| /* integration/qawo.c |
| * |
| * Copyright (C) 1996, 1997, 1998, 1999, 2000 Brian Gough |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or (at |
| * your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, but |
| * WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU |
| * General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. |
| */ |
| |
| #include <config.h> |
| #include <math.h> |
| #include <float.h> |
| #include <gsl/gsl_math.h> |
| #include <gsl/gsl_errno.h> |
| #include <gsl/gsl_integration.h> |
| |
| #include "initialise.c" |
| #include "set_initial.c" |
| #include "reset.c" |
| #include "qpsrt.c" |
| #include "util.c" |
| #include "qpsrt2.c" |
| #include "qelg.c" |
| #include "positivity.c" |
| |
| #include "qc25f.c" |
| |
| int |
| gsl_integration_qawo (gsl_function * f, |
| const double a, |
| const double epsabs, const double epsrel, |
| const size_t limit, |
| gsl_integration_workspace * workspace, |
| gsl_integration_qawo_table * wf, |
| double *result, double *abserr) |
| { |
| double area, errsum; |
| double res_ext, err_ext; |
| double result0, abserr0, resabs0, resasc0; |
| double tolerance; |
| |
| double ertest = 0; |
| double error_over_large_intervals = 0; |
| double reseps = 0, abseps = 0, correc = 0; |
| size_t ktmin = 0; |
| int roundoff_type1 = 0, roundoff_type2 = 0, roundoff_type3 = 0; |
| int error_type = 0, error_type2 = 0; |
| |
| size_t iteration = 0; |
| |
| int positive_integrand = 0; |
| int extrapolate = 0; |
| int extall = 0; |
| int disallow_extrapolation = 0; |
| |
| struct extrapolation_table table; |
| |
| double b = a + wf->L ; |
| double abs_omega = fabs (wf->omega) ; |
| |
| /* Initialize results */ |
| |
| initialise (workspace, a, b); |
| |
| *result = 0; |
| *abserr = 0; |
| |
| if (limit > workspace->limit) |
| { |
| GSL_ERROR ("iteration limit exceeds available workspace", GSL_EINVAL) ; |
| } |
| |
| /* Test on accuracy */ |
| |
| if (epsabs <= 0 && (epsrel < 50 * GSL_DBL_EPSILON || epsrel < 0.5e-28)) |
| { |
| GSL_ERROR ("tolerance cannot be acheived with given epsabs and epsrel", |
| GSL_EBADTOL); |
| } |
| |
| /* Perform the first integration */ |
| |
| qc25f (f, a, b, wf, 0, &result0, &abserr0, &resabs0, &resasc0); |
| |
| set_initial_result (workspace, result0, abserr0); |
| |
| tolerance = GSL_MAX_DBL (epsabs, epsrel * fabs (result0)); |
| |
| if (abserr0 <= 100 * GSL_DBL_EPSILON * resabs0 && abserr0 > tolerance) |
| { |
| *result = result0; |
| *abserr = abserr0; |
| |
| GSL_ERROR ("cannot reach tolerance because of roundoff error" |
| "on first attempt", GSL_EROUND); |
| } |
| else if ((abserr0 <= tolerance && abserr0 != resasc0) || abserr0 == 0.0) |
| { |
| *result = result0; |
| *abserr = abserr0; |
| |
| return GSL_SUCCESS; |
| } |
| else if (limit == 1) |
| { |
| *result = result0; |
| *abserr = abserr0; |
| |
| GSL_ERROR ("a maximum of one iteration was insufficient", GSL_EMAXITER); |
| } |
| |
| /* Initialization */ |
| |
| initialise_table (&table); |
| |
| if (0.5 * abs_omega * fabs(b - a) <= 2) |
| { |
| append_table (&table, result0); |
| extall = 1; |
| } |
| |
| area = result0; |
| errsum = abserr0; |
| |
| res_ext = result0; |
| err_ext = GSL_DBL_MAX; |
| |
| positive_integrand = test_positivity (result0, resabs0); |
