| # -*- coding: utf-8 -*- |
| # Copyright (c) 2018 The Regents of the University of California |
| # All Rights Reserved. |
| # |
| # Redistribution and use in source and binary forms, with or without |
| # modification, are permitted provided that the following conditions are |
| # met: redistributions of source code must retain the above copyright |
| # notice, this list of conditions and the following disclaimer; |
| # redistributions in binary form must reproduce the above copyright |
| # notice, this list of conditions and the following disclaimer in the |
| # documentation and/or other materials provided with the distribution; |
| # neither the name of the copyright holders nor the names of its |
| # contributors may be used to endorse or promote products derived from |
| # this software without specific prior written permission. |
| # |
| # THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS |
| # "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT |
| # LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR |
| # A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT |
| # OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, |
| # SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT |
| # LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, |
| # DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY |
| # THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT |
| # (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE |
| # OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. |
| # |
| # Authors: Jason Lowe-Power |
| |
| import m5 |
| from m5.objects import * |
| from m5.util import convert |
| from .fs_tools import * |
| from .caches import * |
| |
| |
| class MySystem(System): |
| |
| def __init__(self, kernel, disk, num_cpus, TimingCPUModel, no_kvm=False): |
| super(MySystem, self).__init__() |
| self._no_kvm = no_kvm |
| |
| self._host_parallel = True |
| |
| # Set up the clock domain and the voltage domain |
| self.clk_domain = SrcClockDomain() |
| self.clk_domain.clock = '2.3GHz' |
| self.clk_domain.voltage_domain = VoltageDomain() |
| |
| mem_size = '32GB' |
| self.mem_ranges = [AddrRange('100MB'), # For kernel |
| AddrRange(0xC0000000, size=0x100000), # For I/0 |
| AddrRange(Addr('4GB'), size = mem_size) # All data |
| ] |
| |
| # Create the main memory bus |
| # This connects to main memory |
| self.membus = SystemXBar(width = 64) # 64-byte width |
| self.membus.badaddr_responder = BadAddr() |
| self.membus.default = Self.badaddr_responder.pio |
| |
| # Set up the system port for functional access from the simulator |
| self.system_port = self.membus.cpu_side_ports |
| |
| self.initFS(self.membus, num_cpus) |
| |
| # Replace these paths with the path to your disk images. |
| # The first disk is the root disk. The second could be used for swap |
| # or anything else. |
| self.setDiskImages(disk, disk) |
| |
| # Change this path to point to the kernel you want to use |
| self.workload.object_file = kernel |
| # Options specified on the kernel command line |
| boot_options = ['earlyprintk=ttyS0', 'console=ttyS0', 'lpj=7999923', |
| 'root=/dev/hda1'] |
| |
| self.workload.command_line = ' '.join(boot_options) |
| |
| # Create the CPUs for our system. |
| self.createCPU(num_cpus, TimingCPUModel) |
| |
| # Create the cache heirarchy for the system. |
| self.createCacheHierarchy() |
| |
| # Set up the interrupt controllers for the system (x86 specific) |
| self.setupInterrupts() |
| |
| self.createMemoryControllersDDR4() |
| |
| if self._host_parallel: |
| # To get the KVM CPUs to run on different host CPUs |
| # Specify a different event queue for each CPU |
| for i,cpu in enumerate(self.cpu): |
| for obj in cpu.descendants(): |
| obj.eventq_index = 0 |
| cpu.eventq_index = i + 1 |
| |
| def getHostParallel(self): |
| return self._host_parallel |
| |
| def totalInsts(self): |
| return sum([cpu.totalInsts() for cpu in self.cpu]) |
| |
| def createCPUThreads(self, cpu): |
| for c in cpu: |
| c.createThreads() |
| |
| def createCPU(self, num_cpus, TimingCPUModel): |
| if self._no_kvm: |
| self.cpu = [AtomicSimpleCPU(cpu_id = i, switched_out = False) |
| for i in range(num_cpus)] |
| self.createCPUThreads(self.cpu) |
| self.mem_mode = 'timing' |
| |
| else: |
| # Note KVM needs a VM and atomic_noncaching |
| self.cpu = [X86KvmCPU(cpu_id = i) |
| for i in range(num_cpus)] |
