| # libtoolize.at -- test libtoolize operation -*- Autotest -*- |
| # |
| # Copyright (C) 2005, 2007, 2008 Free Software Foundation, Inc. |
| # Written by Gary V. Vaughan, 2005 |
| # |
| # This file is part of GNU Libtool. |
| # |
| # GNU Libtool is free software; you can redistribute it and/or |
| # modify it under the terms of the GNU General Public License as |
| # published by the Free Software Foundation; either version 2 of |
| # the License, or (at your option) any later version. |
| # |
| # GNU Libtool is distributed in the hope that it will be useful, |
| # but WITHOUT ANY WARRANTY; without even the implied warranty of |
| # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| # GNU General Public License for more details. |
| # |
| # You should have received a copy of the GNU General Public License |
| # along with GNU Libtool; see the file COPYING. If not, a copy |
| # can be downloaded from http://www.gnu.org/licenses/gpl.html, |
| # or obtained by writing to the Free Software Foundation, Inc., |
| # 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. |
| #### |
| |
| |
| AT_BANNER([Libtoolize operation.]) |
| |
| # _LT_CONFIGURE_AC |
| # ---------------- |
| m4_define([_LT_CONFIGURE_AC], |
| [AT_DATA([configure.ac], |
| [[AC_INIT([libtoolize-demo], ]AT_PACKAGE_VERSION[, ]AT_PACKAGE_BUGREPORT[) |
| AC_CONFIG_AUX_DIR([build-aux]) |
| AC_CONFIG_MACRO_DIR([m4]) |
| LT_INIT |
| AC_OUTPUT |
| ]]) |
| ])# _LT_CONFIGURE_AC |
| |
| # _LT_LIBTOOLIZE_SETUP |
| # -------------------- |
| m4_define([_LT_LIBTOOLIZE_SETUP], |
| [_LT_CONFIGURE_AC |
| |
| test -d m4 || { rm -f m4 && mkdir m4; } |
| |
| rm -f m4/libtool.m4 m4/ltoptions.m4 build-aux/ltmain.sh |
| |
| AT_DATA([Makefile.am], |
| [[ACLOCAL_AMFLAGS = -I m4 |
| ]]) |
| |
| # This file should be upgraded. |
| AT_DATA([m4/libtool.m4], [[ |
| # serial 25 LT_INIT |
| ]]) |
| |
| # This file has a very high serial number, and should be left unchanged |
| # until --force is passed. |
| AT_DATA([m4/ltoptions.m4], [[ |
| # serial 99999 ltoptions.m4 |
| ]]) |
| |
| test -d build-aux || { rm -f build-aux && mkdir build-aux; } |
| |
| # This file has a very high serial number, and needs --force to be updated. |
| AT_DATA([build-aux/ltmain.sh], [[ |
| package_revision=9999.9999 |
| ]]) |
| |
| # This file has a very old serial number, but should be left unchanged |
| # unless the --install flag is invoked. |
| AT_DATA([build-aux/config.guess], [[ |
| timestamp='1970-01-01' |
| ]]) |
| ])# LT_LIBTOOLIZE_SETUP |
| |
| |
| ## ------------------- ## |
| ## Macro installation. ## |
| ## ------------------- ## |
| |
| AT_SETUP([libtoolize macro installation]) |
| |
| _LT_CONFIGURE_AC |
| |
| AT_DATA(expout, |
| [[libtoolize: putting auxiliary files in AC_CONFIG_AUX_DIR, `build-aux'. |
| libtoolize: copying file `build-aux/ltmain.sh' |
| libtoolize: putting macros in AC_CONFIG_MACRO_DIR, `m4'. |
| libtoolize: copying file `m4/libtool.m4' |
| libtoolize: copying file `m4/ltoptions.m4' |
| libtoolize: copying file `m4/ltsugar.m4' |
| libtoolize: copying file `m4/ltversion.m4' |
| libtoolize: copying file `m4/lt~obsolete.m4' |
| libtoolize: Consider adding `-I m4' to ACLOCAL_AMFLAGS in Makefile.am. |
| ]]) |
| |
| LT_AT_CHECK_LIBTOOLIZE([--copy], 0, expout) |
| |
| AT_CLEANUP |
| |
| |
| ## ------------------------- ## |
| ## ACLOCAL_AMFLAGS mismatch. ## |
| ## ------------------------- ## |
| |
| AT_SETUP([libtoolize macro directory mismatch error]) |
| |
| _LT_CONFIGURE_AC |
| |
| AT_DATA([Makefile.am], |
| [[ACLOCAL_AMFLAGS = -I me2 |
| ]]) |
| |
| AT_DATA(experr, |
| [[libtoolize: AC_CONFIG_MACRO_DIR([m4]) conflicts with ACLOCAL_AMFLAGS=-I me2. |
| ]]) |
| |
| LT_AT_CHECK_LIBTOOLIZE([--copy], 1, [ignore], experr) |
| |
| AT_CLEANUP |
| |
| ## -------------- ## |
| ## Serial update. ## |
| ## -------------- ## |
| |
| AT_SETUP([libtoolize macro serial update]) |
| |
| _LT_LIBTOOLIZE_SETUP |
| |
| |
| |
| ## -------------------------------------------------------------------- ## |
| ## First we try to update with some newer files in the destination dir. ## |
| ## -------------------------------------------------------------------- ## |
| |
| AT_DATA(expout, |
| [[libtoolize: putting macros in AC_CONFIG_MACRO_DIR, `m4'. |
| libtoolize: copying file `m4/libtool.m4' |
| libtoolize: copying file `m4/ltsugar.m4' |
| libtoolize: copying file `m4/ltversion.m4' |
| libtoolize: copying file `m4/lt~obsolete.m4' |
| ]]) |
| |
| AT_DATA(experr, |
| [[libtoolize: `build-aux/ltmain.sh' is newer: use `--force' to overwrite |
| libtoolize: `m4/ltoptions.m4' is newer: use `--force' to overwrite |
| ]]) |
| |
| LT_AT_CHECK_LIBTOOLIZE([--copy], 0, expout, experr) |
| |
| |
| ## ---------------------------------------------------------- ## |
