| /* |
| Copyright (C) Intel Corp. 2006. All Rights Reserved. |
| Intel funded Tungsten Graphics (http://www.tungstengraphics.com) to |
| develop this 3D driver. |
| |
| Permission is hereby granted, free of charge, to any person obtaining |
| a copy of this software and associated documentation files (the |
| "Software"), to deal in the Software without restriction, including |
| without limitation the rights to use, copy, modify, merge, publish, |
| distribute, sublicense, and/or sell copies of the Software, and to |
| permit persons to whom the Software is furnished to do so, subject to |
| the following conditions: |
| |
| The above copyright notice and this permission notice (including the |
| next paragraph) shall be included in all copies or substantial |
| portions of the Software. |
| |
| THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, |
| EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF |
| MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. |
| IN NO EVENT SHALL THE COPYRIGHT OWNER(S) AND/OR ITS SUPPLIERS BE |
| LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION |
| OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION |
| WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. |
| |
| **********************************************************************/ |
| /* |
| * Authors: |
| * Keith Whitwell <keith@tungstengraphics.com> |
| */ |
| |
| |
| #include "brw_context.h" |
| #include "brw_state.h" |
| #include "brw_defines.h" |
| |
| #include "macros.h" |
| |
| |
| |
| /* Samplers aren't strictly wm state from the hardware's perspective, |
| * but that is the only situation in which we use them in this driver. |
| */ |
| |
| |
| |
| /* The brw (and related graphics cores) do not support GL_CLAMP. The |
| * Intel drivers for "other operating systems" implement GL_CLAMP as |
| * GL_CLAMP_TO_EDGE, so the same is done here. |
| */ |
| static GLuint translate_wrap_mode( GLenum wrap ) |
| { |
| switch( wrap ) { |
| case GL_REPEAT: |
| return BRW_TEXCOORDMODE_WRAP; |
| case GL_CLAMP: |
| return BRW_TEXCOORDMODE_CLAMP; |
| case GL_CLAMP_TO_EDGE: |
| return BRW_TEXCOORDMODE_CLAMP; /* conform likes it this way */ |
| case GL_CLAMP_TO_BORDER: |
| return BRW_TEXCOORDMODE_CLAMP_BORDER; |
| case GL_MIRRORED_REPEAT: |
| return BRW_TEXCOORDMODE_MIRROR; |
| default: |
| return BRW_TEXCOORDMODE_WRAP; |
| } |
| } |
| |
| |
| static GLuint U_FIXED(GLfloat value, GLuint frac_bits) |
| { |
| value *= (1<<frac_bits); |
| return value < 0 ? 0 : value; |
| } |
| |
| static GLint S_FIXED(GLfloat value, GLuint frac_bits) |
| { |
| return value * (1<<frac_bits); |
| } |
| |
| |
| static dri_bo *upload_default_color( struct brw_context *brw, |
| const GLfloat *color ) |
| { |
| struct brw_sampler_default_color sdc; |
| |
| COPY_4V(sdc.color, color); |
| |
| return brw_cache_data( &brw->cache, BRW_SAMPLER_DEFAULT_COLOR, &sdc, |
| NULL, 0 ); |
| } |
| |
| |
| struct wm_sampler_key { |
| int sampler_count; |
| |
| struct wm_sampler_entry { |
| GLenum wrap_r, wrap_s, wrap_t; |
| float maxlod, minlod; |
| float lod_bias; |
| float max_aniso; |
| GLenum minfilter, magfilter; |
| GLenum comparemode, comparefunc; |
| dri_bo *sdc_bo; |
| } sampler[BRW_MAX_TEX_UNIT]; |
| }; |
| |
| /** |
| * Sets the sampler state for a single unit based off of the sampler key |
| * entry. |
| */ |
