| 2008-09-07 Gary V. Vaughan <gary@gnu.org> |
| |
| Fix typo in Makefile.maint. |
| * Makefile.maint (git-news): Renamed to check-news, since it |
| doesn't actually run git. Adjust all dependees. |
| |
| Run `git commit -a' when no files are passed. |
| * clcommit.m4sh (func_commit): Add -a argument if necessary. |
| |
| Prepare for next stable release. |
| * libltdl/Makefile.inc (LTDL_VERSION_INFO): Update. |
| * libltdl/m4/libtool.m4: Bump serial number to account for |
| changes since 2.2.4 release. |
| * INSTALL, config/config.guess, config/texinfo.tex: Updated |
| from canonical source. |
| * configure.ac (AM_INIT_AUTOMAKE): Specify dist-lzma, which |
| was introduced after automake-1.10 was released. |
| (abs_top_srcdir, abs_top_builddir): No need to substitute these |
| from configure anymore, since we require automake 1.10.1, which |
| does perform the substitutions properly. |
| (TIMESTAMP): Normal releases were displaying the long-form |
| timestamp. Fix to show the short release timestamp as per |
| alpha release numbers. |
| * NEWS: Update with missing entries from ChangeLog. |
| * HACKING (Release Procedure): We release lzma tarballs now |
| but no xdeltas. |
| * Makefile.maint: Updated to match Release Procedure |
| instructions in HACKING. |
| |
| Convert mailnotify headers to git. |
| * clcommit.m4sh: Improve mailnotify contents. |
| |
| Make ./commit useful again. |
| * clcommit.m4sh: Major overhaul and simplification for git. |
| |
| 2008-09-06 Gary V. Vaughan <gary@gnu.org> |
| |
| Fix 'DISTCHECK_CONFIGURE_FLAGS=--program-prefix=g' bug. |
| * tests/testsuite.at (_LIBTOOLIZE_TRANSFORM): Fix test failures |
| with --program-prefix, where the test case output contains the |
| transformed name somewhere other than the beginning of a line. |
| * libtoolize.m4sh (func_check_macros): Be sure to always use |
| the transformed name in output messages. |
| |
| 2008-09-04 Ralf Wildenhues <Ralf.Wildenhues@gmx.de> |
| |
| Do not remove .gcno files when linking. |
| * libltdl/config/ltmain.m4sh (func_mode_link): When removing |
| potential output files before linking, do not remove *.gcno |
| profile information GCC outputs next to object files in `.libs'. |
| Report by Vincent Torri. |
| |
| 2008-09-01 Peter O'Gorman <peter@pogma.com> |
| |
| Revert 75142db4f8afc65ba7aae0ed80ea0b35bd9cc382 (AIX libltdl |
| dlopen(NULL) |
| |
| * libltdl/m4/ltdl.m4: Remove LTDL_DLOPEN_SELF_WORKS define. |
| * libltdl/loaders/dlopen.c: Remove LTDL_DLOPEN_SELF_WORKS check. |
| * libltdl/m4/libtool.m4 [aix]: Set export_dynamic_flag_spec to |
| -Wl,-bexpall. This is a temporary workaround until a real fix |
| is implemented. |
| * NEWS: document it. |
| |
| 2008-08-26 Peter O'Gorman <peter@pogma.com> |
| |
| Allow for extensions other than .a for preloaded modules. |
| * libltdl/m4/ltdl.m4 (_LTDL_SETUP): Define LT_LIBEXT. |
| * libltdl/ltdl.c (lt_dladvise_preload): Use it. |
| Reported by Ralf Wildenhues. |
| |
| 2008-08-26 Peter O'Gorman <peter@pogma.com>, |
| Ralf Wildenhues <Ralf.Wildenhues@gmx.de> |
| |
| Remove unnecessary global argz functions. |
| * libltdl/argz.c (argz_add,argz_count): Remove. |
| * libltdl/argz_.h (argz_add,argz_count): Remove. |
| * NEWS: Announce it. |
| * tests/ltdl-api.at: Test so we don't repeat it. |
| * Makefile.am: Add new test. |
| |
| 2008-08-22 Ralf Wildenhues <Ralf.Wildenhues@gmx.de> |
| |
| Initial support for Lahey Fortran on GNU/Linux. |
| * libltdl/m4/libtool.m4 (_LT_COMPILER_PIC, _LT_LINKER_SHLIBS) |
| [linux] <lf95>: Add support for Lahey Fortran 8.1. |
| * NEWS, THANKS: Update. |
| Suggested by Craig Tierney. |
| |
| 2008-08-21 Sam Thursfield <ssssam@gmail.com> (tiny change) |
| |
| Avoid leading separator in PATH for DLL search. |
| * libltdl/config/ltmain.m4sh (func_mode_link) [cygwin, mingw] |
| [ pw32, os2, cegcc]: Fix dllsearchpath not to contain leading |
| separator. |
| * THANKS: Update. |
| |
| 2008-08-21 Ralf Wildenhues <Ralf.Wildenhues@gmx.de> |
| |
| * libltdl/config/ltmain.m4sh (func_mode_link): Quote $#. |
| |
| Disallow `-L path', do not misparse it silently. |
| * libltdl/config/ltmain.m4sh (func_mode_link): Diagnose `-L' |
| without argument, and `-L path', i.e., with a space. |
| * tests/fail.at (Failure tests): Test for these failures. |
| * THANKS: Update. |
| Report by Olaf Lenz. |
| |
| 2008-08-16 Ralf Wildenhues <Ralf.Wildenhues@gmx.de> |
| |
| Avoid test failure due to broken dlpreloading of shared library. |
| * tests/lt_dladvise.at (lt_dlopenadvise library loading): Drop |
| some newlines in AT_CHECK commands, for better 'testsuite -x' |
| output. Only create a static installable libpreload.la, to |
| avoid exposing the bug libtool currently has with preloading of |
| shared libraries. Add a note to revisit this later. |
| |
| 2008-08-12 Ralf Wildenhues <Ralf.Wildenhues@gmx.de> |
| |
| Parallel make testsuite fixes. |
| * tests/configure-iface.at (installable libltdl) |
| (--with-ltdl-include/lib, --with-included-ltdl): Add dlopened |
| libmodule.la to main_DEPENDENCIES. |
| * tests/old-m4-iface.at (AC_WITH_LTDL): Likewise, let ltdldemo |
| depend upon module.la and libltdl/libltdlc.la. |
| * tests/testsuite.at (LT_AT_MAKE): Invoke each target in turn, |
| default to 'all'. |
| * tests/early-libtool.at (config.lt): Define 'all' target. |
| |
| * HACKING: Update for git, fix some minor nits. |
| |
| 2008-08-11 Ralf Wildenhues <Ralf.Wildenhues@gmx.de> |
| |
| Remove use of exit in configure test sources. |
| * libltdl/m4/libtool.m4 (_LT_TRY_DLOPEN_SELF): Return from main, |
| to avoid using undeclared exit. |
| Report against OpenMPI from Coverity via Jeff Squyres. |
| |
| * tests/configure-iface.at (convenience libltdl): Ignore warning |
| from parallel make. |
| |
| 2008-08-07 DJ Delorie <dj@redhat.com> |
| |
| * libltdl/m4/libtool.m4 (_LT_SYS_DYNAMIC_LINKER) [tpf] |
| <library_names_spec>: Fix typo in variable name. |
| |
| 2008-08-06 Steve Ellcey <sje@cup.hp.com> |
| |
| Use -fPIC with GCC on HP-UX/ia64. |
| * libltdl/m4/libtool.m4 (_LT_COMPILER_PIC, _LT_LINKER_SHLIBS) |
| [ia64-*-hpux*]: Specify -fPIC when using GCC to build shared |
| libraries. |
| |
| 2008-08-01 Ralf Wildenhues <Ralf.Wildenhues@gmx.de> |
| |
| * NEWS: Minor fixups. |
| |
| 2008-08-01 Gary V. Vaughan <gary@gnu.org> |
| |
| Bring NEWS up to date. |
| * NEWS: Add missing summaries since 2.2.4 release. |
| |
| Implement lt_dlopening of only preloaded modules. |
| * libltdl/m4/ltdl.m4 (LTDL_INIT): Check for a libltdl that |
| provides lt_dladvise_preopen when deciding if installed libltdl |
| is 'new enough'. |
| * libltdl/libltdl/lt__private.h (lt__advise): Add a new |
| is_preload flag. |
| * libltdl/ltdl.c (lt_dladvise_preload): New api call to set it. |
| (try_dlopen): If it is set, and the search of preloaded modules |
| didn't return a match, don't bother searching the filesystem. |
| * libltdl/ltdl.h (lt_dladvise_preload): Declare it. |
| * doc/libtool.texi (Libltdl Interface): Document it. |
| * tests/lt_dladvise.at: Test it (and incidentally add some test |
| coverage for `libtool -dlpreopen'). |
| * NEWS: Announce it. |
| |
| 2008-08-01 Vincent Torri <doursse@users.sf.net> |
| |
| Add cegcc (Windows CE/PocketPC) support. |
| * libltdl/config/ltmain.m4sh: Add 'cegcc' case where needed. |