| ## Next, a second update attempt with everything now updated. ## |
| ## ---------------------------------------------------------- ## |
| |
| AT_DATA(expout, [[]]) |
| |
| AT_DATA(experr, |
| [[libtoolize: `build-aux/ltmain.sh' is newer: use `--force' to overwrite |
| libtoolize: `m4/ltoptions.m4' is newer: use `--force' to overwrite |
| ]]) |
| |
| LT_AT_CHECK_LIBTOOLIZE([--copy], 0, expout, experr) |
| |
| |
| ## ----------------------------------------------------------- ## |
| ## Now, a forced update to downgrade files with newer serials. ## |
| ## ----------------------------------------------------------- ## |
| |
| AT_DATA(expout, |
| [[libtoolize: putting auxiliary files in AC_CONFIG_AUX_DIR, `build-aux'. |
| libtoolize: copying file `build-aux/ltmain.sh' |
| libtoolize: putting macros in AC_CONFIG_MACRO_DIR, `m4'. |
| libtoolize: copying file `m4/libtool.m4' |
| libtoolize: copying file `m4/ltoptions.m4' |
| libtoolize: copying file `m4/ltsugar.m4' |
| libtoolize: copying file `m4/ltversion.m4' |
| libtoolize: copying file `m4/lt~obsolete.m4' |
| ]]) |
| |
| LT_AT_CHECK_LIBTOOLIZE([--copy --force], 0, expout) |
| |
| |
| ## ---------------------------------------------------------------- ## |
| ## A final update attempt with everything previously force updated. ## |
| ## ---------------------------------------------------------------- ## |
| |
| AT_DATA(expout, [[]]) |
| |
| LT_AT_CHECK_LIBTOOLIZE([--copy], 0, expout) |
| |
| AT_CLEANUP |
| |
| |
| ## --------------- ## |
| ## --install flag. ## |
| ## --------------- ## |
| |
| AT_SETUP([libtoolize config files serial update]) |
| |
| _LT_LIBTOOLIZE_SETUP |
| |
| |
| |
| ## -------------------------------------------------------------------- ## |
| ## First we try to update with some newer files in the destination dir. ## |
| ## -------------------------------------------------------------------- ## |
| |
| AT_DATA(expout, |
| [[libtoolize: putting auxiliary files in AC_CONFIG_AUX_DIR, `build-aux'. |
| libtoolize: copying file `build-aux/config.guess' |
| libtoolize: copying file `build-aux/config.sub' |
| libtoolize: copying file `build-aux/install-sh' |
| libtoolize: putting macros in AC_CONFIG_MACRO_DIR, `m4'. |
| libtoolize: copying file `m4/libtool.m4' |
| libtoolize: copying file `m4/ltsugar.m4' |
| libtoolize: copying file `m4/ltversion.m4' |
| libtoolize: copying file `m4/lt~obsolete.m4' |
| ]]) |
| |
| AT_DATA(experr, |
| [[libtoolize: `build-aux/ltmain.sh' is newer: use `--force' to overwrite |
| libtoolize: `m4/ltoptions.m4' is newer: use `--force' to overwrite |
| ]]) |
| |
| LT_AT_CHECK_LIBTOOLIZE([--copy --install], 0, expout, experr) |
| |
| |
| ## ---------------------------------------------------------- ## |
| ## Next, a second update attempt with everything now updated. ## |
| ## ---------------------------------------------------------- ## |
| |
| AT_DATA(expout, [[]]) |
| |
| AT_DATA(experr, |
| [[libtoolize: `build-aux/ltmain.sh' is newer: use `--force' to overwrite |
| libtoolize: `m4/ltoptions.m4' is newer: use `--force' to overwrite |
| ]]) |
| |
| LT_AT_CHECK_LIBTOOLIZE([--copy --install], 0, expout, experr) |
| |
| |
| ## ----------------------------------------------------------- ## |
| ## Now, a forced update to downgrade files with newer serials. ## |
| ## ----------------------------------------------------------- ## |
| |
| AT_DATA(expout, |
| [[libtoolize: putting auxiliary files in AC_CONFIG_AUX_DIR, `build-aux'. |
| libtoolize: copying file `build-aux/config.guess' |
| libtoolize: copying file `build-aux/config.sub' |
| libtoolize: copying file `build-aux/install-sh' |
| libtoolize: copying file `build-aux/ltmain.sh' |
| libtoolize: putting macros in AC_CONFIG_MACRO_DIR, `m4'. |
| libtoolize: copying file `m4/libtool.m4' |
| libtoolize: copying file `m4/ltoptions.m4' |
| libtoolize: copying file `m4/ltsugar.m4' |
| libtoolize: copying file `m4/ltversion.m4' |
| libtoolize: copying file `m4/lt~obsolete.m4' |
| ]]) |
| |
| LT_AT_CHECK_LIBTOOLIZE([--copy --force --install], 0, expout) |
| |
| |
| ## ---------------------------------------------------------------- ## |
| ## A final update attempt with everything previously force updated. ## |
| ## ---------------------------------------------------------------- ## |
| |
| AT_DATA(expout, [[]]) |
| |
| LT_AT_CHECK_LIBTOOLIZE([--copy --install], 0, expout) |
| |
| AT_CLEANUP |
| |
| |
| ## ----------------------------------------------------------------- ## |
| ## Ensure libtoolize works when LT_CONFIG_LTDL_DIR is not specified. ## |
| ## ----------------------------------------------------------------- ## |
| |
| AT_SETUP([diagnose missing LT_CONFIG_LTDL_DIR]) |
| |
| AT_DATA(expout, |