| static void brw_update_sampler_state(struct wm_sampler_entry *key, |
| dri_bo *sdc_bo, |
| struct brw_sampler_state *sampler) |
| { |
| _mesa_memset(sampler, 0, sizeof(*sampler)); |
| |
| switch (key->minfilter) { |
| case GL_NEAREST: |
| sampler->ss0.min_filter = BRW_MAPFILTER_NEAREST; |
| sampler->ss0.mip_filter = BRW_MIPFILTER_NONE; |
| break; |
| case GL_LINEAR: |
| sampler->ss0.min_filter = BRW_MAPFILTER_LINEAR; |
| sampler->ss0.mip_filter = BRW_MIPFILTER_NONE; |
| break; |
| case GL_NEAREST_MIPMAP_NEAREST: |
| sampler->ss0.min_filter = BRW_MAPFILTER_NEAREST; |
| sampler->ss0.mip_filter = BRW_MIPFILTER_NEAREST; |
| break; |
| case GL_LINEAR_MIPMAP_NEAREST: |
| sampler->ss0.min_filter = BRW_MAPFILTER_LINEAR; |
| sampler->ss0.mip_filter = BRW_MIPFILTER_NEAREST; |
| break; |
| case GL_NEAREST_MIPMAP_LINEAR: |
| sampler->ss0.min_filter = BRW_MAPFILTER_NEAREST; |
| sampler->ss0.mip_filter = BRW_MIPFILTER_LINEAR; |
| break; |
| case GL_LINEAR_MIPMAP_LINEAR: |
| sampler->ss0.min_filter = BRW_MAPFILTER_LINEAR; |
| sampler->ss0.mip_filter = BRW_MIPFILTER_LINEAR; |
| break; |
| default: |
| break; |
| } |
| |
| /* Set Anisotropy: |
| */ |
| if (key->max_aniso > 1.0) { |
| sampler->ss0.min_filter = BRW_MAPFILTER_ANISOTROPIC; |
| sampler->ss0.mag_filter = BRW_MAPFILTER_ANISOTROPIC; |
| |
| if (key->max_aniso > 2.0) { |
| sampler->ss3.max_aniso = MAX2((key->max_aniso - 2) / 2, |
| BRW_ANISORATIO_16); |
| } |
| } |
| else { |
| switch (key->magfilter) { |
| case GL_NEAREST: |
| sampler->ss0.mag_filter = BRW_MAPFILTER_NEAREST; |
| break; |
| case GL_LINEAR: |
| sampler->ss0.mag_filter = BRW_MAPFILTER_LINEAR; |
| break; |
| default: |
| break; |
| } |
| } |
| |
| sampler->ss1.r_wrap_mode = translate_wrap_mode(key->wrap_r); |
| sampler->ss1.s_wrap_mode = translate_wrap_mode(key->wrap_s); |
| sampler->ss1.t_wrap_mode = translate_wrap_mode(key->wrap_t); |
| |
| /* Fulsim complains if I don't do this. Hardware doesn't mind: |
| */ |
| #if 0 |
| if (texObj->Target == GL_TEXTURE_CUBE_MAP_ARB) { |
| sampler->ss1.r_wrap_mode = BRW_TEXCOORDMODE_CUBE; |
| sampler->ss1.s_wrap_mode = BRW_TEXCOORDMODE_CUBE; |
| sampler->ss1.t_wrap_mode = BRW_TEXCOORDMODE_CUBE; |
| } |
| #endif |
| |
| /* Set shadow function: |
| */ |
| if (key->comparemode == GL_COMPARE_R_TO_TEXTURE_ARB) { |
| /* Shadowing is "enabled" by emitting a particular sampler |
| * message (sample_c). So need to recompile WM program when |
| * shadow comparison is enabled on each/any texture unit. |
| */ |
| sampler->ss0.shadow_function = |
| intel_translate_shadow_compare_func(key->comparefunc); |
| } |
| |
| /* Set LOD bias: |
| */ |
| sampler->ss0.lod_bias = S_FIXED(CLAMP(key->lod_bias, -16, 15), 6); |
| |
| sampler->ss0.lod_preclamp = 1; /* OpenGL mode */ |
| sampler->ss0.default_color_mode = 0; /* OpenGL/DX10 mode */ |
| |
| /* Set BaseMipLevel, MaxLOD, MinLOD: |
| * |
| * XXX: I don't think that using firstLevel, lastLevel works, |
| * because we always setup the surface state as if firstLevel == |
| * level zero. Probably have to subtract firstLevel from each of |
| * these: |
| */ |
| sampler->ss0.base_level = U_FIXED(0, 1); |
| |
| sampler->ss1.max_lod = U_FIXED(MIN2(MAX2(key->maxlod, 0), 13), 6); |
| sampler->ss1.min_lod = U_FIXED(MIN2(MAX2(key->minlod, 0), 13), 6); |
| |
| sampler->ss2.default_color_pointer = sdc_bo->offset >> 5; /* reloc */ |
