src/parsec/disk-image/parsec/parsec-benchmark/pkgs/libs/gsl/src/specfunc/erfc.c

/* specfunc/erfc.c
 * 
 * Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003 Gerard Jungman
 * 
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation; either version 2 of the License, or (at
 * your option) any later version.
 * 
 * This program is distributed in the hope that it will be useful, but
 * WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
 * General Public License for more details.
 * 
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
 */

/* Author:  J. Theiler (modifications by G. Jungman) */

/*
 * See Hart et al, Computer Approximations, John Wiley and Sons, New York (1968)
 * (This applies only to the erfc8 stuff, which is the part
 *  of the original code that survives. I have replaced much of
 *  the other stuff with Chebyshev fits. These are simpler and
 *  more precise than the original approximations. [GJ])
 */
#include <config.h>
#include <gsl/gsl_math.h>
#include <gsl/gsl_errno.h>
#include <gsl/gsl_sf_exp.h>
#include <gsl/gsl_sf_erf.h>

#include "check.h"

#include "chebyshev.h"
#include "cheb_eval.c"

#define LogRootPi_  0.57236494292470008706


static double erfc8_sum(double x)
{
  /* estimates erfc(x) valid for 8 < x < 100 */
  /* This is based on index 5725 in Hart et al */

  static double P[] = {
      2.97886562639399288862,
      7.409740605964741794425,
      6.1602098531096305440906,
      5.019049726784267463450058,
      1.275366644729965952479585264,
      0.5641895835477550741253201704
  };
  static double Q[] = {
      3.3690752069827527677,
      9.608965327192787870698,
      17.08144074746600431571095,
      12.0489519278551290360340491,
      9.396034016235054150430579648,
      2.260528520767326969591866945,
      1.0
  };
  double num=0.0, den=0.0;
  int i;

  num = P[5];
  for (i=4; i>=0; --i) {
      num = x*num + P[i];
  }
  den = Q[6];
  for (i=5; i>=0; --i) {
      den = x*den + Q[i];
  }

  return num/den;
}

inline
static double erfc8(double x)
{
  double e;
  e = erfc8_sum(x);
  e *= exp(-x*x);
  return e;
}

inline
static double log_erfc8(double x)
{
  double e;
  e = erfc8_sum(x);
  e = log(e) - x*x;
  return e;
}

#if 0
/* Abramowitz+Stegun, 7.2.14 */
static double erfcasympsum(double x)
{
  int i;
  double e = 1.;
  double coef = 1.;
  for (i=1; i<5; ++i) {
    /* coef *= -(2*i-1)/(2*x*x); ??? [GJ] */
    coef *= -(2*i+1)/(i*(4*x*x*x*x));
    e += coef;
    /*
    if (fabs(coef) < 1.0e-15) break;
    if (fabs(coef) > 1.0e10) break;
    
    [GJ]: These tests are not useful. This function is only
    used below. Took them out; they gum up the pipeline.
    */
  }
  return e;
}
#endif /* 0 */


/* Abramowitz+Stegun, 7.1.5 */
static int erfseries(double x, gsl_sf_result * result)
{
  double coef = x;
  double e    = coef;
  double del;
  int k;
  for (k=1; k<30; ++k) {
    coef *= -x*x/k;
    del   = coef/(2.0*k+1.0);
    e += del;
  }
  result->val = 2.0 / M_SQRTPI * e;
  result->err = 2.0 / M_SQRTPI * (fabs(del) + GSL_DBL_EPSILON);
  return GSL_SUCCESS;
}