| * libltdl/m4/libtool.m4 (LT_CMD_MAX_LEN, LT_SYS_DLOPEN_SELF) |
| (_LT_SYS_DYNAMIC_LINKER, _LT_CHECK_MAGIC_METHOD) |
| (_LT_CMD_GLOBAL_SYMBOLS, _LT_COMPILER_PIC, _LT_LINKER_SHLIBS) |
| (_LT_LANG_CXX_CONFIG): Likewise. |
| * libltdl/m4/ltoptions.m4 (AC_LIBTOOL_DLOPEN): Likewise. |
| * NEWS: Update. |
| * THANKS: Update. |
| |
| 2008-07-31 Ralf Wildenhues <Ralf.Wildenhues@gmx.de> |
| |
| * libltdl/config/ltmain.m4sh (func_to_host_path): Fix sh.test |
| failure. |
| Report by Paolo Bonzini. |
| |
| 2008-07-31 Paolo Bonzini <bonzini@gnu.org> |
| |
| * ltmain.m4sh (func_emit_cwrapperexe_src): Factor |
| multiple closed braces into the next cat command. |
| |
| 2008-06-19 Ralf Wildenhues <Ralf.Wildenhues@gmx.de> |
| |
| * libltdl/m4/libtool.m4 (_LT_COMPILER_PIC) [linux] <icc, icpc>: |
| Use -fPIC, newer Intel compilers (icc 10, ifort 9) reject -KPIC. |
| * tests/localization.at: Skip test if the compiler fails merely |
| due to the locale setting. |
| * THANKS: Update. |
| Report by Vincent Lefevre. |
| |
| 2008-06-17 Ralf Wildenhues <Ralf.Wildenhues@gmx.de> |
| |
| * doc/libtool.texi (Linking executables, Static libraries) |
| (Modules for libltdl, Distributing libltdl): Remove TABs from |
| the manual. |
| |
| 2008-06-13 Peter O'Gorman <peter@pogma.com> |
| |
| Support ifort on darwin. |
| * libltdl/m4/libtool.m4 (_LT_DARWIN_LINKER_FEATURES): Build |
| shared libraries with ifort. |
| Reported by Christopher Hulbert. |
| |
| 2008-06-01 Charles Wilson <libtool@cwilson.fastmail.fm> |
| |
| [mingw] fix cross-compile-with-wine case |
| * libltdl/config/ltmain.m4sh (func_to_host_path) |
| [host=mingw, build!=mingw|cygwin]: check that winepath |
| stdout is non-empty and exit code is 0, instead of checking |
| stderr. |
| Reported by: Roumen Petrov |
| |
| 2006-06-01 Stas Maximov <smaximov@ieee.org> (tiny change) |
| |
| Check only regular files, not devices, for lalibs. |
| * libltdl/config/ltmain.m4sh (functions func_lalib_p) |
| (func_lalib_unsafe_p): Only read regular files and not device |
| files. Avoids blocking libtool executing gdb, when a |
| pseudo-terminal device /dev/pts/NN is given as one of the |
| arguments to gdb, as in: |
| libtool --mode=execute gdb -q -nw -i mi -tty /dev/pts/4 prog |
| |
| 2008-05-31 Peter O'Gorman <peter@pogma.com> |
| |
| Skip darwin test if fat link fails. |
| * tests/darwin.at: Skip if we can not link a fat program. |
| Reported by Daniel Macks <dmacks@netspace.org> |
| |
| 2008-05-26 Ralf Wildenhues <Ralf.Wildenhues@gmx.de> |
| |
| libtoolize should not remove config.guess, config.sub. |
| * libtoolize.m4sh (all_pkgconfig_files): Do not list |
| config.guess nor config.sub. We don't install them without |
| --install, and the project may not be using Automake. |
| Report by Andreas Schwab. |
| |
| Simplify argument parsing in cwrapper. |
| * libltdl/config/ltmain.m4sh (func_emit_cwrapperexe_src): |
| Use NULL where appropriate. Do not compute length of arguments |
| needlessly. |
| |
| 2008-05-25 Charles Wilson <libtool@cwilson.fastmail.fm> |
| |
| [mingw] Add cross-compile support to cwrapper |
| * libltdl/config/ltmain.m4sh (func_to_host_path) [$host=mingw]: |
| If present, use winepath to convert from $build to $host |
| if $build is neither mingw (msys) nor cygwin. Use unconverted |
| path as fallback when conversion fails. Also update comments. |
| (func_to_host_pathlist) [$host=mingw]: Ditto. For fallback case, |
| use simplistic ':' to ';' path separator translation. |
| |
| 2008-05-25 Charles Wilson <libtool@cwilson.fastmail.fm> |
| |
| Cwrapper should not eat -- arguments |
| * libltdl/config/ltmain.m4sh (func_emit_cwrapperexe_src) |
| [file scope]: Defined all option strings in terms of macro |
| LTWRAPPER_OPTION_PREFIX. Similarly defined all option string |
| lengths in terms of macro LTWRAPPER_OPTION_PREFIX_LENGTH. |
| [main]: Modified option parsing algorithm to pass -- on to |
| target, and to not stop processing arguments when -- is seen. |
| Added check for unrecognized options in reserved namespace |
| defined by LTWRAPPER_OPTION_PREFIX. |
| |
| 2008-05-25 Ralf Wildenhues <Ralf.Wildenhues@gmx.de> |
| |
| Fix ifort settings again. |
| * libltdl/m4/libtool.m4 (_LT_COMPILER_PIC) [linux] <ifort>: |
| Unlike icc and ecc, not all ifort versions understand `-KPIC', |
| e.g. version 10.1, so use `-fPIC' instead. |
| Report by Jeff Squyres. |
| |
| 2008-05-20 Eric Blake <ebb9@byu.net> |
| |
| Resynchronize argz whitespace changes from gnulib. |
| * libltdl/m4/argz.m4: Kill trailing whitespace. |
| * libltdl/argz.c: Likewise. |
| |
| 2008-05-19 Eric Blake <ebb9@byu.net> |
| |
| Fix regression from two days ago. |
| * libltdl/m4/ltdl.m4 (_LT_LIBOBJ): Don't refer to deleted macro. |
| |
| 2008-05-17 Eric Blake <ebb9@byu.net> |
| |
| Speed up bootstrap by improving lt_combine. |
| * libltdl/m4/ltsugar.m4 (lt_combine): Mirror Autoconf 2.62 |
| improvements. Includes a semantic change where the separator can |
| now be empty, and where an empty fourth argument is now treated as |
| a valid suffix. |
| * libltdl/m4/libtool.m4 (_lt_decl_varnames_tagged): Adjust to new |
| semantics of lt_combine. |
| (lt_decl_varnames_tagged): Fix quoting and optimize. |
| |
| Kill _LT_LIBSOURCES; it wasn't checking anything useful. |
| * libltdl/m4/ltdl.m4 (_LT_LIBSOURCES): Delete. |
| (LTDL_INIT): Ignore arguments to AC_LIBSOURCES during _LTDL_SETUP, |
| on the assumption that libtoolize correctly installed them. |
| |
| 2008-05-13 Charles Wilson <libtool@cwilson.fastmail.fm> |
| |
| [mingw|cygwin] Modify cwrapper to invoke target directly. |
| * libltdl/config/ltmain.m4sh (func_to_native_path): |
| New function. If $host is mingw, and $build is mingw |
| or cygwin, convert path to mingw native format. |
| (func_to_native_pathlist): New function. Ditto, for |
| :-separated pathlists. |
| (func_emit_cwrapperexe_src) [__CYGWIN__ && __STRICT_ANSI__]: |
| Ensure putenv and setenv are declared. Define HAVE_SETENV. |
| (func_emit_cwrapperexe_src) [main]: Add new constants to |
| hold desired PATH settings; initialize and use functions |
| above to convert to $host format if necessary. Add new |
| command-line options --lt-env-set, --lt-env-prepend, and |
| --lt-env-append. No longer emit wrapper script as integral |
| part of launching child. Remove support for (now) unnecessary |
| $TARGETSHELL. Exec actual target executable directly. |
| (func_emit_cwrapperexe_src) [lt_setenv, lt_extend_str] |
| [lt_split_name_value, lt_opt_process_env_set] |
| [lt_opt_process_env_prepend, lt_opt_process_env_append] |
| [lt_update_exe_path, lt_update_lib_path]: New functions. |
| |
| 2008-05-11 Charles Wilson <libtool@cwilson.fastmail.fm> |
| |
| Ensure cwrapper compiles without warnings under -std=c99. |
| * libltdl/config/ltmain.m4sh (func_emit_wrapper_part1): |
| new function. |
| (func_emit_wrapper_part2): new function. |
| (func_emit_wrapper): delegate to new functions. |
| (func_emit_cwrapperexe_src) [__CYGWIN__ && __STRICT_ANSI__]: |
| ensure realpath is declared. |
| (func_emit_cwrapperexe_src): declare two different strings |
| to each hold part of the wrapper script content. Initialize |
| using new func_emit_wrapper_partX functions. |