| [[libtoolize: putting auxiliary files in AC_CONFIG_AUX_DIR, `build-aux'. |
| libtoolize: copying file `build-aux/config.guess' |
| libtoolize: copying file `build-aux/config.sub' |
| libtoolize: copying file `build-aux/install-sh' |
| libtoolize: copying file `build-aux/ltmain.sh' |
| libtoolize: putting macros in AC_CONFIG_MACRO_DIR, `m4'. |
| libtoolize: copying file `m4/argz.m4' |
| libtoolize: copying file `m4/libtool.m4' |
| libtoolize: copying file `m4/ltdl.m4' |
| libtoolize: copying file `m4/ltoptions.m4' |
| libtoolize: copying file `m4/ltsugar.m4' |
| libtoolize: copying file `m4/ltversion.m4' |
| libtoolize: copying file `m4/lt~obsolete.m4' |
| libtoolize: putting libltdl files in `ltdl'. |
| libtoolize: copying file `ltdl/COPYING.LIB' |
| libtoolize: copying file `ltdl/README' |
| libtoolize: copying file `ltdl/argz_.h' |
| libtoolize: copying file `ltdl/argz.c' |
| libtoolize: copying file `ltdl/loaders/dld_link.c' |
| libtoolize: copying file `ltdl/loaders/dlopen.c' |
| libtoolize: copying file `ltdl/loaders/dyld.c' |
| libtoolize: copying file `ltdl/loaders/load_add_on.c' |
| libtoolize: copying file `ltdl/loaders/loadlibrary.c' |
| libtoolize: copying file `ltdl/loaders/shl_load.c' |
| libtoolize: copying file `ltdl/lt__dirent.c' |
| libtoolize: copying file `ltdl/lt__strl.c' |
| libtoolize: copying file `ltdl/libltdl/lt__alloc.h' |
| libtoolize: copying file `ltdl/libltdl/lt__dirent.h' |
| libtoolize: copying file `ltdl/libltdl/lt__glibc.h' |
| libtoolize: copying file `ltdl/libltdl/lt__private.h' |
| libtoolize: copying file `ltdl/libltdl/lt__strl.h' |
| libtoolize: copying file `ltdl/libltdl/lt_dlloader.h' |
| libtoolize: copying file `ltdl/libltdl/lt_error.h' |
| libtoolize: copying file `ltdl/libltdl/lt_system.h' |
| libtoolize: copying file `ltdl/libltdl/slist.h' |
| libtoolize: copying file `ltdl/loaders/preopen.c' |
| libtoolize: copying file `ltdl/lt__alloc.c' |
| libtoolize: copying file `ltdl/lt_dlloader.c' |
| libtoolize: copying file `ltdl/lt_error.c' |
| libtoolize: copying file `ltdl/ltdl.c' |
| libtoolize: copying file `ltdl/ltdl.h' |
| libtoolize: copying file `ltdl/slist.c' |
| libtoolize: creating file `ltdl/Makefile.inc' |
| libtoolize: Remember to add `LT_CONFIG_LTDL_DIR([ltdl])' to `configure.ac'. |
| libtoolize: Consider adding `-I m4' to ACLOCAL_AMFLAGS in Makefile.am. |
| ]]) |
| |
| AT_DATA([configure.ac], |
| [[AC_INIT([libtoolize-demo], ]AT_PACKAGE_VERSION[, ]AT_PACKAGE_BUGREPORT[) |
| AC_CONFIG_AUX_DIR([build-aux]) |
| AC_CONFIG_MACRO_DIR([m4]) |
| LT_INIT |
| LTDL_INIT([nonrecursive]) |
| AC_OUTPUT |
| ]]) |
| |
| LT_AT_CHECK_LIBTOOLIZE([--copy --install --ltdl=ltdl], 0, expout) |
| |
| AT_CLEANUP |
| |
| |
| ## ---------------------------- ## |
| ## Make sure ltdl.m4 is copied. ## |
| ## ---------------------------- ## |
| |
| # _LT_AT_LTDL_SETUP |
| # ----------------- |
| # Macro to generate data files common to several tests. |
| m4_pushdef([_LT_AT_LTDL_SETUP], |
| [AT_DATA(expout, |
| [[libtoolize: putting auxiliary files in AC_CONFIG_AUX_DIR, `ltdl/config'. |
| libtoolize: linking file `ltdl/config/compile' |
| libtoolize: linking file `ltdl/config/config.guess' |
| libtoolize: linking file `ltdl/config/config.sub' |
| libtoolize: linking file `ltdl/config/depcomp' |
| libtoolize: linking file `ltdl/config/install-sh' |
| libtoolize: linking file `ltdl/config/missing' |
| libtoolize: linking file `ltdl/config/ltmain.sh' |
| libtoolize: putting macros in AC_CONFIG_MACRO_DIR, `ltdl/m4'. |
| libtoolize: linking file `ltdl/m4/argz.m4' |
| libtoolize: linking file `ltdl/m4/libtool.m4' |
| libtoolize: linking file `ltdl/m4/ltdl.m4' |
| libtoolize: linking file `ltdl/m4/ltoptions.m4' |
| libtoolize: linking file `ltdl/m4/ltsugar.m4' |
| libtoolize: linking file `ltdl/m4/ltversion.m4' |
| libtoolize: linking file `ltdl/m4/lt~obsolete.m4' |
| libtoolize: putting libltdl files in LT_CONFIG_LTDL_DIR, `ltdl'. |
| libtoolize: linking file `ltdl/COPYING.LIB' |
| libtoolize: linking file `ltdl/README' |
| libtoolize: linking file `ltdl/Makefile.am' |
| libtoolize: linking file `ltdl/configure.ac' |
| libtoolize: copying file `ltdl/aclocal.m4' |
| libtoolize: linking file `ltdl/Makefile.in' |
| libtoolize: linking file `ltdl/config-h.in' |
| libtoolize: linking file `ltdl/configure' |
| libtoolize: linking file `ltdl/argz_.h' |
| libtoolize: linking file `ltdl/argz.c' |
| libtoolize: linking file `ltdl/loaders/dld_link.c' |
| libtoolize: linking file `ltdl/loaders/dlopen.c' |
| libtoolize: linking file `ltdl/loaders/dyld.c' |
| libtoolize: linking file `ltdl/loaders/load_add_on.c' |
| libtoolize: linking file `ltdl/loaders/loadlibrary.c' |
| libtoolize: linking file `ltdl/loaders/shl_load.c' |