/* Chebyshev fit for erfc((t+1)/2), -1 < t < 1
 */
static double erfc_xlt1_data[20] = {
  1.06073416421769980345174155056,
 -0.42582445804381043569204735291,
  0.04955262679620434040357683080,
  0.00449293488768382749558001242,
 -0.00129194104658496953494224761,
 -0.00001836389292149396270416979,
  0.00002211114704099526291538556,
 -5.23337485234257134673693179020e-7,
 -2.78184788833537885382530989578e-7,
  1.41158092748813114560316684249e-8,
  2.72571296330561699984539141865e-9,
 -2.06343904872070629406401492476e-10,
 -2.14273991996785367924201401812e-11,
  2.22990255539358204580285098119e-12,
  1.36250074650698280575807934155e-13,
 -1.95144010922293091898995913038e-14,
 -6.85627169231704599442806370690e-16,
  1.44506492869699938239521607493e-16,
  2.45935306460536488037576200030e-18,
 -9.29599561220523396007359328540e-19
};
static cheb_series erfc_xlt1_cs = {
  erfc_xlt1_data,
  19,
  -1, 1,
  12
};

/* Chebyshev fit for erfc(x) exp(x^2), 1 < x < 5, x = 2t + 3, -1 < t < 1
 */
static double erfc_x15_data[25] = {
  0.44045832024338111077637466616,
 -0.143958836762168335790826895326,
  0.044786499817939267247056666937,
 -0.013343124200271211203618353102,
  0.003824682739750469767692372556,
 -0.001058699227195126547306482530,
  0.000283859419210073742736310108,
 -0.000073906170662206760483959432,
  0.000018725312521489179015872934,
 -4.62530981164919445131297264430e-6,
  1.11558657244432857487884006422e-6,
 -2.63098662650834130067808832725e-7,
  6.07462122724551777372119408710e-8,
 -1.37460865539865444777251011793e-8,
  3.05157051905475145520096717210e-9,
 -6.65174789720310713757307724790e-10,
  1.42483346273207784489792999706e-10,
 -3.00141127395323902092018744545e-11,
  6.22171792645348091472914001250e-12,
 -1.26994639225668496876152836555e-12,
  2.55385883033257575402681845385e-13,
 -5.06258237507038698392265499770e-14,
  9.89705409478327321641264227110e-15,
 -1.90685978789192181051961024995e-15,
  3.50826648032737849245113757340e-16
};
static cheb_series erfc_x15_cs = {
  erfc_x15_data,
  24,
  -1, 1,
  16
};

/* Chebyshev fit for erfc(x) x exp(x^2), 5 < x < 10, x = (5t + 15)/2, -1 < t < 1
 */
static double erfc_x510_data[20] = {
  1.11684990123545698684297865808,
  0.003736240359381998520654927536,
 -0.000916623948045470238763619870,
  0.000199094325044940833965078819,
 -0.000040276384918650072591781859,
  7.76515264697061049477127605790e-6,
 -1.44464794206689070402099225301e-6,
  2.61311930343463958393485241947e-7,
 -4.61833026634844152345304095560e-8,
  8.00253111512943601598732144340e-9,
 -1.36291114862793031395712122089e-9,
  2.28570483090160869607683087722e-10,
 -3.78022521563251805044056974560e-11,
  6.17253683874528285729910462130e-12,
 -9.96019290955316888445830597430e-13,
  1.58953143706980770269506726000e-13,
 -2.51045971047162509999527428316e-14,
  3.92607828989125810013581287560e-15,
 -6.07970619384160374392535453420e-16,
  9.12600607264794717315507477670e-17
};
static cheb_series erfc_x510_cs = {
  erfc_x510_data,
  19,
  -1, 1,
  12
};

#if 0
inline
static double
erfc_asymptotic(double x)
{
  return exp(-x*x)/x * erfcasympsum(x) / M_SQRTPI;
}
inline
static double
log_erfc_asymptotic(double x)
{
  return log(erfcasympsum(x)/x) - x*x - LogRootPi_;
}
#endif /* 0 */


/*-*-*-*-*-*-*-*-*-*-*-* Functions with Error Codes *-*-*-*-*-*-*-*-*-*-*-*/

int gsl_sf_erfc_e(double x, gsl_sf_result * result)
{
  const double ax = fabs(x);
  double e_val, e_err;