| (func_emit_cwrapperexe_src) [main]: when emitting wrapper |
| script content, use both strings. |
| Reported by Yaakov Selkowitz. |
| |
| 2008-05-06 Charles Wilson <libtool@cwilson.fastmail.fm> |
| |
| Ensure $OBJDUMP is defined |
| * libltdl/m4/libtool.m4 (_LT_DECL_OBJDUMP): new macro ensures |
| that $OBJDUMP is always defined sanely. |
| (_LT_SYS_DYNAMIC_LINKER): call it. |
| (_LT_CHECK_MAGIC_METHOD): call it. |
| |
| 2008-05-05 Gary V. Vaughan <gary@gnu.org> |
| |
| Fix libtoolize test failure with aclocal < 1.10.1 |
| * tests/libtoolize.at |
| (verbatim aclocal.m4 w/o AC_CONFIG_MACRO_DIR): Older aclocal |
| requires a space between -I and the directory argument. |
| Reported by Daniel Macks <dmacks@netspace.org> |
| |
| 2008-05-04 Gary V. Vaughan <gary@gnu.org> |
| |
| Set SCM version number to 2.2.5a. |
| * configure.ac, libltdl/configure.ac (AC_INIT): Bump version |
| number to 2.2.5a. |
| * NEWS: Updated. |
| |
| GNU Libtool 2.2.4 was released. |
| |
| * configure.ac, libltdl/configure.ac (AC_INIT): Bump version |
| number to 2.2.4. |
| * libltdl/Makefile.inc (LTDL_VERSION_INFO): C:R+1:A because the |
| interfaces are unchanged, even though we improved the code some |
| more. |
| * NEWS: Updated. |
| |
| Macro file serial updates for next stable release. |
| * libltdl/m4/libtool.m4, libltdl/m4/ltdl.m4, |
| libltdl/m4/ltoptions.m4, libltdl/m4/lt~obsolete.m4: Bump serial |
| numbers to account for changes since 2.2.2 release. |
| |
| Make libtoolize tests work with distcheck. |
| * tests/testsuite.at (_LIBTOOLIZE_TRANSFORM): When $tst_aclocal |
| is set, transform paths that use it to generic |
| /usr/local/share/aclocal in time for AT_CHECK comparisons. |
| |
| 2008-05-03 Gary V. Vaughan <gary@gnu.org> |
| |
| Don't trip over outdated acinclude.m4. |
| * libtoolize.m4sh (all_pkgconfig_files, all_pkgmacro_files) |
| (all_pkgltdl_files): New variables listing all files ever |
| maintained by any release of libtoolize. |
| (func_install_pkgconfig_parent, func_install_pkgltdl_files) |
| (func_install_pkgconfig_subproject, func_install_pkgmacro_parent) |
| (func_install_pkgmacro_subproject): Carefully clean up any files |
| that may have been installed by previous libtoolize releases. |
| * tests/libtoolize.at: New test for libltdl/acinclude.m4 removal. |
| Reported by Andreas Schwab <schwab@suse.de>. |
| |
| 2008-05-02 Peter O'Gorman <peter@pogma.com> |
| |
| It helps to close quotes. |
| * libltdl/config/ltmain.m4sh (func_mode_link): Add closing '. |
| |
| 2008-05-01 Peter O'Gorman <peter@pogma.com> |
| |
| Use AC_CHECK_TOOL for otool and otool64. |
| * libltdl/m4/libtool.m4 (_LT_REQUIRED_DARWIN_CHECKS): Check. |
| * libltdl/config/ltmain.m4sh (func_mode_link): Use. |
| Reported by Richard Purdie <rpurdie@rpsys.net> |
| |
| 2008-04-30 Eric Blake <ebb9@byu.net> |
| |
| Support cygwin 1.7.0 in loadlibrary loader. |
| * libltdl/m4/ltdl.m4 (LT_LIB_DLLOAD) <cygwin>: Check for modern |
| function. |
| * libltdl/loaders/loadlibrary.c (vm_open): Avoid deprecated |
| cygwin_conv_to_full_win32_path. |
| |
| 2008-04-29 Gary V. Vaughan <gary@gnu.org> |
| |
| New libtoolize --no-warn option and LIBTOOLIZE_OPTIONS parsing. |
| * libltdl/config/general.m4sh (opt_warning): New option. |
| (func_warning): Only display a warning message if $opt_warning |
| is true. |
| * libtoolize.m4sh: Accept options in LIBTOOLIZE_OPTIONS |
| environment variable. |
| (--no-warn): Parse new option. |
| (func_serial_update_check, func_keyword_update): Use func_warning. |
| (func_check_macros): Bail out before style issues nags when |
| $opt_warning is false. |
| * doc/libtool.texi (Invoking Libtoolize): Document it. |
| * tests/libtoolize.at: Test it. |
| * NEWS: Updated. |
| |
| Fix libtoolize test failure with aclocal-1.10.1. |
| * tests/libtoolize.at |
| (verbatim aclocal.m4 w/o AC_CONFIG_MACRO_DIR): Force aclocal to |
| search the source tree for latest libtool macros. |
| |
| 2008-04-24 Eric Blake <ebb9@byu.net> |
| |
| Fix bug in 2008-04-21 type improvements. |
| * libltdl/ltdl.c (load_deplibs): Fix casting bug. |
| |
| 2008-04-23 Michael Haubenwallner <michael.haubenwallner@salomon.at> |
| |
| Use /nonexistent as destination for files not to be installed. |
| * tests/darwin.at (darwin fat compile): Fix typo. |
| * tests/inherited_flags.at (inherited_linker_flags): Change |
| -rpath to /nonexistent. This helps to avoid accidentally |
| picking up libraries below /usr/local. |
| * tests/template.at (simple template test): Likewise. Fixes |
| test failure for additional incompatible libstdc++ in |
| /usr/local. |
| * tests/testsuite.at (configure_options): Add |
| --prefix=/nonexistent. |
| |
| 2008-04-23 Gary V. Vaughan <gary@gnu.org> |
| |
| * libtoolize.m4sh (rerun_aclocal): Remove unused variable. |
| Reported by Olly Betts <olly@survex.com> |
| |
| 2008-04-23 Ralf Wildenhues <Ralf.Wildenhues@gmx.de> |
| |
| * tests/static.at (ccache -all-static): Ignore link warnings. |
| Report by Gary V. Vaughan. |
| |
| 2008-04-22 Gary V. Vaughan <gary@gnu.org> |
| |
| Libtoolize now advises AC_CONFIG_MACRO_DIR use where appropriate. |
| * libtoolize.m4sh (func_check_macros): Always advise use of |
| AC_CONFIG_MACRO_DIR when not able to copy libtool macros into |
| the project tree. |
| * tests/libtoolize.at: New test for correct diagnosis of mismatch |
| between AC_CONFIG_MACRO_DIR and ACLOCAL_AMFLAGS. |
| Update expected output of other tests. |
| * NEWS: Updated. |
| |
| 2008-04-22 Ralf Wildenhues <Ralf.Wildenhues@gmx.de> |
| |
| Fix regression over 1.5.26 with ccache $CC -all-static. |
| * libltdl/config/ltmain.m4sh (func_mode_link): Add |
| $link_static_flag to compile_command and link_command only |
| later, instead of right after a possible compiler wrapper. |
| * tests/static.at (ccache -all-static): New test. |
| * THANKS: Update. |
| Report by Richard Purdie. |
| |
| 2008-04-22 Andreas Schwab <schwab@suse.de> |
| Ralf Wildenhues <Ralf.Wildenhues@gmx.de> |
| |
| Fix default argument for AC_LIBLTDL_CONVENIENCE. |
| * libltdl/m4/ltdl.m4 (AC_LIBLTDL_CONVENIENCE): Default argument |
| to libltdl. |
| (AC_LIBLTDL_INSTALLABLE): Likewise. |
| * tests/configure-iface.at (convenience libltdl): New test. |
| |
| 2008-04-21 Gary V. Vaughan <gary@gnu.org> |
| |
| Only complain that files are up-to-date with --force. |
| As a side effect, this also means that when `aclocal' copies the |
| libtool macros into `aclocal.m4' libtoolize complains only about |
| the macro files that are missing or not up-to-date. |
| * libtoolize.m4sh (func_echo_once): New function that prints |
| the contents of a named variable only on the first call. |
| (func_aclocal_update_check): New function that compares serial |
| numbers of libtool macros in aclocal.m4 and only diagnoses the |
| missing files. |
| (func_copy, func_copy_cb, func_copy_some_files, func_serial_update) |
| (func_keyword_update, func_ltmain_update, func_config_update) |
| (func_install_update): Accept a new argument naming a variable |
| containing a header string to print with func_echo_once iff any |
| body text is output by this function. |
| (func_install_pkgmacro_subproject, func_install_pkgmacro_parent) |
| (func_install_pkgltdl_files, func_install_pkgconfig_subproject) |
| (func_install_pkgconfig_parent: Set and pass a suitable |