| libtoolize: linking file `ltdl/lt__dirent.c' |
| libtoolize: linking file `ltdl/lt__strl.c' |
| libtoolize: linking file `ltdl/libltdl/lt__alloc.h' |
| libtoolize: linking file `ltdl/libltdl/lt__dirent.h' |
| libtoolize: linking file `ltdl/libltdl/lt__glibc.h' |
| libtoolize: linking file `ltdl/libltdl/lt__private.h' |
| libtoolize: linking file `ltdl/libltdl/lt__strl.h' |
| libtoolize: linking file `ltdl/libltdl/lt_dlloader.h' |
| libtoolize: linking file `ltdl/libltdl/lt_error.h' |
| libtoolize: linking file `ltdl/libltdl/lt_system.h' |
| libtoolize: linking file `ltdl/libltdl/slist.h' |
| libtoolize: linking file `ltdl/loaders/preopen.c' |
| libtoolize: linking file `ltdl/lt__alloc.c' |
| libtoolize: linking file `ltdl/lt_dlloader.c' |
| libtoolize: linking file `ltdl/lt_error.c' |
| libtoolize: linking file `ltdl/ltdl.c' |
| libtoolize: linking file `ltdl/ltdl.h' |
| libtoolize: linking file `ltdl/slist.c' |
| ]]) |
| |
| AT_DATA([configure.ac], |
| [[AC_INIT([libtoolize-demo], ]AT_PACKAGE_VERSION[, ]AT_PACKAGE_BUGREPORT[) |
| LT_CONFIG_LTDL_DIR([ltdl]) |
| AC_CONFIG_AUX_DIR([ltdl/config]) |
| AC_CONFIG_MACRO_DIR([ltdl/m4]) |
| LT_INIT |
| LTDL_INIT |
| AC_OUTPUT |
| ]]) |
| |
| AT_DATA([Makefile.am], |
| [[ACLOCAL_AMFLAGS = -I ltdl/m4 |
| ]]) |
| ])# _LT_AT_LTDL_SETUP |
| |
| ## ------------------------------------------------ ## |
| ## First we make sure libtoolize --ltdl is working. ## |
| ## ------------------------------------------------ ## |
| |
| AT_SETUP([copy ltdl.m4 with shared macro directory]) |
| |
| _LT_AT_LTDL_SETUP |
| |
| LT_AT_CHECK_LIBTOOLIZE([--ltdl], 0, expout) |
| |
| AT_CLEANUP |
| |
| ## ----------------------------------------------------- ## |
| ## And also that libtoolize is taking note of LTDL_INIT. ## |
| ## ----------------------------------------------------- ## |
| |
| AT_SETUP([correctly parse LTDL_INIT from configure.ac]) |
| |
| _LT_AT_LTDL_SETUP |
| |
| LT_AT_CHECK_LIBTOOLIZE([], 0, expout) |
| |
| AT_CLEANUP |
| |
| ## ----------------------------------------------------------- ## |
| ## And finally, that libtoolize diagnoses a missing LTDL_INIT. ## |
| ## ----------------------------------------------------------- ## |
| |
| AT_SETUP([diagnose missing LTDL_INIT invocation]) |
| |
| AT_DATA(expout, |
| [[libtoolize: putting auxiliary files in AC_CONFIG_AUX_DIR, `ltdl/config'. |
| libtoolize: copying file `ltdl/config/compile' |
| libtoolize: copying file `ltdl/config/config.guess' |
| libtoolize: copying file `ltdl/config/config.sub' |
| libtoolize: copying file `ltdl/config/depcomp' |
| libtoolize: copying file `ltdl/config/install-sh' |
| libtoolize: copying file `ltdl/config/missing' |
| libtoolize: copying file `ltdl/config/ltmain.sh' |
| libtoolize: putting macros in AC_CONFIG_MACRO_DIR, `ltdl/m4'. |
| libtoolize: copying file `ltdl/m4/argz.m4' |
| libtoolize: copying file `ltdl/m4/libtool.m4' |
| libtoolize: copying file `ltdl/m4/ltdl.m4' |
| libtoolize: copying file `ltdl/m4/ltoptions.m4' |
| libtoolize: copying file `ltdl/m4/ltsugar.m4' |
| libtoolize: copying file `ltdl/m4/ltversion.m4' |
| libtoolize: copying file `ltdl/m4/lt~obsolete.m4' |
| libtoolize: putting libltdl files in LT_CONFIG_LTDL_DIR, `ltdl'. |
| libtoolize: copying file `ltdl/COPYING.LIB' |
| libtoolize: copying file `ltdl/README' |
| libtoolize: copying file `ltdl/Makefile.am' |
| libtoolize: copying file `ltdl/configure.ac' |
| libtoolize: copying file `ltdl/aclocal.m4' |
| libtoolize: copying file `ltdl/Makefile.in' |
| libtoolize: copying file `ltdl/config-h.in' |
| libtoolize: copying file `ltdl/configure' |
| libtoolize: copying file `ltdl/argz_.h' |
| libtoolize: copying file `ltdl/argz.c' |
| libtoolize: copying file `ltdl/loaders/dld_link.c' |
| libtoolize: copying file `ltdl/loaders/dlopen.c' |
| libtoolize: copying file `ltdl/loaders/dyld.c' |
| libtoolize: copying file `ltdl/loaders/load_add_on.c' |
| libtoolize: copying file `ltdl/loaders/loadlibrary.c' |
| libtoolize: copying file `ltdl/loaders/shl_load.c' |
| libtoolize: copying file `ltdl/lt__dirent.c' |
| libtoolize: copying file `ltdl/lt__strl.c' |
| libtoolize: copying file `ltdl/libltdl/lt__alloc.h' |
| libtoolize: copying file `ltdl/libltdl/lt__dirent.h' |
| libtoolize: copying file `ltdl/libltdl/lt__glibc.h' |
| libtoolize: copying file `ltdl/libltdl/lt__private.h' |
| libtoolize: copying file `ltdl/libltdl/lt__strl.h' |
| libtoolize: copying file `ltdl/libltdl/lt_dlloader.h' |
| libtoolize: copying file `ltdl/libltdl/lt_error.h' |
| libtoolize: copying file `ltdl/libltdl/lt_system.h' |
| libtoolize: copying file `ltdl/libltdl/slist.h' |
| libtoolize: copying file `ltdl/loaders/preopen.c' |
| libtoolize: copying file `ltdl/lt__alloc.c' |
| libtoolize: copying file `ltdl/lt_dlloader.c' |