| self.createCPUThreads(self.cpu) |
| self.kvm_vm = KvmVM() |
| self.mem_mode = 'atomic_noncaching' |
| |
| self.atomicCpu = [AtomicSimpleCPU(cpu_id = i, |
| switched_out = True) |
| for i in range(num_cpus)] |
| self.createCPUThreads(self.atomicCpu) |
| |
| self.detailed_cpu = [TimingCPUModel(cpu_id = i, |
| switched_out = True) |
| for i in range(num_cpus)] |
| |
| self.createCPUThreads(self.detailed_cpu) |
| |
| def switchCpus(self, old, new): |
| assert(new[0].switchedOut()) |
| m5.switchCpus(self, list(zip(old, new))) |
| |
| def setDiskImages(self, img_path_1, img_path_2): |
| disk0 = CowDisk(img_path_1) |
| disk2 = CowDisk(img_path_2) |
| self.pc.south_bridge.ide.disks = [disk0, disk2] |
| |
| def createCacheHierarchy(self): |
| # Create an L3 cache (with crossbar) |
| self.l3bus = L2XBar(width = 64, |
| snoop_filter = SnoopFilter(max_capacity='32MB')) |
| |
| for cpu in self.cpu: |
| # Create a memory bus, a coherent crossbar, in this case |
| cpu.l2bus = L2XBar() |
| |
| # Create an L1 instruction and data cache |
| cpu.icache = L1ICache() |
| cpu.dcache = L1DCache() |
| cpu.mmucache = MMUCache() |
| |
| # Connect the instruction and data caches to the CPU |
| cpu.icache.connectCPU(cpu) |
| cpu.dcache.connectCPU(cpu) |
| cpu.mmucache.connectCPU(cpu) |
| |
| # Hook the CPU ports up to the l2bus |
| cpu.icache.connectBus(cpu.l2bus) |
| cpu.dcache.connectBus(cpu.l2bus) |
| cpu.mmucache.connectBus(cpu.l2bus) |
| |
| # Create an L2 cache and connect it to the l2bus |
| cpu.l2cache = L2Cache() |
| cpu.l2cache.connectCPUSideBus(cpu.l2bus) |
| |
| # Connect the L2 cache to the L3 bus |
| cpu.l2cache.connectMemSideBus(self.l3bus) |
| |
| self.l3cache = L3Cache() |
| self.l3cache.connectCPUSideBus(self.l3bus) |
| |
| # Connect the L3 cache to the membus |
| self.l3cache.connectMemSideBus(self.membus) |
| |
| def setupInterrupts(self): |
| for cpu in self.cpu: |
| # create the interrupt controller CPU and connect to the membus |
| cpu.createInterruptController() |
| |
| # For x86 only, connect interrupts to the memory |
| # Note: these are directly connected to the memory bus and |
| # not cached |
| cpu.interrupts[0].pio = self.membus.mem_side_ports |
| cpu.interrupts[0].int_requestor = self.membus.cpu_side_ports |
| cpu.interrupts[0].int_responder = self.membus.mem_side_ports |
| |
| # Memory latency: Using the smaller number from [3]: 96ns |
| def createMemoryControllersDDR4(self): |
| self._createMemoryControllers(8, DDR4_2400_16x4) |
| |
| def _createMemoryControllers(self, num, cls): |
| kernel_controller = self._createKernelMemoryController(cls) |
| |
| ranges = self._getInterleaveRanges(self.mem_ranges[-1], num, 7, 20) |
| self.mem_cntrls = [ |
| MemCtrl(dram = cls(range = ranges[i]), |
| port = self.membus.mem_side_ports) |
| for i in range(num) |
| ] + [kernel_controller] |
| |
| def _createKernelMemoryController(self, cls): |
| return MemCtrl(dram = cls(range = self.mem_ranges[0]), |
| port = self.membus.mem_side_ports) |
| |
| def _getInterleaveRanges(self, rng, num, intlv_low_bit, xor_low_bit): |
| from math import log |
| bits = int(log(num, 2)) |
| if 2**bits != num: |
| m5.fatal("Non-power of two number of memory controllers") |
| |
| intlv_bits = bits |
| ranges = [ |
| AddrRange(start=rng.start, |
| end=rng.end, |
| intlvHighBit = intlv_low_bit + intlv_bits - 1, |
| xorHighBit = xor_low_bit + intlv_bits - 1, |
| intlvBits = intlv_bits, |
| intlvMatch = i) |
| for i in range(num) |
| ] |
| |
| return ranges |
| |
| def initFS(self, membus, cpus): |
| self.pc = Pc() |
| self.workload = X86FsLinux() |
| # Constants similar to x86_traits.hh |
| IO_address_space_base = 0x8000000000000000 |
| pci_config_address_space_base = 0xc000000000000000 |
| interrupts_address_space_base = 0xa000000000000000 |
| APIC_range_size = 1 << 12 |
| |
| # North Bridge |
| self.iobus = IOXBar() |
| self.bridge = Bridge(delay='50ns') |
| self.bridge.mem_side_port = self.iobus.cpu_side_ports |
| self.bridge.cpu_side_port = membus.mem_side_ports |
| # Allow the bridge to pass through: |
| # 1) kernel configured PCI device memory map address: address range |
| # [0xC0000000, 0xFFFF0000). (The upper 64kB are reserved for m5ops.) |
| # 2) the bridge to pass through the IO APIC (two pages, already |
| # contained in 1), |
| # 3) everything in the IO address range up to the local APIC, and |
| # 4) then the entire PCI address space and beyond. |