| |
| iteration = 1; |
| |
| do |
| { |
| size_t current_level; |
| double a1, b1, a2, b2; |
| double a_i, b_i, r_i, e_i; |
| double area1 = 0, area2 = 0, area12 = 0; |
| double error1 = 0, error2 = 0, error12 = 0; |
| double resasc1, resasc2; |
| double resabs1, resabs2; |
| double last_e_i; |
| |
| /* Bisect the subinterval with the largest error estimate */ |
| |
| retrieve (workspace, &a_i, &b_i, &r_i, &e_i); |
| |
| current_level = workspace->level[workspace->i] + 1; |
| |
| if (current_level >= wf->n) |
| { |
| error_type = -1 ; /* exceeded limit of table */ |
| break ; |
| } |
| |
| a1 = a_i; |
| b1 = 0.5 * (a_i + b_i); |
| a2 = b1; |
| b2 = b_i; |
| |
| iteration++; |
| |
| qc25f (f, a1, b1, wf, current_level, &area1, &error1, &resabs1, &resasc1); |
| qc25f (f, a2, b2, wf, current_level, &area2, &error2, &resabs2, &resasc2); |
| |
| area12 = area1 + area2; |
| error12 = error1 + error2; |
| last_e_i = e_i; |
| |
| /* Improve previous approximations to the integral and test for |
| accuracy. |
| |
| We write these expressions in the same way as the original |
| QUADPACK code so that the rounding errors are the same, which |
| makes testing easier. */ |
| |
| errsum = errsum + error12 - e_i; |
| area = area + area12 - r_i; |
| |
| tolerance = GSL_MAX_DBL (epsabs, epsrel * fabs (area)); |
| |
| if (resasc1 != error1 && resasc2 != error2) |
| { |
| double delta = r_i - area12; |
| |
| if (fabs (delta) <= 1.0e-5 * fabs (area12) && error12 >= 0.99 * e_i) |
| { |
| if (!extrapolate) |
| { |
| roundoff_type1++; |
| } |
| else |
| { |
| roundoff_type2++; |
| } |
| } |
| if (iteration > 10 && error12 > e_i) |
| { |
| roundoff_type3++; |
| } |
| } |
| |
| /* Test for roundoff and eventually set error flag */ |
| |
| if (roundoff_type1 + roundoff_type2 >= 10 || roundoff_type3 >= 20) |
| { |
| error_type = 2; /* round off error */ |
| } |
| |
| if (roundoff_type2 >= 5) |
| { |
| error_type2 = 1; |
| } |
| |
| /* set error flag in the case of bad integrand behaviour at |
| a point of the integration range */ |
| |
| if (subinterval_too_small (a1, a2, b2)) |
| { |
| error_type = 4; |
| } |
| |
| /* append the newly-created intervals to the list */ |
| |
| update (workspace, a1, b1, area1, error1, a2, b2, area2, error2); |
| |
| if (errsum <= tolerance) |
| { |
| goto compute_result; |
| } |
| |
| if (error_type) |
| { |
| break; |
| } |
| |
| if (iteration >= limit - 1) |
| { |
| error_type = 1; |
| break; |
| } |
| |
| /* set up variables on first iteration */ |
| |
| if (iteration == 2 && extall) |
| { |
| error_over_large_intervals = errsum; |
| ertest = tolerance; |
| append_table (&table, area); |
| continue; |
| } |
| |
| if (disallow_extrapolation) |
| { |
| continue; |
| } |
| |
| if (extall) |
| { |
| error_over_large_intervals += -last_e_i; |
| |
| if (current_level < workspace->maximum_level) |
| { |
| error_over_large_intervals += error12; |
| } |
| |
| if (extrapolate) |
| goto label70; |
| } |
| |
| if (large_interval(workspace)) |
| { |
| continue; |
| } |
| |
| if (extall) |
| { |
| extrapolate = 1; |
| workspace->nrmax = 1; |
| } |
| else |
| { |
| /* test whether the interval to be bisected next is the |
| smallest interval. */ |
| size_t i = workspace->i; |