  /* CHECK_POINTER(result) */

  if(ax <= 1.0) {
    double t = 2.0*ax - 1.0;
    gsl_sf_result c;
    cheb_eval_e(&erfc_xlt1_cs, t, &c);
    e_val = c.val;
    e_err = c.err;
  }
  else if(ax <= 5.0) {
    double ex2 = exp(-x*x);
    double t = 0.5*(ax-3.0);
    gsl_sf_result c;
    cheb_eval_e(&erfc_x15_cs, t, &c);
    e_val = ex2 * c.val;
    e_err = ex2 * (c.err + 2.0*fabs(x)*GSL_DBL_EPSILON);
  }
  else if(ax < 10.0) {
    double exterm = exp(-x*x) / ax;
    double t = (2.0*ax - 15.0)/5.0;
    gsl_sf_result c;
    cheb_eval_e(&erfc_x510_cs, t, &c);
    e_val = exterm * c.val;
    e_err = exterm * (c.err + 2.0*fabs(x)*GSL_DBL_EPSILON + GSL_DBL_EPSILON);
  }
  else {
    e_val = erfc8(ax);
    e_err = (x*x + 1.0) * GSL_DBL_EPSILON * fabs(e_val);
  }

  if(x < 0.0) {
    result->val  = 2.0 - e_val;
    result->err  = e_err;
    result->err += 2.0 * GSL_DBL_EPSILON * fabs(result->val);
  }
  else {
    result->val  = e_val;
    result->err  = e_err;
    result->err += 2.0 * GSL_DBL_EPSILON * fabs(result->val);
  }

  return GSL_SUCCESS;
}


int gsl_sf_log_erfc_e(double x, gsl_sf_result * result)
{
  /* CHECK_POINTER(result) */

  if(x*x < 10.0*GSL_ROOT6_DBL_EPSILON) {
    const double y = x / M_SQRTPI;
    /* series for -1/2 Log[Erfc[Sqrt[Pi] y]] */
    const double c3 = (4.0 - M_PI)/3.0;
    const double c4 = 2.0*(1.0 - M_PI/3.0);
    const double c5 = -0.001829764677455021;  /* (96.0 - 40.0*M_PI + 3.0*M_PI*M_PI)/30.0  */
    const double c6 =  0.02629651521057465;   /* 2.0*(120.0 - 60.0*M_PI + 7.0*M_PI*M_PI)/45.0 */
    const double c7 = -0.01621575378835404;
    const double c8 =  0.00125993961762116;
    const double c9 =  0.00556964649138;
    const double c10 = -0.0045563339802;
    const double c11 =  0.0009461589032;
    const double c12 =  0.0013200243174;
    const double c13 = -0.00142906;
    const double c14 =  0.00048204;
    double series = c8 + y*(c9 + y*(c10 + y*(c11 + y*(c12 + y*(c13 + c14*y)))));
    series = y*(1.0 + y*(1.0 + y*(c3 + y*(c4 + y*(c5 + y*(c6 + y*(c7 + y*series)))))));
    result->val = -2.0 * series;
    result->err = 2.0 * GSL_DBL_EPSILON * fabs(result->val);
    return GSL_SUCCESS;
  }
  /*
  don't like use of log1p(); added above series stuff for small x instead, should be ok [GJ]
  else if (fabs(x) < 1.0) {
    gsl_sf_result result_erf;
    gsl_sf_erf_e(x, &result_erf);
    result->val  = log1p(-result_erf.val);
    result->err = 2.0 * GSL_DBL_EPSILON * fabs(result->val);
    return GSL_SUCCESS;
  }
  */
  else if(x > 8.0) {
    result->val = log_erfc8(x);
    result->err = 2.0 * GSL_DBL_EPSILON * fabs(result->val);
    return GSL_SUCCESS;
  }
  else {
    gsl_sf_result result_erfc;
    gsl_sf_erfc_e(x, &result_erfc);
    result->val  = log(result_erfc.val);
    result->err  = fabs(result_erfc.err / result_erfc.val);
    result->err += 2.0 * GSL_DBL_EPSILON * fabs(result->val);
    return GSL_SUCCESS;
  }
}


