backoff(&ctx);
goto retry;
}
drm_modeset_drop_locks(&ctx);
drm_modeset_acquire_fini(&ctx);
return ret;
}
/**
* drm_mode_gamma_get_ioctl - get the gamma table
* @dev: DRM device
* @data: ioctl data
* @file_priv: DRM file info
*
* Copy the current gamma table into the storage provided. This also provides
* the gamma table size the driver expects, which can be used to size the
* allocated storage.
*
* Called by the user via ioctl.
*
* Returns:
* Zero on success, negative errno on failure.
*/
int drm_mode_gamma_get_ioctl(struct drm_device *dev,
void *data, struct drm_file *file_priv)
{
struct drm_mode_crtc_lut *crtc_lut = data;
struct drm_crtc *crtc;
void *r_base, *g_base, *b_base;
int size;
int ret = 0;
if (!drm_core_check_feature(dev, DRIVER_MODESET))
return -EINVAL;
crtc = drm_crtc_find(dev, crtc_lut->crtc_id);
if (!crtc)
return -ENOENT;
/* memcpy into gamma store */
if (crtc_lut->gamma_size != crtc->gamma_size)
return -EINVAL;
drm_modeset_lock(&crtc->mutex, NULL);
size = crtc_lut->gamma_size * (sizeof(uint16_t));
r_base = crtc->gamma_store;
if (copy_to_user((void __user *)(unsigned long)crtc_lut->red, r_base, size)) {
ret = -EFAULT;
goto out;
}
g_base = r_base + size;
if (copy_to_user((void __user *)(unsigned long)crtc_lut->green, g_base, size)) {
ret = -EFAULT;
goto out;
}
b_base = g_base + size;
if (copy_to_user((void __user *)(unsigned long)crtc_lut->blue, b_base, size)) {
ret = -EFAULT;
goto out;
}
out:
drm_modeset_unlock(&crtc->mutex);
return ret;
}