| libtoolize: copying file `ltdl/lt_error.c' |
| libtoolize: copying file `ltdl/ltdl.c' |
| libtoolize: copying file `ltdl/ltdl.h' |
| libtoolize: copying file `ltdl/slist.c' |
| libtoolize: Remember to add `LTDL_INIT' to configure.ac. |
| libtoolize: Consider adding `-I ltdl/m4' to ACLOCAL_AMFLAGS in Makefile.am. |
| ]]) |
| |
| AT_DATA([configure.ac], |
| [[AC_INIT([libtoolize-demo], ]AT_PACKAGE_VERSION[, ]AT_PACKAGE_BUGREPORT[) |
| LT_CONFIG_LTDL_DIR([ltdl]) |
| AC_CONFIG_AUX_DIR([ltdl/config]) |
| AC_CONFIG_MACRO_DIR([ltdl/m4]) |
| LT_INIT |
| AC_OUTPUT |
| ]]) |
| |
| LT_AT_CHECK_LIBTOOLIZE([--ltdl --copy], 0, expout) |
| |
| AT_CLEANUP |
| |
| m4_popdef([_LT_AT_LTDL_SETUP]) |
| |
| ## ------------------------------------------------------ ## |
| ## Creating an aclocal.m4 without in-tree libtool macros. ## |
| ## ------------------------------------------------------ ## |
| |
| AT_SETUP([upgrading verbatim style aclocal.m4]) |
| |
| AT_DATA([configure.ac], |
| [[AC_INIT([libtoolize-demo], ]AT_PACKAGE_VERSION[, ]AT_PACKAGE_BUGREPORT[) |
| AC_CONFIG_AUX_DIR([build-aux]) |
| LT_INIT |
| AC_OUTPUT |
| ]]) |
| |
| AT_DATA([expout], |
| [[libtoolize: putting auxiliary files in AC_CONFIG_AUX_DIR, `build-aux'. |
| libtoolize: copying file `build-aux/ltmain.sh' |
| libtoolize: You should add the contents of the following files to `aclocal.m4': |
| libtoolize: `/usr/local/share/aclocal/libtool.m4' |
| libtoolize: `/usr/local/share/aclocal/ltoptions.m4' |
| libtoolize: `/usr/local/share/aclocal/ltversion.m4' |
| libtoolize: `/usr/local/share/aclocal/ltsugar.m4' |
| libtoolize: `/usr/local/share/aclocal/lt~obsolete.m4' |
| libtoolize: Consider adding `AC_CONFIG_MACRO_DIR([m4])' to configure.ac and |
| libtoolize: rerunning libtoolize, to keep the correct libtool macros in-tree. |
| libtoolize: Consider adding `-I m4' to ACLOCAL_AMFLAGS in Makefile.am. |
| ]]) |
| |
| LT_AT_CHECK_LIBTOOLIZE([--copy], 0, expout) |
| |
| |
| ## --------------------------------------- ## |
| ## Upgrading a hand maintained aclocal.m4. ## |
| ## --------------------------------------- ## |
| |
| AT_DATA([configure.ac], |
| [[AC_INIT([libtoolize-demo], ]AT_PACKAGE_VERSION[, ]AT_PACKAGE_BUGREPORT[) |
| AC_CONFIG_AUX_DIR([build-aux]) |
| AC_CONFIG_MACRO_DIR([m4]) |
| LT_INIT |
| AC_OUTPUT |
| ]]) |
| |
| AT_DATA([Makefile.am], |
| [[ACLOCAL_AMFLAGS = -I m4 |
| ]]) |
| |
| AT_DATA([aclocal.m4], |
| [[# This should need upgrading: |
| # serial 25 LT_INIT |
| AC_DEFUN([LT_INIT], |
| [blah]) |
| |
| # This is newer than the upgrade version: |
| # serial 99999 ltoptions.m4 |
| |
| # This is older than the upgrade version: |
| # serial 1 ltversion.m4 |
| ]]) |
| |
| AT_DATA([expout], |
| [[libtoolize: putting macros in AC_CONFIG_MACRO_DIR, `m4'. |
| libtoolize: copying file `m4/libtool.m4' |
| libtoolize: copying file `m4/ltoptions.m4' |
| libtoolize: copying file `m4/ltsugar.m4' |
| libtoolize: You should add the contents of `m4/ltsugar.m4' to `aclocal.m4'. |
| libtoolize: copying file `m4/ltversion.m4' |
| libtoolize: You should add the contents of `m4/ltversion.m4' to `aclocal.m4'. |
| libtoolize: copying file `m4/lt~obsolete.m4' |
| libtoolize: You should add the contents of `m4/lt~obsolete.m4' to `aclocal.m4'. |
| ]]) |
| |
| LT_AT_CHECK_LIBTOOLIZE([--copy], 0, expout) |
| |
| |
| ## ------------------------------------------- ## |
| ## Upgrading an aclocal maintained aclocal.m4. ## |
| ## ------------------------------------------- ## |
| |
| LT_AT_ACLOCAL([-I m4]) |
| |
| rm -f m4/libtool.m4 m4/ltoptions.m4 |
| |
| # This file should be upgraded. |
| AT_DATA([m4/libtool.m4], [[ |
| # serial 25 LT_INIT |
| AC_DEFUN([LT_INIT]) |
| ]]) |
| |
| # This file has a very high serial number, and should be left unchanged. |
| AT_DATA([m4/ltoptions.m4], [[ |
| # serial 99999 ltoptions.m4 |
| ]]) |
| |
| AT_DATA([expout], |
| [[libtoolize: putting macros in AC_CONFIG_MACRO_DIR, `m4'. |
| libtoolize: copying file `m4/libtool.m4' |
| ]]) |
| |
| AT_DATA([experr], |
| [[libtoolize: `m4/ltoptions.m4' is newer: use `--force' to overwrite |
| ]]) |
| |
| LT_AT_CHECK_LIBTOOLIZE([--copy], 0, expout, experr) |
| |
| ## ----------------------------------------------------------- ## |
| ## Now, a forced update to downgrade files with newer serials. ## |
| ## ----------------------------------------------------------- ## |
| |
| AT_DATA(expout, |
| [[libtoolize: putting auxiliary files in AC_CONFIG_AUX_DIR, `build-aux'. |
| libtoolize: copying file `build-aux/ltmain.sh' |
| libtoolize: putting macros in AC_CONFIG_MACRO_DIR, `m4'. |
| libtoolize: copying file `m4/libtool.m4' |
| libtoolize: copying file `m4/ltoptions.m4' |
| libtoolize: copying file `m4/ltsugar.m4' |