| self.bridge.ranges = \ |
| [ |
| AddrRange(0xC0000000, 0xFFFF0000), |
| AddrRange(IO_address_space_base, |
| interrupts_address_space_base - 1), |
| AddrRange(pci_config_address_space_base, |
| Addr.max) |
| ] |
| |
| # Create a bridge from the IO bus to the memory bus to allow access |
| # to the local APIC (two pages) |
| self.apicbridge = Bridge(delay='50ns') |
| self.apicbridge.cpu_side_port = self.iobus.mem_side_ports |
| self.apicbridge.mem_side_port = membus.cpu_side_ports |
| self.apicbridge.ranges = [AddrRange(interrupts_address_space_base, |
| interrupts_address_space_base + |
| cpus * APIC_range_size |
| - 1)] |
| |
| # connect the io bus |
| self.pc.attachIO(self.iobus) |
| |
| # Add a tiny cache to the IO bus. |
| # This cache is required for the classic memory model for coherence |
| self.iocache = Cache(assoc=8, |
| tag_latency = 50, |
| data_latency = 50, |
| response_latency = 50, |
| mshrs = 20, |
| size = '1kB', |
| tgts_per_mshr = 12, |
| addr_ranges = self.mem_ranges) |
| self.iocache.cpu_side = self.iobus.mem_side_ports |
| self.iocache.mem_side = self.membus.cpu_side_ports |
| |
| self.intrctrl = IntrControl() |
| |
| ############################################### |
| |
| # Add in a Bios information structure. |
| self.workload.smbios_table.structures = [X86SMBiosBiosInformation()] |
| |
| # Set up the Intel MP table |
| base_entries = [] |
| ext_entries = [] |
| for i in range(cpus): |
| bp = X86IntelMPProcessor( |
| local_apic_id = i, |
| local_apic_version = 0x14, |
| enable = True, |
| bootstrap = (i ==0)) |
| base_entries.append(bp) |
| io_apic = X86IntelMPIOAPIC( |
| id = cpus, |
| version = 0x11, |
| enable = True, |
| address = 0xfec00000) |
| self.pc.south_bridge.io_apic.apic_id = io_apic.id |
| base_entries.append(io_apic) |
| pci_bus = X86IntelMPBus(bus_id = 0, bus_type='PCI ') |
| base_entries.append(pci_bus) |
| isa_bus = X86IntelMPBus(bus_id = 1, bus_type='ISA ') |
| base_entries.append(isa_bus) |
| connect_busses = X86IntelMPBusHierarchy(bus_id=1, |
| subtractive_decode=True, parent_bus=0) |
| ext_entries.append(connect_busses) |
| pci_dev4_inta = X86IntelMPIOIntAssignment( |
| interrupt_type = 'INT', |
| polarity = 'ConformPolarity', |
| trigger = 'ConformTrigger', |
| source_bus_id = 0, |
| source_bus_irq = 0 + (4 << 2), |
| dest_io_apic_id = io_apic.id, |
| dest_io_apic_intin = 16) |
| base_entries.append(pci_dev4_inta) |
| def assignISAInt(irq, apicPin): |
| assign_8259_to_apic = X86IntelMPIOIntAssignment( |
| interrupt_type = 'ExtInt', |
| polarity = 'ConformPolarity', |
| trigger = 'ConformTrigger', |
| source_bus_id = 1, |
| source_bus_irq = irq, |
| dest_io_apic_id = io_apic.id, |
| dest_io_apic_intin = 0) |
| base_entries.append(assign_8259_to_apic) |
| assign_to_apic = X86IntelMPIOIntAssignment( |
| interrupt_type = 'INT', |
| polarity = 'ConformPolarity', |
| trigger = 'ConformTrigger', |
| source_bus_id = 1, |
| source_bus_irq = irq, |
| dest_io_apic_id = io_apic.id, |
| dest_io_apic_intin = apicPin) |
| base_entries.append(assign_to_apic) |
| assignISAInt(0, 2) |
| assignISAInt(1, 1) |
| for i in range(3, 15): |
| assignISAInt(i, i) |
| self.workload.intel_mp_table.base_entries = base_entries |
| self.workload.intel_mp_table.ext_entries = ext_entries |
| |
| entries = \ |
| [ |
| # Mark the first megabyte of memory as reserved |
| X86E820Entry(addr = 0, size = '639kB', range_type = 1), |
| X86E820Entry(addr = 0x9fc00, size = '385kB', range_type = 2), |
| # Mark the rest of physical memory as available |
| X86E820Entry(addr = 0x100000, |
| size = '%dB' % (self.mem_ranges[0].size() - 0x100000), |
| range_type = 1), |
| ] |
| # Mark [mem_size, 3GB) as reserved if memory less than 3GB, which |
| # force IO devices to be mapped to [0xC0000000, 0xFFFF0000). Requests |
| # to this specific range can pass though bridge to iobus. |
| entries.append(X86E820Entry(addr = self.mem_ranges[0].size(), |
| size='%dB' % (0xC0000000 - self.mem_ranges[0].size()), |
| range_type=2)) |
| |
| # Reserve the last 16kB of the 32-bit address space for m5ops |
| entries.append(X86E820Entry(addr = 0xFFFF0000, size = '64kB', |
| range_type=2)) |
| |
| # Add the rest of memory. This is where all the actual data is |
| entries.append(X86E820Entry(addr = self.mem_ranges[-1].start, |
| size='%dB' % (self.mem_ranges[-1].size()), |
| range_type=1)) |
| |
| self.workload.e820_table.entries = entries |