| header string variable for the above functions. |
| (func_serial_update_check): Don't advise rerunning `libtoolize |
| --force' when aclocal.m4 is not m4_including libtoolize installed |
| macro files. |
| * tests/testsuite.at (_LIBTOOLIZE_TRANSFORM): Transform generic |
| /usr/local/share/aclocal paths to point into the uninstalled |
| libtool macro directory. |
| * tests/libtoolize.at: Update tests that were checking for old |
| behaviour of outputing `file is already up to date' even when |
| --force was not passed. |
| * tests/libtoolize.at: New tests to prevent regressions of these |
| smarter messages. |
| * NEWS: Updated. |
| Reported by Olly Betts <olly@survex.com> |
| |
| Capture lt~obsolete.m4 serial number correctly in libtoolize. |
| * libltdl/m4/lt~obsolete.m4: Add the filename to the #serial |
| marker so that libtoolize's serial number checks can find it |
| in a non-include using aclocal.m4. |
| * NEWS: Updated. |
| Reported by Olly Betts <olly@survex.com> |
| |
| Allow better compile time type checking for lt_dladvise. |
| * libltdl/lt__private.h (lt__handle, lt__advise): Typedefs |
| removed in favour of... |
| * libltdl/ltdl.h (lt_dlhandle), |
| libltdl/libltdl/lt_dlloader.h (lt_dladvise): ...changing from |
| void* to forward declarations. |
| * libltdl/loaders/dlopen.c, libltdl/loaders/loadlibrary.c, |
| libltdl/lt_dlloader.c, libltdl/ltdl.c: Remove many redundant |
| type casts. |
| * NEWS: Updated. |
| Suggested by Bob Friesenhahn <bfriesen@simple.dallas.tx.us> |
| |
| 2008-04-21 Peter O'Gorman <peter@pogma.com> |
| |
| basename does not take a list of strings. |
| * libltdl/config/ltmain.m4sh(func_extract_archives): Use sed |
| $basename. |
| * tests/darwin.at: New. Check that we can built fat program, |
| shared library and convenience library. |
| * Makefile.am: Add test. |
| Reported by LiKai Liu <liulk@cs.bu.edu> |
| |
| Use AC_CHECK_TOOL for lipo too. |
| * libltdl/m4/libtool.m4 (_LT_REQUIRED_DARWIN_CHECKS): Check. |
| * libltdl/config/ltmain.m4sh (func_extract_archives): Use. |
| |
| 2008-04-20 Gary V. Vaughan <gary@gnu.org> |
| |
| Fix misleading lt_dlopenadvise documentation. |
| * doc/libtool.texi (lt_dlopenadvise): The last parameter is of |
| type lt_dladvise, not lt_dladvise*. |
| (my_dlopenext): Correct the example too. |
| * NEWS: Updated. |
| Reported by Gary Kumfert <kumfert@llnl.gov> |
| |
| 2008-04-19 Ralf Wildenhues <Ralf.Wildenhues@gmx.de> |
| |
| Fix testsuite cleanup warnings on AIX with NFS. |
| * tests/testsuite.at [ aix ]: Set file mode creation so that |
| 'others' have no permissions. Shared libraries are kept in |
| memory on AIX after use if they are world-readable, which means |
| on NFS mounts cleanup of test group directories will fail later. |
| * THANKS: Update. |
| Report and analysis by Michael Haubenwallner. |
| |
| Fix nonportable use of expr. |
| * libltdl/config/ltmain.m4sh (func_mode_link) <Transforming |
| deplibs into only shared deplibs>: Fix expr portability issues, |
| noted on FreeBSD. While at it, simplify and avoid forking. |
| Report by Bob Friesenhahn. |
| |
| Exploit shell arithmetic expansion and ${#var}. |
| * libltdl/m4/libtool.m4 (_LT_CHECK_SHELL_FEATURES): Also check |
| for arithmetic expansion, and ${#var}. |
| (_LT_PROG_XSI_SHELLFNS): Define func_arith and func_len |
| accordingly, falling back on 'expr'. Note that the argument to |
| func_len may not start with a hyphen. In the pre-Posix |
| fallback, take care not to rely on the exit status of the |
| variable assignment (not portable), but set the length to |
| $max_cmd_len instead. |
| * libltdl/config/ltmain.m4sh (func_mode_link): Use func_arith |
| and func_len throughout for integer arithmetic, fixing |
| quadratical amount of counting for reloadable object and |
| piecewise archive linking. Change all comparisons with |
| max_cmd_len to test for smaller, non-equal length. |
| * THANKS: Update. |
| Suggested by Roland Mainz. |
| |
| * libltdl/config/ltmain.m4sh (func_mode_compile): Avoid |
| redundant removal of old output files before compilation. |
| Do not remove $obj until we have successfully grabbed the |
| lockfile (in case the compiler doesn't grok `-c -o'), because |
| it might be identical to $output_obj. |
| At the end of the function, before we remove the lockfile, |
| update $removelist so that if the trap hits after the lockfile |
| has been removed, we do not accidentally remove $output_obj that |
| does not belong to us. |
| (func_write_libtool_object): Use $MV instead of mv. |
| |
| 2008-04-18 Andreas Schwab <schwab@suse.de> |
| |
| * libltdl/m4/ltoptions.m4 (AC_ENABLE_SHARED): Check optional |
| argument. |
| (AC_ENABLE_STATIC): Likewise. |
| (AC_ENABLE_FAST_INSTALL): Likewise. |
| |
| 2008-04-16 Eric Blake <ebb9@byu.net> |
| |
| Make ChangeLog merges easier. |
| * .gitattributes: New file. |
| * HACKING: Mention how it helps. |
| |
| 2008-04-15 Peter O'Gorman <peter@pogma.com> |
| |
| Allow bootstrap from git repository. |
| * Makefile.am: Pass srcdir as an argument to mkstamp and expect |
| only 2 fields in mkstamps output. |
| * clcommit.m4sh: Ditto. |
| * configure.ac: Ditto. |
| * libltdl/config/mkstamp: return a revision and date based on |
| the number of lines which look like dates in all the ChangeLog* |
| files in the directory we got as arg 1. |
| |
| 2008-04-11 Eric Blake <ebb9@byu.net> |
| |
| Fix usage of setmode without declaration on cygwin. |
| * libltdl/config/ltmain.m4sh (func_emit_cwrapperexe_src): Ensure |
| setmode has prototype for both mingw and cygwin. |
| |
| 2008-04-10 Ralf Wildenhues <Ralf.Wildenhues@gmx.de> |
| |
| * libltdl/m4/libtool.m4 (_LT_PROG_XSI_SHELLFNS): Move non-XSI |
| definition of func_dirname_and_basename ... |
| * libltdl/config/general.m4sh (func_dirname_and_basename): |
| ... here, to use it for the other scripts that use general.m4sh |
| (and as portable fallback for libtool). Add marker for early |
| insertion of generated shell functions (into libtool, not the |
| other scripts) here. |
| Use func_dirname_and_basename to compute progname, progpath. |
| * libltdl/config/ltmain.m4sh (func_mode_help): Remove marker |
| for insertion of generated shell functions. |
| * tests/sh.test: Adjust function definition test to not match |
| function call. |
| |
| * libltdl/m4/libtool.m4 (_LT_PROG_XSI_SHELLFNS) <func_xform>: |
| New function. |
| * libltdl/config/ltmain.m4sh (func_mode_compile): Use it to |
| avoid two forks with XSI shells. |
| * tests/suffix.test: Also test a file with multiple dots. |
| |
| 2008-04-10 Peter O'Gorman <peter@pogma.com> |
| |
| * libltdl/config/ltmain.m4sh (func_win32_libid, |
| func_generate_dlsyms, func_extract_an_archive, |
| func_extract_archives, func_mode_help): move these so they |
| appear after func_mode_compile. |
| * tests/nomode.test: Check that --mode=link --help works. |
| Reported by Josh Triplett <josh@freedesktop.org> |
| |
| 2008-04-07 Gary V. Vaughan <gary@gnu.arg> |
| |
| * doc/libtool.texi (Libltdl interface): Add missing |
| documentation for lt_dlopenavise. |
| Reported by Anton Erti <anton@mips.complang.tuwien.ac.at> |
| |
| * configure.ac, libltdl/configure.ac (AM_INIT_AUTOMAKE): Use |