| libtoolize: copying file `m4/ltversion.m4' |
| libtoolize: copying file `m4/lt~obsolete.m4' |
| ]]) |
| |
| LT_AT_CHECK_LIBTOOLIZE([--copy --force], 0, expout) |
| |
| AT_CLEANUP |
| |
| |
| ## ------------------------------------------------------------------ ## |
| ## Ensure libtoolize works when AC_CONFIG_MACRO_DIR is not specified. ## |
| ## ------------------------------------------------------------------ ## |
| |
| AT_SETUP([verbatim aclocal.m4 w/o AC_CONFIG_MACRO_DIR]) |
| |
| AT_DATA([configure.ac], |
| [[AC_INIT([libtoolize-demo], ]AT_PACKAGE_VERSION[, ]AT_PACKAGE_BUGREPORT[) |
| LT_INIT |
| AC_OUTPUT |
| ]]) |
| |
| AT_DATA([aclocal.m4], |
| [[# This should need upgrading: |
| # serial 25 LT_INIT |
| AC_DEFUN([LT_INIT], |
| [blah]) |
| |
| # This is newer than the upgrade version: |
| # serial 99999 ltoptions.m4 |
| |
| # This is older than the upgrade version: |
| # serial 1 ltversion.m4 |
| ]]) |
| |
| AT_DATA([expout], |
| [[libtoolize: putting auxiliary files in `.'. |
| libtoolize: copying file `./ltmain.sh' |
| libtoolize: You should add the contents of the following files to `aclocal.m4': |
| libtoolize: `/usr/local/share/aclocal/libtool.m4' |
| libtoolize: `/usr/local/share/aclocal/ltversion.m4' |
| libtoolize: `/usr/local/share/aclocal/ltsugar.m4' |
| libtoolize: `/usr/local/share/aclocal/lt~obsolete.m4' |
| libtoolize: Consider adding `AC_CONFIG_MACRO_DIR([m4])' to configure.ac and |
| libtoolize: rerunning libtoolize, to keep the correct libtool macros in-tree. |
| libtoolize: Consider adding `-I m4' to ACLOCAL_AMFLAGS in Makefile.am. |
| ]]) |
| |
| LT_AT_CHECK_LIBTOOLIZE([--copy], 0, expout) |
| |
| |
| ## ----------------------------------------------------------------------- ## |
| ## Upgrading an aclocal maintained aclocal.m4 without AC_CONFIG_MACRO_DIR. ## |
| ## ----------------------------------------------------------------------- ## |
| |
| LT_AT_ACLOCAL([-I $abs_top_srcdir/libltdl/m4]) |
| |
| ## The following code is adapted (and simplified) from libtoolize.m4sh |
| #### |
| : ${GREP="grep"} |
| : ${SED="sed"} |
| |
| basename="s,^.*/,," |
| |
| # func_grep expression filename |
| # Check whether EXPRESSION matches any line of FILENAME, without output. |
| func_grep () |
| { |
| $GREP "$1" "$2" >/dev/null 2>&1 |
| } |
| |
| # func_serial filename [macro_regex] |
| # Output the value of the serial number comment in FILENAME, where the |
| # comment line must also match MACRO_REGEX, if given. |
| func_serial () |
| { |
| my_filename="$1" |
| my_macro_regex="$2" |
| my_sed_serial=' |
| /^# serial [1-9][0-9.]*[ ]*'"$my_macro_regex"'[ ]*$/ { |
| s,^# serial \([1-9][0-9.]*\).*$,\1, |
| q |
| } |
| d' |
| |
| # Search FILENAME and all the files it m4_includes for a serial number |
| # in the file that AC_DEFUNs MACRO_REGEX. |
| my_serial= |
| if test -z "$my_macro_regex" || |
| test "$my_filename" = aclocal.m4 || |
| test "$my_macro_regex" = `echo "$my_filename" | $SED "$basename"` || |
| func_grep '^AC_DEFUN(\@<:@'"$my_macro_regex" "$my_filename" |
| then |
| my_serial=`$SED -e "$my_sed_serial" "$my_filename"` |
| fi |
| |
| # If the file has no serial number, something is badly wrong! |
| test -n "$my_serial" || exit 1 |
| |
| echo $my_serial |
| } |
| |
| # Make the serial number in aclocal.m4 higher than installed ltoptions.m4, |
| # and the others match the macro files that libtoolize will compare against. |
| libtool_serial=`func_serial "$tst_aclocaldir/libtool.m4" LT_INIT` |
| ltversion_serial=`func_serial "$tst_aclocaldir/ltversion.m4" ltversion.m4` |
| ltsugar_serial=`func_serial "$tst_aclocaldir/ltsugar.m4" ltsugar.m4` |
| lt_obsolete_serial=`func_serial "$tst_aclocaldir/lt~obsolete.m4" lt~obsolete.m4` |
| $SED -e 's,^#.*serial.*ltoptions.m4$,# serial 99999 ltoptions.m4,' \ |
| -e "s,^#.*serial.*libtool.m4\$,# serial $libtool_serial libtool.m4," \ |
| -e "s,^#.*serial.*ltversion.m4\$,# serial $ltversion_serial ltversion.m4," \ |
| -e "s,^#.*serial.*ltsugar.m4\$,# serial $ltsugar_serial ltsugar.m4," \ |
| -e "s,^#.*serial.*lt~obsolete.m4\$,# serial $lt_obsolete_serial lt~obsolete.m4," \ |
| < aclocal.m4 > aclocal.m4t |
| mv -f aclocal.m4t aclocal.m4 |
| |
| AT_DATA([expout], |
| [[libtoolize: Consider adding `AC_CONFIG_MACRO_DIR([m4])' to configure.ac and |
| libtoolize: rerunning libtoolize, to keep the correct libtool macros in-tree. |
| libtoolize: Consider adding `-I m4' to ACLOCAL_AMFLAGS in Makefile.am. |
| ]]) |
| |
| LT_AT_CHECK_LIBTOOLIZE([--copy], 0, expout) |
| |
| |
| ## --------------------- ## |
| ## Now, a forced update. ## |
| ## --------------------- ## |
| |
| AT_DATA(expout, |
| [[libtoolize: putting auxiliary files in `.'. |
| libtoolize: copying file `./ltmain.sh' |
| libtoolize: Consider adding `AC_CONFIG_MACRO_DIR([m4])' to configure.ac and |
