| adapter_khz 10000 | |
| interface ftdi | |
| ftdi_device_desc "Dual RS232-HS" | |
| ftdi_vid_pid 0x0403 0x6010 | |
| ftdi_layout_init 0x0008 0x001b | |
| ftdi_layout_signal nSRST -oe 0x0020 | |
| # ... | |
| set _CHIPNAME riscv | |
| jtag newtap $_CHIPNAME cpu -irlen 5 -expected-id 0x10e31913 | |
| set _TARGETNAME $_CHIPNAME.cpu | |
| target create $_TARGETNAME riscv -chain-position $_TARGETNAME | |
| $_TARGETNAME configure -work-area-phys 0x80000000 -work-area-size 8096 -work-area-backup 1 | |
| #-rtos riscv | |
| gdb_report_data_abort enable | |
| gdb_report_register_access_error enable | |
| # Expose an unimplemented CSR so we can test non-existent register access | |
| # behavior. | |
| riscv expose_csrs 2288 | |
| flash bank my_first_flash fespi 0x20000000 0 0 0 $_TARGETNAME | |
| init | |
| #reset | |
| halt | |
| flash protect 0 64 last off | |
| echo "Ready for Remote Connections" |