| gnu rather than gnits standards so that version number 2.2.3a |
| is not rejected! |
| Reported by Olly Betts <olly@survex.com> |
| |
| 2008-04-01 Gary V. Vaughan <gary@gnu.arg> |
| |
| * configure.ac, libltdl/configure.ac (AC_INIT): Bump version |
| number to 2.2.3a. |
| |
| GNU Libtool 2.2.2 was released. |
| |
| * configure.ac, libltdl/configure.ac (AC_INIT): Bump version |
| number to 2.2.2. |
| * libltdl/Makefile.in (LTDL_VERSION_INFO): C:R+1:A because the |
| interfaces are unchanged, even though we improved the code some |
| more. |
| * NEWS: Updated. |
| |
| * libltdl/m4/libtool.m4, libltdl/m4/ltdl.m4, |
| libltdl/m4/ltoptions.m4: Bump serial numbers to account for |
| changes since 2.2 release. |
| |
| 2008-03-27 Peter O'Gorman <peter@pogma.com> |
| |
| * libltdl/m4/libtool.m4 [_LT_REQUIRED_DARWIN_CHECKS]: Fix the |
| test for -single_module and log it to config.log. |
| Reported by Torok Edwin and Nigel Home. |
| |
| 2008-03-24 Ralf Wildenhues <Ralf.Wildenhues@gmx.de> |
| |
| Document that disable-static plus -all-static is not portable. |
| * doc/libtool.texi (Link mode): -all-static does not go well |
| with disable-static on most systems. |
| * tests/static.at (static linking flags for programs) [!aix]: |
| With --disable-static but nonempty link_static_flag, skip the |
| m-all-static link. Do not skip it on AIX, as there the |
| enable_static is self-inflicted, and thus expected to work. |
| * THANKS: Update. |
| Report by Nix. |
| |
| 2008-03-17 Ralf Wildenhues <Ralf.Wildenhues@gmx.de> |
| |
| * libltdl/m4/libtool.m4 (_LT_CHECK_BUILDDIR): No need to escape |
| backticks in argument to AC_MSG_WARN or AC_MSG_ERROR. |
| * libltdl/m4/ltdl.m4 (_LTDL_INSTALLABLE, LTDL_INIT): Likewise. |
| |
| 2008-03-16 Ralf Wildenhues <Ralf.Wildenhues@gmx.de> |
| |
| * libltdl/config/ltmain.m4sh (NLS nuisances): Fix quoting of |
| localization variables for shell-active characters. |
| * tests/localization.at (localized compiler messages): Extend |
| test. |
| * THANKS: Update. |
| Report by Mike Frysinger. |
| |
| 2008-03-15 Ralf Wildenhues <Ralf.Wildenhues@gmx.de> |
| |
| * tests/defs.m4sh (func_get_config): Build egrep regex to speed |
| up extracting several variables at once. Use it to extract all |
| default variables at once. Also extract build_alias and |
| host_alias from the libtool script. |
| (func_configure_nofail): Use build_alias and host_alias for |
| --build and --host, respectively. Pass each if nonempty. |
| * tests/testsuite.at: Pass --build if build_alias is nonemtpy. |
| * tests/quote.test: Extract ECHO and wl at once. |
| |
| * libltdl/m4/ltoptions.m4 (AC_LIBTOOL_WIN32_DLL): Require |
| AC_CANONICAL_HOST. |
| * THANKS: Update. |
| Report by Jakub Bogusz. |
| |
| 2008-03-14 Ralf Wildenhues <Ralf.Wildenhues@gmx.de> |
| |
| * NEWS: Update. |
| |
| 2008-03-12 Charles Wilson <libtool@cwilson.fastmail.fm> |
| |
| * libltdl/config/ltmain.m4sh (func_emit_cwrapperexe_src) [file |
| scope]: additional #includes and #defines to support... |
| (func_emit_cwrapperexe_src) [main]: ensure stdout is set to |
| binary mode for cygwin|mingw builds. Ensure temporary script |
| file is written in binary mode for cygwin|mingw builds. |
| (func_mode_link) [cygwin|mingw]: cross-build support - only |
| use cwrapper to generate shell wrapper if building native; |
| otherwise use func_emit_wrapper() |
| |
| 2008-03-12 Henning Nielsen Lund <hnl_dk@amigaos.dk> |
| |
| * libltdl/m4/libtool.m4 (_LT_SYS_DYNAMIC_LINKER) |
| (_LT_COMPILER_PIC, _LT_LINKER_SHLIBS) [amigaos]: Port to |
| AmigaOS4 shared libraries on powerpc. |
| * libltdl/m4/ltdl.m4 (LT_SYS_DLOPEN_DEPLIBS) [amigaos]: |
| Likewise. |
| * THANKS, NEWS: Update. |
| |
| 2008-03-09 Bruno Haible <bruno@clisp.org> |
| and Ralf Wildenhues <Ralf.Wildenhues@gmx.de> |
| |
| Fix compiler output to be in the user locale. |
| * libltdl/config/general.m4sh (func_show_eval_locale): New |
| function, for running commands in the user locale. |
| * libltdl/config/ltmain.m4sh (func_mode_compile): Use it for |
| compiling. |
| * tests/localization.at (localized compiler messages): New test. |
| * Makefile.am: Adjust. |
| Report by Bruno Haible. |
| |
| 2008-03-08 Ralf Wildenhues <Ralf.Wildenhues@gmx.de> |
| |
| Fix several test failures on Cygwin and MinGW. |
| * tests/nonrecursive.at: Use -no-undefined for foo.la. |
| * tests/recursive.at: Likewise. |
| * tests/subproject.at: Likewise. |
| * tests/lt_dladvise.at: For systems where undefined symbols are |
| not allowed, to not try to load the module libdepend. |
| [ mingw ]: Add to list of such systems. |
| * tests/testsuite.at (_LT_AT_TRANSLATE_TEXT_OUTPUT): New macro, |
| to translate line ending of expout and experr files suitable for |
| host executables. |
| (LT_AT_CHECK, LT_AT_NOINST_EXEC_CHECK): Use it. |
| Report by Bob Friesenhahn. |
| |
| Fix installcheck dependencies, fix for --program-transform-name. |
| * Makefile.am (installcheck-local): Depend upon tests/atconfig |
| and $(srcdir)/$(TESTSUITE). |
| * tests/testsuite.at (_LIBTOOLIZE_TRANSFORM): New macro. |
| (LT_AT_CHECK_LIBTOOLIZE): Use it to transform expout and experr |
| files suitably. |
| * HACKING: Update. |
| |
| Drop usage of obsolete macros AC_EXEEXT and AC_OBJEXT. |
| * libltdl/m4/libtool.m4 (_LT_ENABLE_LOCK, _LT_COMPILER_OPTION) |
| (_LT_COMPILER_C_O, LT_PATH_NM, _LT_CMD_GLOBAL_SYMBOLS, _LT_SETUP): |
| Drop usage of obsolete AC_OBJEXT and AC_EXEEXT. |
| * tests/am-subdir.at (C++ subdir-objects): Likewise. |
| |
| 2008-03-07 Peter O'Gorman <peter@pogma.com> |
| |
| * tests/convenience.at (Java convenience archives): Skip test if |
| gcj cannot compile a working executable from .java files. |
| Report by Nelson H. F. Beebe. |
| |
| * libltdl/m4/libtool.m4 (_LT_LANG_GCJ_CONFIG): Need to set LD. |
| Reported by Nelson H. F. Beebe. |
| |
| 2008-03-06 Peter O'Gorman <peter@pogma.com> |
| |
| * libltdl/m4/libtool.m4 (_LT_PROG_FC): Undo commit - bad idea. |
| |
| * libltdl/m4/libtool.m4 (_LT_PROG_FC): Report FC=no if the FC |
| compiler is not a GNU compiler and the CXX compiler is a GNU |
| compiler. |
| Reported by Nelson H. F. Beebe. |
| |
| 2008-03-06 Gary V. Vaughan <gary@gnu.org> |
| |
| * Makefile.maint (TSDEPS_DIST): Removed. No longer used. |
| (TSDEPS): libtool.m4 has long since moved to libltdl. |
| (cvs-dist): Don't put the suffix dot in twice. |
| |
| 2008-03-06 Ralf Wildenhues <Ralf.Wildenhues@gmx.de> |
| |
| * tests/convenience.at (Java convenience archives): Skip test if |
| gcj cannot compile a .java file. |
| Report by Nelson H. F. Beebe. |
| |
| 2008-03-05 Ralf Wildenhues <Ralf.Wildenhues@gmx.de> |
| |
| * libltdl/config/ltmain.m4sh (func_lalib_unsafe_p): redirect |
| and restore from stdin, not stdout. |
| * tests/execute-mode.at (execute mode): Adjust test to catch |
| this. |
| Report by Roberto Bagnara. |
| |
| 2008-03-04 Ralf Wildenhues <Ralf.Wildenhues@gmx.de> |
| |
| Fix libltdl to not skip dlopen on systems with several loaders, |
| such as HP-UX, Cygwin. |
| * libltdl/slist.c (slist_concat): When appending to the tail |
| of a list, do not drop items off the beginning of the list. |
| * NEWS: Update. |
| |
| * libltdl/config/ltmain.m4sh (func_mode_execute): Replace only |
| arguments we have identified as shell or C wrappers. |