| libtoolize: rerunning libtoolize, to keep the correct libtool macros in-tree. |
| libtoolize: Consider adding `-I m4' to ACLOCAL_AMFLAGS in Makefile.am. |
| ]]) |
| |
| LT_AT_CHECK_LIBTOOLIZE([--copy --force], 0, expout) |
| |
| AT_CLEANUP |
| |
| |
| ## ------------------------------------------------------------- ## |
| ## Check nonrecursive ltdl puts m4 files in AC_CONFIG_MACRO_DIR. ## |
| ## ------------------------------------------------------------- ## |
| |
| AT_SETUP([nonrecursive ltdl with AC_CONFIG_MACRO_DIR]) |
| |
| AT_DATA(expout, |
| [[libtoolize: putting auxiliary files in AC_CONFIG_AUX_DIR, `build-aux'. |
| libtoolize: copying file `build-aux/config.guess' |
| libtoolize: copying file `build-aux/config.sub' |
| libtoolize: copying file `build-aux/install-sh' |
| libtoolize: copying file `build-aux/ltmain.sh' |
| libtoolize: putting macros in AC_CONFIG_MACRO_DIR, `m4'. |
| libtoolize: copying file `m4/argz.m4' |
| libtoolize: copying file `m4/libtool.m4' |
| libtoolize: copying file `m4/ltdl.m4' |
| libtoolize: copying file `m4/ltoptions.m4' |
| libtoolize: copying file `m4/ltsugar.m4' |
| libtoolize: copying file `m4/ltversion.m4' |
| libtoolize: copying file `m4/lt~obsolete.m4' |
| libtoolize: putting libltdl files in LT_CONFIG_LTDL_DIR, `ltdl'. |
| libtoolize: copying file `ltdl/COPYING.LIB' |
| libtoolize: copying file `ltdl/README' |
| libtoolize: copying file `ltdl/argz_.h' |
| libtoolize: copying file `ltdl/argz.c' |
| libtoolize: copying file `ltdl/loaders/dld_link.c' |
| libtoolize: copying file `ltdl/loaders/dlopen.c' |
| libtoolize: copying file `ltdl/loaders/dyld.c' |
| libtoolize: copying file `ltdl/loaders/load_add_on.c' |
| libtoolize: copying file `ltdl/loaders/loadlibrary.c' |
| libtoolize: copying file `ltdl/loaders/shl_load.c' |
| libtoolize: copying file `ltdl/lt__dirent.c' |
| libtoolize: copying file `ltdl/lt__strl.c' |
| libtoolize: copying file `ltdl/libltdl/lt__alloc.h' |
| libtoolize: copying file `ltdl/libltdl/lt__dirent.h' |
| libtoolize: copying file `ltdl/libltdl/lt__glibc.h' |
| libtoolize: copying file `ltdl/libltdl/lt__private.h' |
| libtoolize: copying file `ltdl/libltdl/lt__strl.h' |
| libtoolize: copying file `ltdl/libltdl/lt_dlloader.h' |
| libtoolize: copying file `ltdl/libltdl/lt_error.h' |
| libtoolize: copying file `ltdl/libltdl/lt_system.h' |
| libtoolize: copying file `ltdl/libltdl/slist.h' |
| libtoolize: copying file `ltdl/loaders/preopen.c' |
| libtoolize: copying file `ltdl/lt__alloc.c' |
| libtoolize: copying file `ltdl/lt_dlloader.c' |
| libtoolize: copying file `ltdl/lt_error.c' |
| libtoolize: copying file `ltdl/ltdl.c' |
| libtoolize: copying file `ltdl/ltdl.h' |
| libtoolize: copying file `ltdl/slist.c' |
| libtoolize: creating file `ltdl/Makefile.inc' |
| ]]) |
| |
| AT_DATA([configure.ac], |
| [[AC_INIT([libtoolize-demo], ]AT_PACKAGE_VERSION[, ]AT_PACKAGE_BUGREPORT[) |
| LT_CONFIG_LTDL_DIR([ltdl]) |
| AC_CONFIG_AUX_DIR([build-aux]) |
| AC_CONFIG_MACRO_DIR([m4]) |
| LT_INIT |
| LTDL_INIT([nonrecursive]) |
| AC_OUTPUT |
| ]]) |
| |
| AT_DATA([Makefile.am], |
| [[ACLOCAL_AMFLAGS = -I m4 |
| ]]) |
| |
| LT_AT_CHECK_LIBTOOLIZE([--copy --install --ltdl=ltdl], 0, expout) |
| |
| AT_CLEANUP |
| |
| |
| ## -------------------------------------------------------- ## |
| ## Check subproject ltdl with non-shared AC_CONFIG_.*_DIRs. ## |
| ## -------------------------------------------------------- ## |
| |
| AT_SETUP([subproject ltdl with non-shared directories]) |
| |
| AT_DATA(expout, |
| [[libtoolize: putting auxiliary files in AC_CONFIG_AUX_DIR, `build-aux'. |
| libtoolize: copying file `build-aux/config.guess' |
| libtoolize: copying file `build-aux/config.sub' |
| libtoolize: copying file `build-aux/install-sh' |
| libtoolize: copying file `build-aux/ltmain.sh' |
| libtoolize: putting auxiliary files in `build-aux'. |
| libtoolize: copying file `ltdl/config/compile' |
| libtoolize: copying file `ltdl/config/config.guess' |
| libtoolize: copying file `ltdl/config/config.sub' |
| libtoolize: copying file `ltdl/config/depcomp' |
| libtoolize: copying file `ltdl/config/install-sh' |
| libtoolize: copying file `ltdl/config/missing' |
| libtoolize: copying file `ltdl/config/ltmain.sh' |
| libtoolize: putting macros in AC_CONFIG_MACRO_DIR, `acm4'. |
| libtoolize: copying file `acm4/argz.m4' |
| libtoolize: copying file `acm4/libtool.m4' |
| libtoolize: copying file `acm4/ltdl.m4' |
| libtoolize: copying file `acm4/ltoptions.m4' |
| libtoolize: copying file `acm4/ltsugar.m4' |
| libtoolize: copying file `acm4/ltversion.m4' |
| libtoolize: copying file `acm4/lt~obsolete.m4' |
| libtoolize: putting macros in `ltdl/m4'. |
| libtoolize: copying file `ltdl/m4/argz.m4' |