| } |
| |
| /** Sets up the cache key for sampler state for all texture units */ |
| static void |
| brw_wm_sampler_populate_key(struct brw_context *brw, |
| struct wm_sampler_key *key) |
| { |
| int unit; |
| |
| memset(key, 0, sizeof(*key)); |
| |
| for (unit = 0; unit < BRW_MAX_TEX_UNIT; unit++) { |
| if (brw->attribs.Texture->Unit[unit]._ReallyEnabled) { |
| struct wm_sampler_entry *entry = &key->sampler[unit]; |
| struct gl_texture_unit *texUnit = &brw->attribs.Texture->Unit[unit]; |
| struct gl_texture_object *texObj = texUnit->_Current; |
| |
| entry->wrap_r = texObj->WrapR; |
| entry->wrap_s = texObj->WrapS; |
| entry->wrap_t = texObj->WrapT; |
| |
| entry->maxlod = texObj->MaxLod; |
| entry->minlod = texObj->MinLod; |
| entry->lod_bias = texUnit->LodBias + texObj->LodBias; |
| entry->max_aniso = texObj->MaxAnisotropy; |
| entry->minfilter = texObj->MinFilter; |
| entry->magfilter = texObj->MagFilter; |
| entry->comparemode = texObj->CompareMode; |
| entry->comparefunc = texObj->CompareFunc; |
| |
| dri_bo_unreference(brw->wm.sdc_bo[unit]); |
| brw->wm.sdc_bo[unit] = upload_default_color(brw, texObj->BorderColor); |
| |
| key->sampler_count = unit + 1; |
| } |
| } |
| } |
| |
| /* All samplers must be uploaded in a single contiguous array, which |
| * complicates various things. However, this is still too confusing - |
| * FIXME: simplify all the different new texture state flags. |
| */ |
| static int upload_wm_samplers( struct brw_context *brw ) |
| { |
| struct wm_sampler_key key; |
| int i; |
| int ret = 0; |
| |
| brw_wm_sampler_populate_key(brw, &key); |
| |
| if (brw->wm.sampler_count != key.sampler_count) { |
| brw->wm.sampler_count = key.sampler_count; |
| brw->state.dirty.cache |= CACHE_NEW_SAMPLER; |
| } |
| |
| dri_bo_unreference(brw->wm.sampler_bo); |
| brw->wm.sampler_bo = NULL; |
| if (brw->wm.sampler_count == 0) |
| return 0; |
| |
| brw->wm.sampler_bo = brw_search_cache(&brw->cache, BRW_SAMPLER, |
| &key, sizeof(key), |
| brw->wm.sdc_bo, key.sampler_count, |
| NULL); |
| |
| /* If we didnt find it in the cache, compute the state and put it in the |
| * cache. |
| */ |
| if (brw->wm.sampler_bo == NULL) { |
| struct brw_sampler_state sampler[BRW_MAX_TEX_UNIT]; |
| |
| memset(sampler, 0, sizeof(sampler)); |
| for (i = 0; i < key.sampler_count; i++) { |
| if (brw->wm.sdc_bo[i] == NULL) |
| continue; |
| |
| brw_update_sampler_state(&key.sampler[i], brw->wm.sdc_bo[i], |
| &sampler[i]); |
| } |
| |
| brw->wm.sampler_bo = brw_upload_cache(&brw->cache, BRW_SAMPLER, |
| &key, sizeof(key), |
| brw->wm.sdc_bo, key.sampler_count, |
| &sampler, sizeof(sampler), |
| NULL, NULL); |
| |
| /* Emit SDC relocations */ |
| for (i = 0; i < BRW_MAX_TEX_UNIT; i++) { |
| if (!brw->attribs.Texture->Unit[i]._ReallyEnabled) |
| continue; |
| |
| ret |= dri_bufmgr_check_aperture_space(brw->wm.sdc_bo[i]); |
| dri_emit_reloc(brw->wm.sampler_bo, |
| DRM_BO_FLAG_MEM_TT | DRM_BO_FLAG_READ, |
| 0, |
| i * sizeof(struct brw_sampler_state) + |
| offsetof(struct brw_sampler_state, ss2), |
| brw->wm.sdc_bo[i]); |
| } |
| } |
| |
| ret |= dri_bufmgr_check_aperture_space(brw->wm.sampler_bo); |
| return ret; |
| |
| } |
| |
| const struct brw_tracked_state brw_wm_samplers = { |
| .dirty = { |
| .mesa = _NEW_TEXTURE, |
| .brw = 0, |
| .cache = 0 |
| }, |
| .prepare = upload_wm_samplers, |
| }; |
| |
| |