| (func_emit_wrapper): Output error message on stderr. |
| * tests/execute-mode.at: New file, with --mode=execute tests. |
| * Makefile.am: Adjust. |
| * NEWS: Update. |
| Fixes 2.2 regression. Report by Roberto Bagnara. |
| |
| * libltdl/m4/libtool.m4 (_LT_CONFIG): Drop misleading `GNU' |
| prefix before the host package name in the "Generated by" line |
| for the libtool script. |
| * THANKS: Update. |
| Reports by Peter Rosin and Roberto Bagnara. |
| |
| * doc/libtool.texi (Module loaders for libltdl): Fix typo. |
| |
| * libltdl/loaders/dld_link.c (vl_exit): New function, zero out ... |
| (vtable): ... this new file static variable split out from ... |
| (get_vtable): ... here. Initialize vtable, register vl_exit as |
| dlloader_exit function. |
| * libltdl/loaders/dlopen.c: Likewise. |
| * libltdl/loaders/dyld.c: Likewise. |
| * libltdl/loaders/load_add_on.c: Likewise. |
| * libltdl/loaders/loadlibrary.c: Likewise. |
| * libltdl/loaders/shl_load.c: Likewise. |
| * libltdl/loaders/preopen.c: Likewise; vl_exit existed here |
| already. |
| * tests/lt_dlexit.at (lt_dlexit unloading libs): Update test. |
| * NEWS: Update. |
| Report by Andreas Schwab. |
| |
| 2008-03-01 Gary V. Vaughan <gary@gnu.org> |
| |
| * configure.ac, libltdl/configure.ac (AC_INIT): Bump version |
| number to 2.3a. |
| |
| GNU Libtool 2.2 was released. |
| |
| * configure.ac, libltdl/configure.ac (AC_INIT): Bump version |
| number to 2.2. |
| * NEWS: Updated. |
| |
| * tests/lt_dladvise.at, tests/lt_dlexit.at, |
| tests/need_lib_prefix.at: Skip these tests when called from |
| `make distcheck DISTCHECK_CONFIGURE_FLAGS=--disable-ltdl-install'. |
| The tests try to link against the dummy installed libltdl.la |
| from .../_inst/lib/libltdl.la, which does not exist when |
| configured with --disable-ltdl-install. |
| |
| 2008-02-29 Gary V. Vaughan <gary@gnu.org> |
| |
| * libltdl/m4/argz.m4 (AC_CHECK_FUNCS): Also use our replacement |
| argz if the system argz_add or argz_count are missing. |
| Report by Juan Manuel Guerrero <juan.guerrero@gmx.de>. |
| |
| 2008-02-26 Karl Berry <karl@freefriends.org> |
| |
| * libltdl/argz.c (argz_add, argz_count): New functions. |
| * libltdl/argz_.h: Declare them. |
| Report by Juan Manuel Guerrero <juan.guerrero@gmx.de>. |
| |
| 2008-02-20 Peter O'Gorman <peter@pogma.com> |
| |
| * libltdl/m4/libtool.m4 (_LT_LANG_GCJ_CONFIG): Do not call the |
| _LT_SYS_DYNAMIC_LINKER macro here. |
| Reported by Mike Frysinger <vapier@gentoo.org> |
| |
| 2008-02-15 Peter O'Gorman <peter@pogma.com> |
| |
| * libltdl/m4/libtool.m4 (_LT_SYS_HIDDEN_LIBDEPS): Fix typo. |
| |
| 2008-02-14 Peter Breitenlohner <peb@mppmu.mpg.de> |
| |
| * libltdl/m4/libtool.m4 (_LT_SYS_DYNAMIC_LINKER): better handling |
| of predefined values for lt_cv_sys_lib_search_path_spec and |
| lt_cv_sys_lib_dlsearch_path_spec. |
| |
| 2008-02-14 Ralf Wildenhues <Ralf.Wildenhues@gmx.de> |
| |
| * libtoolize.m4sh (func_install_pkgconfig_files): Only call |
| func_install_pkgconfig_parent if $seen_autoconf. |
| * tests/standalone.at (compiling softlinked libltdl) |
| (compiling copied libltdl, installable libltdl) |
| (linking libltdl without autotools): Use checked libtoolize |
| calls to catch warnings. |
| |
| 2008-02-13 Ralf Wildenhues <Ralf.Wildenhues@gmx.de> |
| |
| * libltdl/configure.ac: Bump package version. |
| * HACKING: Reminder to do it next time, too. |
| |
| 2008-02-11 Ralf Wildenhues <Ralf.Wildenhues@gmx.de> |
| |
| * tests/mdemo/Makefile.am (@LIBLTDL@): Update outdated |
| dependencies. |
| ($(top_distdir)/libltdl/libtool): Remove. |
| Fixes spurious mdemo-dryrun failure with OpenBSD make. |
| |
| 2008-02-09 Ralf Wildenhues <Ralf.Wildenhues@gmx.de> |
| |
| * libltdl/m4/libtool.m4 (_LT_COMPILER_PIC) [linux] <ifort>: |
| Treat like icc and ecc, for fixed `-Wl,' and `-KPIC' settings. |
| |
| 2008-02-08 Ralf Wildenhues <Ralf.Wildenhues@gmx.de> |
| |
| * tests/archive-in-archive.at |
| (static library contains static library): Test also the actual |
| broken link command, and the following install command, as |
| UnixWare ar rightly refuses to put an archive into an archive. |
| Report by Tim Rice. |
| |
| 2008-02-06 Peter O'Gorman <peter@pogma.com> |
| |
| * libltdl/m4/ltoptions.m4 (_LT_SET_OPTIONS): Only set default |
| LT_INIT values for LT_INIT, not LTDL_INIT. |
| Reported by Jochem Huhmann <joh@revier.com> |
| |
| 2008-02-01 Ralf Wildenhues <Ralf.Wildenhues@gmx.de> |
| |
| * tests/testsuite.at (LT_AT_TAG): For the CXX tag, if $CXX is |
| g++, check that `g++ -v' works; AC_PROG_CXX may have set that |
| as default value even if it found no C++ compiler. |
| Report by Andreas Schwab. |
| |
| 2008-02-02 Gary V. Vaughan <gary@gnu.org> |
| |
| * libltdl/Makefile.inc (EXTRA_DIST): Now that we're not using |
| Autoconf's AC_SOURCES macro, Automake can't trace our extra |
| source files argz, lt__dirent.c and lt__strl.c. List them |
| manually here to make sure they are distributed. |
| * NEWS: Updated. |
| Reported by Bob Friesenhahn <bfriesen@simple.dallas.tx.us> |
| |
| 2008-02-01 Gary V. Vaughan <gary@gnu.org> |
| |
| * configure.ac (AC_INIT): Bump version number to 2.1c. |
| |
| GNU Libtool 2.1b was released. |
| |
| * configure.ac (AC_INIT): Bump version number to 2.1b. |
| * libltdl/Makefile.inc (LTDL_VERSION_INFO): Increment to account |
| for new interfaces since the last libltdl update. |
| * HACKING (Release Procedure): Note that LTDL_VERSION_INFO is now |
| kept in libltdl/Makefile.inc. |
| |
| 2008-02-01 Gary V. Vaughan <gary@gnu.org> |
| |
| * tests/cdemo, tests/depdemo, tests/fcdemo, tests/pdemo, |
| tests/demo, tests/f77demo, tests/mdemo, tests/tagdemo |
| (distclean-local): Remove compiler file droppings left by |
| Autoconf tests that prevent make dist from finishing on |
| several machines including Mac OS 10.5. |
| |
| 2008-02-01 Gary V. Vaughan <gary@gnu.org> |
| |
| Unfortunately, the autoconf implementation of AC_LIBOBJ and |
| friends requires all libobjs to be in the same directory, as |
| declared by AC_CONFIG_LIBOBJ_DIR. That might prevent using |
| either recursive or nonrecursive libltdl if the parent project |
| has libobjs of its own, except that this patch tracks libltdl's |
| libobjs in another namespace: |
| |
| * libltdl/m4/ltdl.m4 (_LT_LIBOBJ, _LT_LIBSOURCES): Versions of |
| AC_LIBOBJ and AC_LIBSOURCES that save missing sources in a |
| ltdl_LIBOBJS automake macro, instead of the global LIBOBJS |
| automake macro. Content of the macros inspired by code from |
| gnulib-tool. |
| (_LTDL_MODE_DISPATCH): Initialise lt_libobj_prefix in |
| nonrecursive mode. |
| (LTDL_INIT): Push and pop the new definitions around potential |
| sites that call AC_LIBOBJ. Also, using lt_libobj_prefix, |
| initialise ltdl_LIBOBJS and ltdl_LTLIBOBJS. |
| * libtoolize.m4sh (func_fixup_Makefile): Substitute ltdl_LIBOBJS |
| and ltdl_LTLIBOBJS for LIBOBJS and LTLIBOBJS during copying |
| either Makefile.am or Makefile.inc, depending on ltdl_mode. |
| Reported by Eric Blake <ebb9@byu.net> |
| |
| 2008-01-30 Gary V. Vaughan <gary@gnu.org> |
| |
| There are 5 distinct batches of files that libtoolize might |
| install into a project, depending on whether libltdl is |
| being installed in subproject mode, and in that case whether |