| libtoolize: copying file `ltdl/m4/libtool.m4' |
| libtoolize: copying file `ltdl/m4/ltdl.m4' |
| libtoolize: copying file `ltdl/m4/ltoptions.m4' |
| libtoolize: copying file `ltdl/m4/ltsugar.m4' |
| libtoolize: copying file `ltdl/m4/ltversion.m4' |
| libtoolize: copying file `ltdl/m4/lt~obsolete.m4' |
| libtoolize: putting libltdl files in LT_CONFIG_LTDL_DIR, `ltdl'. |
| libtoolize: copying file `ltdl/COPYING.LIB' |
| libtoolize: copying file `ltdl/README' |
| libtoolize: copying file `ltdl/Makefile.am' |
| libtoolize: copying file `ltdl/configure.ac' |
| libtoolize: copying file `ltdl/aclocal.m4' |
| libtoolize: copying file `ltdl/Makefile.in' |
| libtoolize: copying file `ltdl/config-h.in' |
| libtoolize: copying file `ltdl/configure' |
| libtoolize: copying file `ltdl/argz_.h' |
| libtoolize: copying file `ltdl/argz.c' |
| libtoolize: copying file `ltdl/loaders/dld_link.c' |
| libtoolize: copying file `ltdl/loaders/dlopen.c' |
| libtoolize: copying file `ltdl/loaders/dyld.c' |
| libtoolize: copying file `ltdl/loaders/load_add_on.c' |
| libtoolize: copying file `ltdl/loaders/loadlibrary.c' |
| libtoolize: copying file `ltdl/loaders/shl_load.c' |
| libtoolize: copying file `ltdl/lt__dirent.c' |
| libtoolize: copying file `ltdl/lt__strl.c' |
| libtoolize: copying file `ltdl/libltdl/lt__alloc.h' |
| libtoolize: copying file `ltdl/libltdl/lt__dirent.h' |
| libtoolize: copying file `ltdl/libltdl/lt__glibc.h' |
| libtoolize: copying file `ltdl/libltdl/lt__private.h' |
| libtoolize: copying file `ltdl/libltdl/lt__strl.h' |
| libtoolize: copying file `ltdl/libltdl/lt_dlloader.h' |
| libtoolize: copying file `ltdl/libltdl/lt_error.h' |
| libtoolize: copying file `ltdl/libltdl/lt_system.h' |
| libtoolize: copying file `ltdl/libltdl/slist.h' |
| libtoolize: copying file `ltdl/loaders/preopen.c' |
| libtoolize: copying file `ltdl/lt__alloc.c' |
| libtoolize: copying file `ltdl/lt_dlloader.c' |
| libtoolize: copying file `ltdl/lt_error.c' |
| libtoolize: copying file `ltdl/ltdl.c' |
| libtoolize: copying file `ltdl/ltdl.h' |
| libtoolize: copying file `ltdl/slist.c' |
| libtoolize: Consider using `AC_CONFIG_AUX_DIR([ltdl/config])' in configure.ac. |
| libtoolize: Consider using `AC_CONFIG_MACRO_DIR([ltdl/m4])' in configure.ac. |
| libtoolize: Consider adding `-I ltdl/m4' to ACLOCAL_AMFLAGS in Makefile.am. |
| ]]) |
| |
| AT_DATA([configure.ac], |
| [[AC_INIT([libtoolize-demo], ]AT_PACKAGE_VERSION[, ]AT_PACKAGE_BUGREPORT[) |
| LT_CONFIG_LTDL_DIR([ltdl]) |
| AC_CONFIG_AUX_DIR([build-aux]) |
| AC_CONFIG_MACRO_DIR([acm4]) |
| LT_INIT |
| LTDL_INIT([subproject]) |
| AC_OUTPUT |
| ]]) |
| |
| LT_AT_CHECK_LIBTOOLIZE([--copy --install], 0, expout) |
| |
| AT_CLEANUP |
| |
| |
| ## --------------------------- ## |
| ## Garbled LIBTOOLIZE_OPTIONS. ## |
| ## --------------------------- ## |
| |
| AT_SETUP([LIBTOOLIZE_OPTIONS]) |
| |
| _LT_CONFIGURE_AC |
| |
| LIBTOOLIZE_OPTIONS="narf" |
| export LIBTOOLIZE_OPTIONS |
| |
| AT_DATA(experr, |
| [[libtoolize: garbled LIBTOOLIZE_OPTIONS near `narf' |
| libtoolize: Try `libtoolize --help' for more information. |
| ]]) |
| |
| LT_AT_CHECK_LIBTOOLIZE([--copy], 1, [ignore], experr) |
| |
| |
| ## --------------------------- ## |
| ## Unknown LIBTOOLIZE_OPTIONS. ## |
| ## --------------------------- ## |
| |
| LIBTOOLIZE_OPTIONS=--no-such-option |
| export LIBTOOLIZE_OPTIONS |
| |
| AT_DATA(experr, |
| [[libtoolize: warning: unrecognized environment option `--no-such-option' |
| ]]) |
| |
| LT_AT_CHECK_LIBTOOLIZE([--copy], 0, [ignore], experr) |
| |
| |
| ## ----------------------------- ## |
| ## --no-warn environment option. ## |
| ## ----------------------------- ## |
| |
| LIBTOOLIZE_OPTIONS=--no-warn,--no-such-option |
| export LIBTOOLIZE_OPTIONS |
| |
| AT_DATA(experr, [[]]) |
| |
| LT_AT_CHECK_LIBTOOLIZE([--copy], 0, [ignore], experr) |
| |
| AT_CLEANUP |
| |
| |
| ## ------------------------------------------------------ ## |
| ## Remove file droppings from old libtoolize invocations. ## |
| ## ------------------------------------------------------ ## |
| |
| AT_SETUP([cleanup old installation]) |
| |
| _LT_CONFIGURE_AC |
| |
| AT_DATA([Makefile.am], |
| [[ACLOCAL_AMFLAGS = -I m4 |
| ]]) |
| |
| AT_DATA([acinclude.m4], |
| [[AC_DEFUN([LT_INIT], |
| [: keep me, I might be hand maintained!]) # LT_INIT |
| ]]) |
| |
| AT_DATA([libltdl/acinclude.m4], |
| [[AC_DEFUN([LT_INIT], |
| [: delete me, I was left here by on old libltdl build]) # LT_INIT |
| ]]) |
| |
| LT_AT_CHECK_LIBTOOLIZE([--copy --force --ltdl], 0, [ignore]) |
| |
| # check files are left as expected |
| AT_CHECK([grep 'keep me' acinclude.m4], 0, [ignore]) |
| AT_CHECK([test -f libltdl/acinclude.m4], 1, [ignore], [ignore]) |
| |
| AT_CLEANUP |
| |