int gsl_sf_erf_e(double x, gsl_sf_result * result)
{
  /* CHECK_POINTER(result) */

  if(fabs(x) < 1.0) {
    return erfseries(x, result);
  }
  else {
    gsl_sf_result result_erfc;
    gsl_sf_erfc_e(x, &result_erfc);
    result->val  = 1.0 - result_erfc.val;
    result->err  = result_erfc.err;
    result->err += 2.0 * GSL_DBL_EPSILON * fabs(result->val);
    return GSL_SUCCESS;
  }
}


int gsl_sf_erf_Z_e(double x, gsl_sf_result * result)
{
  /* CHECK_POINTER(result) */

  {
    const double ex2 = exp(-x*x/2.0);
    result->val  = ex2 / (M_SQRT2 * M_SQRTPI);
    result->err  = fabs(x * result->val) * GSL_DBL_EPSILON;
    result->err += 2.0 * GSL_DBL_EPSILON * fabs(result->val);
    CHECK_UNDERFLOW(result);
    return GSL_SUCCESS;
  }
}


int gsl_sf_erf_Q_e(double x, gsl_sf_result * result)
{
  /* CHECK_POINTER(result) */

  {
    gsl_sf_result result_erfc;
    int stat = gsl_sf_erfc_e(x/M_SQRT2, &result_erfc);
    result->val  = 0.5 * result_erfc.val;
    result->err  = 0.5 * result_erfc.err;
    result->err += 2.0 * GSL_DBL_EPSILON * fabs(result->val);
    return stat;
  }
}


int gsl_sf_hazard_e(double x, gsl_sf_result * result)
{
  if(x < 25.0)
  {
    gsl_sf_result result_ln_erfc;
    const int stat_l = gsl_sf_log_erfc_e(x/M_SQRT2, &result_ln_erfc);
    const double lnc = -0.22579135264472743236; /* ln(sqrt(2/pi)) */
    const double arg = lnc - 0.5*x*x - result_ln_erfc.val;
    const int stat_e = gsl_sf_exp_e(arg, result);
    result->err += 3.0 * (1.0 + fabs(x)) * GSL_DBL_EPSILON * fabs(result->val);
    result->err += fabs(result_ln_erfc.err * result->val);
    return GSL_ERROR_SELECT_2(stat_l, stat_e);
  }
  else
  {
    const double ix2 = 1.0/(x*x);
    const double corrB = 1.0 - 9.0*ix2 * (1.0 - 11.0*ix2);
    const double corrM = 1.0 - 5.0*ix2 * (1.0 - 7.0*ix2 * corrB);
    const double corrT = 1.0 - ix2 * (1.0 - 3.0*ix2*corrM);
    result->val = x / corrT;
    result->err = 2.0 * GSL_DBL_EPSILON * fabs(result->val);
    return GSL_SUCCESS;
  }
}



/*-*-*-*-*-*-*-*-*-* Functions w/ Natural Prototypes *-*-*-*-*-*-*-*-*-*-*/

#include "eval.h"

double gsl_sf_erfc(double x)
{
  EVAL_RESULT(gsl_sf_erfc_e(x, &result));
}

double gsl_sf_log_erfc(double x)
{
  EVAL_RESULT(gsl_sf_log_erfc_e(x, &result));
}

double gsl_sf_erf(double x)
{
  EVAL_RESULT(gsl_sf_erf_e(x, &result));
}

double gsl_sf_erf_Z(double x)
{
  EVAL_RESULT(gsl_sf_erf_Z_e(x, &result));
}

double gsl_sf_erf_Q(double x)
{
  EVAL_RESULT(gsl_sf_erf_Q_e(x, &result));
}

double gsl_sf_hazard(double x)
{
  EVAL_RESULT(gsl_sf_hazard_e(x, &result));
}