| the parent project shares the config and macro directories |
| with the subproject ltdl. Make a separate function for each |
| of those 5 batches (4 new functions below, plus the recently |
| factored func_install_pkgltdl_files), and make a clearer |
| distinction between when each of them is needed: |
| |
| * libtoolize.m4sh (func_install_pkgmacro_subproject): |
| New function for installing and reporting on m4 files copied |
| to a subproject ltdl directory. |
| (func_install_pkgmacro_parent): Similar new function for m4 |
| files copied solely for the use of the parent project, |
| including serial checking. |
| (func_install_pkgconfig_subproject): New function for |
| installing and reporting on config helper files copied to a |
| subproject ltdl directory. |
| (func_install_pkgconfig_parent): Similar new function for |
| config helper files copied solely for the use of the parent |
| project, including serial checking. |
| (func_install_pkgmacro_files, func_install_pkgconfig_files): |
| Rewritten in terms of the above functions. |
| * tests/libtoolize.at: Adjust test expout's to match newly |
| regularized libtoolize output. |
| Move parent project pkgconfig files to build-aux directory |
| so that progress messages show an obvious difference to |
| pkgconfig files installed to subproject `config' directory. |
| (nonrecursive ltdl with AC_CONFIG_MACRO_DIR): New test. |
| (diagnose missing LT_CONFIG_LTDL_DIR): New test. |
| (subproject ltdl with non-shared directories): New test. |
| Reported by Eric Blake <ebb9@byu.net> |
| |
| 2008-01-29 Peter O'Gorman <peter@pogma.com> |
| |
| * libltdl/m4/libtool.m4 [darwin]: Changes to glob pattern matching |
| to be safer. |
| |
| Search the compiler path too. |
| * libltdl/m4/libtool.m4 (compiler_lib_search_dirs): New variable. |
| * libltdl/config/ltmain.m4sh: Use it. |
| Reported by Maynard Johnson |
| |
| 2008-01-28 Gary V. Vaughan <gary@gnu.org> |
| |
| * libtoolize.m4sh (func_check_macros): Correct typo with |
| '$opt_quiet ||' where '$opt_quiet &&' that was preventing |
| func_check_macros from running! |
| |
| * libtoolize.m4sh: Set opt_ltdl whenever seen_ltdl is set |
| so that libtoolize behaves as though --ltdl was passed even |
| if it wasn't as long as LTDL_INIT (or equivalent) was seen |
| in configure.ac. Adjust redundant '$opt_ltdl || $seen_ltdl' |
| to simply '$opt_ltdl'. |
| Reported by Eric Blake <ebb9@byu.net> |
| |
| * libtoolize.m4sh (func_check_macros): Check opt_quiet |
| in the function itself to simplify calling it. Also move |
| the definition of the function. |
| |
| * libtoolize.m4sh (func_scan_files): Be sure to set the |
| default libltdl mode to 'subproject' when libtoolize is |
| executed before configure.ac has been updated. |
| |
| 2008-01-27 Gary V. Vaughan <gary@gnu.org> |
| |
| * libtoolize.m4sh (func_install_pkgconfig_files) |
| (func_install_pkgmacro_files, func_install_pkgltdl_files): |
| Factored out from the 'Main' section of the file. |
| |
| * libtoolize.m4sh (subproject_auxdir, subproject_macrodir): |
| New variables to hold the default locations for auxfiles |
| and macrofiles in a subproject libltdl. |
| (ac_auxdir, ac_macrodir): New variables to hold the values |
| passed by AC_CONFIG_AUX_DIR and AC_CONFIG_MACRO_DIR resp. |
| (auxdir, macrodir): Adjust to contain the values to be |
| used by libtoolize at runtime. |
| |
| * libtoolize.m4sh (func_fixup_Makefile) |
| (func_massage_aclocal_DATA, func_massage_pkgltdl_files) |
| (func_massage_pkgconfig_files): Add missing $opt_debug. |
| |
| 2008-01-27 Gary V. Vaughan <gary@gnu.org> |
| |
| * libtoolize (func_fixup_Makefile, func_massage_aclocal_DATA) |
| (func_massage_pkgltdl_files, func_massage_pkgconfig_files): |
| Add missing $opt_debug. |
| |
| 2008-01-26 Gary V. Vaughan <gary@gnu.org> |
| |
| * libtoolize.m4sh (Main): Copy (or link) libltdl sources |
| into project tree when LTDL_INIT was seen, whether or not |
| `--ltdl' is passed. |
| (func_check_macros): Recommend LTDL_INIT instead of |
| LT_WITH_LTDL when `--ltdl' is used before configure.ac is |
| upgraded. |
| * tests/libtoolize.at: Test that it works. |
| (_LT_AT_LTDL_SETUP): Factor out some common test setup. |
| Reported by Eric Blake <ebb9@byu.net> |
| |
| 2008-01-24 Peter O'Gorman <peter@pogma.com> |
| |
| * doc/notes.texi: Fix errors in previous commit. |
| |
| * libltdl/m4/libtool.m4 (sys_lib_search_path_spec, |
| sys_lib_dlsearch_path_spec): Allow for a cache variable |
| lt_cv_sys_lib_... to set these at configure time. |
| * doc/notes.texi: Short note about the above change. |
| |
| 2008-01-24 Eric Blake <ebb9@byu.net> |
| |
| Add proper quoting to doc examples. |
| * doc/libtool.texi: Use m4 quotes where appropriate. |
| (Test descriptions): Fix truncated sentence. |
| |
| 2008-01-18 Gary V. Vaughan <gary@gnu.org> |
| |
| * Makefile.am (DISTCLEANFILES): Remove libtool.dvi generated |
| by 'make dvi'. |
| |
| 2008-01-17 Ralf Wildenhues <Ralf.Wildenhues@gmx.de> |
| |
| * libtoolize.m4sh (func_scan_files): Avoid matching our own |
| macro code when scanning configure.ac and aclocal.m4. |
| Don't produce spurious output if AC_PROG_RANLIB is found. |
| * tests/old-m4-iface.at (AM_PROG_LIBTOOL): Add a (weak) check |
| that we don't match our own macro code when searching for user |
| code calling us. |
| * TODO: Updated. |
| |
| 2008-01-17 Ralf Wildenhues <Ralf.Wildenhues@gmx.de> |
| |
| New variable LTDLDEPS for use in output_DEPENDENCIES. |
| |
| * libltdl/m4/ltdl.m4 (_LTDL_CONVENIENCE, _LTDL_INSTALLABLE) |
| (LTDL_INIT): Set and substitute LTDLDEPS according to chosen |
| method. |
| * tests/configure-iface.at (installable libltdl) |
| (--with-ltdl-include/lib, --with-included-ltdl): Test it. |
| * doc/libtool.texi (Distributing libltdl): Document LTDLDEPS. |
| * NEWS: Updated. |
| Dependency bug exposed by Eric Blake in M4, found by Bob Proulx |
| build daemon. |
| |
| 2008-01-17 Ralf Wildenhues <Ralf.Wildenhues@gmx.de> |
| |
| * doc/libtool.texi (Distributing libltdl): Clarify that |
| `${top_build_prefix}' may be used in place of `${top_builddir}/'. |
| |
| * doc/libtool.texi (Distributing libltdl): Clarify that |
| LTDL_INIT goes after LT_INIT; also show the latter in the |
| respective examples. |
| * tests/subproject.at: Adjust order. |
| |
| 2008-01-16 Ralf Wildenhues <Ralf.Wildenhues@gmx.de> |
| |
| * libltdl/m4/ltdl.m4 (_LT_ENABLE_INSTALL): Use AM_CONDITIONAL |
| only if defined. Allows to use libltdl without aclocal. |
| |
| 2008-01-16 Peter O'Gorman <peter@pogma.com> |
| |
| * libltdl/m4/libtool.m4: Set GCC var for every tag, avoids need |
| to set withGCC var. |
| |
| 2008-01-15 Ralf Wildenhues <Ralf.Wildenhues@gmx.de> |
| |
| * configure.ac: Set libltdl nonrecursive option, to avoid |
| configuring libltdl inside the Libtool package. |
| |
| 2008-01-14 Ralf Wildenhues <Ralf.Wildenhues@gmx.de> |
| |
| Silence all non-warning output from `libtool --silent'. |
| * libltdl/config/ltmain.m4sh (func_generate_dlsyms) |
| (func_extract_archives, func_mode_link): Use func_verbose |
| instead of func_echo for all non-warning output. |
| |
| * Makefile.maint (fetch): Update to match upstream git sources. |
| Pull `INSTALL' from gnulib instead of from Autoconf. |
| |
| * doc/notes.texi: Mention AIX binutils deficiency for C++ code. |