| double width = workspace->blist[i] - workspace->alist[i]; |
| |
| if (0.25 * fabs(width) * abs_omega > 2) |
| continue; |
| |
| extall = 1; |
| error_over_large_intervals = errsum; |
| ertest = tolerance; |
| continue; |
| } |
| |
| label70: |
| if (!error_type2 && error_over_large_intervals > ertest) |
| { |
| if (increase_nrmax (workspace)) |
| continue; |
| } |
| |
| /* Perform extrapolation */ |
| |
| append_table (&table, area); |
| |
| if (table.n < 3) |
| { |
| reset_nrmax(workspace); |
| extrapolate = 0; |
| error_over_large_intervals = errsum; |
| continue; |
| } |
| |
| qelg (&table, &reseps, &abseps); |
| |
| ktmin++; |
| |
| if (ktmin > 5 && err_ext < 0.001 * errsum) |
| { |
| error_type = 5; |
| } |
| |
| if (abseps < err_ext) |
| { |
| ktmin = 0; |
| err_ext = abseps; |
| res_ext = reseps; |
| correc = error_over_large_intervals; |
| ertest = GSL_MAX_DBL (epsabs, epsrel * fabs (reseps)); |
| if (err_ext <= ertest) |
| break; |
| } |
| |
| /* Prepare bisection of the smallest interval. */ |
| |
| if (table.n == 1) |
| { |
| disallow_extrapolation = 1; |
| } |
| |
| if (error_type == 5) |
| { |
| break; |
| } |
| |
| /* work on interval with largest error */ |
| |
| reset_nrmax (workspace); |
| extrapolate = 0; |
| error_over_large_intervals = errsum; |
| |
| } |
| while (iteration < limit); |
| |
| *result = res_ext; |
| *abserr = err_ext; |
| |
| if (err_ext == GSL_DBL_MAX) |
| goto compute_result; |
| |
| if (error_type || error_type2) |
| { |
| if (error_type2) |
| { |
| err_ext += correc; |
| } |
| |
| if (error_type == 0) |
| error_type = 3; |
| |
| if (result != 0 && area != 0) |
| { |
| if (err_ext / fabs (res_ext) > errsum / fabs (area)) |
| goto compute_result; |
| } |
| else if (err_ext > errsum) |
| { |
| goto compute_result; |
| } |
| else if (area == 0.0) |
| { |
| goto return_error; |
| } |
| } |
| |
| /* Test on divergence. */ |
| |
| { |
| double max_area = GSL_MAX_DBL (fabs (res_ext), fabs (area)); |
| |
| if (!positive_integrand && max_area < 0.01 * resabs0) |
| goto return_error; |
| } |
| |
| { |
| double ratio = res_ext / area; |
| |
| if (ratio < 0.01 || ratio > 100 || errsum > fabs (area)) |
| error_type = 6; |
| } |
| |
| goto return_error; |
| |
| compute_result: |
| |
| *result = sum_results (workspace); |
| *abserr = errsum; |
| |
| return_error: |
| |
| if (error_type > 2) |
| error_type--; |
| |
| if (error_type == 0) |
| { |
| return GSL_SUCCESS; |
| } |
| else if (error_type == 1) |
| { |
| GSL_ERROR ("number of iterations was insufficient", GSL_EMAXITER); |
| } |
| else if (error_type == 2) |
| { |
| GSL_ERROR ("cannot reach tolerance because of roundoff error", |
| GSL_EROUND); |
| } |
| else if (error_type == 3) |
| { |
| GSL_ERROR ("bad integrand behavior found in the integration interval", |
| GSL_ESING); |
| } |
| else if (error_type == 4) |
| { |
| GSL_ERROR ("roundoff error detected in extrapolation table", GSL_EROUND); |
| } |
| else if (error_type == 5) |
| { |
| GSL_ERROR ("integral is divergent, or slowly convergent", GSL_EDIVERGE); |
| } |
| else if (error_type == -1) |
| { |
| GSL_ERROR ("exceeded limit of trigonometric table", GSL_ETABLE); |
| } |
| else |
| { |
| GSL_ERROR ("could not integrate function", GSL_EFAILED); |
| } |
| |
| } |