| Report by Rainer Tammer. |
| Suggest using bash for configure. |
| |
| * libltdl/m4/ltoptions.m4 (AC_ENABLE_SHARED): Fix to use |
| new _LT_SET_OPTION semantics. |
| |
| 2008-01-12 Ralf Wildenhues <Ralf.Wildenhues@gmx.de> |
| |
| * libltdl/m4/ltdl.m4 (_LTDL_SETUP): Define |
| LTDL_DLOPEN_SELF_WORKS, depending upon lt_cv_dlopen_self. |
| * libltdl/loaders/dlopen.c (vm_open) [!LTDL_DLOPEN_SELF_WORKS]: |
| Fail for dlopen(NULL), so that the preopen loader is used. This |
| fixes mdemo-exec.test failures on AIX where dlopen(NULL) |
| succeeds but dlsym resolves no symbol. |
| * NEWS: Update. |
| Report by Rainer Tammer. |
| |
| * tests/am-subdir.at: Drop unused variables. |
| * tests/configure-iface.at: Likewise. |
| * tests/ctor.at: Likewise. |
| * tests/early-libtool.at: Likewise. |
| * tests/lt_dladvise.at: Likewise. |
| * tests/old-m4-iface.at: Likewise. |
| * tests/lt_dlexit.at: Likewise. Also drop unused functions. |
| |
| * tests/old-m4-iface.at (AM_PROG_LIBTOOL): Also copy needed |
| lt~obsolete.m4. |
| |
| * libltdl/config/ltmain.m4sh (func_mode_link): Fix warning |
| about -l and -L for archives and objects as output, to not |
| trigger for *.la files. Non-convenience archives are diagnosed |
| later on. |
| |
| * tests/configure-iface.at: Ensure LTDLINCL is expanded |
| before CPPFLAGS, so that even CPPFLAGS=-I/usr/local/include |
| won't make the tests prefer an installed ltdl.h over the |
| in-package one. |
| * tests/lt_dladvise.at, tests/lt_dlexit.at: Likewise. |
| * tests/need_lib_prefix.at, tests/old-m4-iface.at: Likewise. |
| Report by Bob Friesenhahn. |
| |
| 2008-01-11 Ralf Wildenhues <Ralf.Wildenhues@gmx.de> |
| |
| * libltdl/m4/libtool.m4 (_LT_LINKER_SHLIBS) <exclude_expsyms>: |
| Also exclude `_GLOBAL__F[ID]_.*'. Also set for the C++ tag. |
| Fixes esp. demo/helldl build failure with GCC on AIX. |
| Report by Rainer Tammer. |
| |
| 2008-01-11 Peter O'Gorman <peter@pogma.com> |
| |
| * libltdl/m4/libtool.m4 [darwin]: Reorganize darwin support, use |
| dsymutil if it is available so that debugging is possible, check |
| for nmedit and dsymutil with AC_CHECK_TOOL, use the linker flag |
| -exported_symbols_list in preference to nmedit if it is available. |
| Drop support for xlc, it is probably broken. |
| * tests/template.at [darwin]: Skip this test, I can not find a way |
| to make it work on darwin9 with Xcode-3.0. |
| * NEWS: Note the dropping of xlc support. |
| |
| 2008-01-08 Ralf Wildenhues <Ralf.Wildenhues@gmx.de> |
| |
| * libltdl/m4/libtool.m4 (LT_INIT): m4_require, not AC_REQUIRE |
| _LT_CHECK_BUILDDIR, as it's m4_defun'ed, not AC_DEFUN'ed. |
| Report by Peter O'Gorman. |
| |
| * libltdl/m4/ltdl.m4 (_LTDL_INSTALLABLE): Restore correct |
| _LT_BUILD_PREFIX-using code. |
| |
| 2008-01-08 Gary V. Vaughan <gary@gnu.org> |
| |
| * tests/recursive.at: Remove bogus --debug option. |
| Reported by Ralf Wildenhues <Ralf.Wildenhues@gmx.de> |
| |
| * tests/configure-iface.at: Build libltdl in a subdir so that |
| it can be easily removed without trying to remove config.log |
| on windows (which can't delete a file until it is closed). |
| Reported by Ralf Wildenhues <Ralf.Wildenhues@gmx.de> |
| |
| * libltdl/m4/ltdl.m4 (LTDL_INSTALLABLE): Use _LT_BUILD_PREFIX |
| instead of ${top_builddir} for Autoconf-2.62. |
| Reported by Ralf Wildenhues <Ralf.Wildenhues@gmx.de> |
| |
| * libltdl/m4/ltdl.m4 (_LT_CONFIG_LTDL_DIR): Correct closing |
| comment. |
| Reported by Ralf Wildenhues <Ralf.Wildenhues@gmx.de> |
| |
| * NEWS: Grammar nit. |
| |
| * tests/configure-iface.at, tests/nonrecursive.at, |
| tests/recursive.at, tests/subproject.at (_LTDL_SETUP): |
| Renamed to _LT_AT_LTDL_SETUP to avoid a nameclash with |
| libltdl/m4/ltoptions.m4:_LTDL_SETUP from yesterday's patch. |
| Reported by Ralf Wildenhues <Ralf.Wildenhues@gmx.de> |
| |
| 2008-01-07 Ralf Wildenhues <Ralf.Wildenhues@gmx.de> |
| |
| * tests/runpath-in-lalib.at (Runpath in libtool library files): |
| Compile program file without libtool. |
| Report by Rainer Tammer. |
| |
| 2008-01-07 Rainer Tammer <tammer@tammer.net> (tiny change) |
| Ralf Wildenhues <Ralf.Wildenhues@gmx.de> |
| |
| Support AIX 6.1. |
| * libltdl/m4/libtool.m4 (_LT_SYS_DYNAMIC_LINKER) |
| (_LT_CHECK_MAGIC_METHOD, _LT_COMPILER_PIC, _LT_LINKER_SHLIBS) |
| (_LT_LANG_C_CONFIG, _LT_LANG_CXX_CONFIG, _LT_LANG_F77_CONFIG) |
| (_LT_LANG_FC_CONFIG): Adjust case patterns to match AIX 6 |
| through 9 as well. |
| * libltdl/m4/ltdl.m4 (LT_SYS_DLOPEN_DEPLIBS): Likewise. |
| * NEWS: Update. |
| * THANKS: Update. |
| |
| 2008-01-07 Gary V. Vaughan <gary@gnu.org> |
| |
| Move libltdl build mode options from LT_CONFIG_LTDL_DIR to |
| LTDL_INIT. Accept (optional) new 'convenience' and 'installable' |
| options in lieu of LTDL_CONVENIENCE and LTDL_INSTALL macros. And |
| also, implement --with-included-ltdl, --with-ltdl-lib and |
| --with-ltdl-include configure-time options: |
| |
| * libltdl/m4/ltoptions.m4: Associate existing option settings with |
| LT_INIT. |
| (LT_OPTION_DEFINE): Associate options 'nonrecursive', 'recursive', |
| 'subproject', 'installable' and 'convenience' with LTDL_INIT. |
| (_LT_MANGLE_OPTION, _LT_SET_OPTION, _LT_IF_OPTION) |
| (_LT_UNLESS_OPTIONS, _LT_SET_OPTIONS): Add MACRO-NAME argument to |
| support options to named macros instead of hardcoding only LT_INIT |
| options. |
| * libltdl/m4/ltdl.m4 (_LTDL_CONVENIENCE): Factor common code from |
| LTDL_CONVENIENCE and LTDL_INIT([convenience]). |
| (_LTDL_INSTALLABLE): Factor out common code from LTDL_INSTALLABLE |
| and LTDL_INIT([installable]). |
| (_LTDL_SETUP): Renamed from LTDL_INIT. Support new configure-time |
| options: --with-included-ltdl, --with-ltdl-lib, |
| --with-ltdl-include. |
| (LTDL_CONVENIENCE, LTDL_INSTALLABLE): Adjust. |
| (LT_WITH_LTDL): Removed. |
| (LTDL_INIT): Parse caller options. |
| * libltdl/m4/libtool.m4 (LT_INIT): Declare that this macro must be |
| expanded before LTDL_INIT, and be sure to parse caller options. |
| * configure.ac: Call directly into internal _LTDL_SETUP macro. |
| * libtoolize.m4sh (func_scan_files): Ltdl mode argument moved from |
| LT_CONFIG_LTDL_DIR to LTDL_INIT. |
| * tests/nonrecursive.at, tests/recursive.at: Use new interfaces. |
| * tests/configure-iface.at: Test it. |
| * Makefile.am (TESTSUITE_AT): Add configure-iface.at. |
| * doc/libtool.texi (Distributing libltdl): Document improved |
| LTDL_INIT interfaces. |
| * NEWS: Updated. |
| |
| 2008-01-02 Ralf Wildenhues <Ralf.Wildenhues@gmx.de> |
| |
| * libltdl/config/ltmain.m4sh (func_mode_link): When creating |
| reloadable object files, avoid issuing plain `rm -f' without |
| further arguments, even if the line length limit is ridiculously |
| low as in the `Run tests with low max_cmd_len' test. This |
| failure is exposed on NetBSD. |
| Report by Patrick Welche. |
| |
| * Makefile.am (EXTRA_DIST): Add ChangeLog.2007. |
| * ChangeLog.2007: New, rotated, from... |
| * ChangeLog: ...here. |
| * NEWS, README, README.alpha, Makefile.am, libtoolize.m4sh, |
| libltdl/config/getopt.m4sh, libltdl/config/ltmain.m4sh, |
| libltdl/m4/libtool.m4: Bump copyright years. |
| |
| Continued in ChangeLog.2007 |
| |
| $Revision: 1.1.1.1 $ $Date: 2012/03/29 17:21:05 $ |
| |
| vim:tw=72 |
