blob: 00ea3ce9d76180ea756bede436c3adbc78a6b600 [file] [log] [blame] [edit]
/*****************************************************************************
* McPAT/CACTI
* SOFTWARE LICENSE AGREEMENT
* Copyright 2012 Hewlett-Packard Development Company, L.P.
* Copyright (c) 2010-2013 Advanced Micro Devices, Inc.
* All Rights Reserved
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are
* met: redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer;
* redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution;
* neither the name of the copyright holders nor the names of its
* contributors may be used to endorse or promote products derived from
* this software without specific prior written permission.
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
***************************************************************************/
#include <cassert>
#include <cmath>
#include <iostream>
#include "basic_circuit.h"
#include "parameter.h"
uint32_t _log2(uint64_t num) {
uint32_t log2 = 0;
if (num == 0) {
std::cerr << "log0?" << std::endl;
exit(1);
}
while (num > 1) {
num = (num >> 1);
log2++;
}
return log2;
}
bool is_pow2(int64_t val) {
if (val <= 0) {
return false;
} else if (val == 1) {
return true;
} else {
return (_log2(val) != _log2(val - 1));
}
}
int powers (int base, int n) {
int i, p;
p = 1;
for (i = 1; i <= n; ++i)
p *= base;
return p;
}
/*----------------------------------------------------------------------*/
double logtwo (double x) {
assert(x > 0);
return ((double) (log (x) / log (2.0)));
}
/*----------------------------------------------------------------------*/
double gate_C(
double width,
double wirelength,
bool _is_dram,
bool _is_cell,
bool _is_wl_tr) {
const TechnologyParameter::DeviceType * dt;
if (_is_dram && _is_cell) {
dt = &g_tp.dram_acc; //DRAM cell access transistor
} else if (_is_dram && _is_wl_tr) {
dt = &g_tp.dram_wl; //DRAM wordline transistor
} else if (!_is_dram && _is_cell) {
dt = &g_tp.sram_cell; // SRAM cell access transistor
} else {
dt = &g_tp.peri_global;
}
return (dt->C_g_ideal + dt->C_overlap + 3*dt->C_fringe)*width + dt->l_phy*Cpolywire;
}
// returns gate capacitance in Farads
// actually this function is the same as gate_C() now
double gate_C_pass(
double width, // gate width in um (length is Lphy_periph_global)
double wirelength, // poly wire length going to gate in lambda
bool _is_dram,
bool _is_cell,
bool _is_wl_tr) {
// v5.0
const TechnologyParameter::DeviceType * dt;
if ((_is_dram) && (_is_cell)) {
dt = &g_tp.dram_acc; //DRAM cell access transistor
} else if ((_is_dram) && (_is_wl_tr)) {
dt = &g_tp.dram_wl; //DRAM wordline transistor
} else if ((!_is_dram) && _is_cell) {
dt = &g_tp.sram_cell; // SRAM cell access transistor
} else {
dt = &g_tp.peri_global;
}
return (dt->C_g_ideal + dt->C_overlap + 3*dt->C_fringe)*width + dt->l_phy*Cpolywire;
}
double drain_C_(
double width,
int nchannel,
int stack,
int next_arg_thresh_folding_width_or_height_cell,
double fold_dimension,
bool _is_dram,
bool _is_cell,
bool _is_wl_tr) {
double w_folded_tr;
const TechnologyParameter::DeviceType * dt;
if ((_is_dram) && (_is_cell)) {
dt = &g_tp.dram_acc; // DRAM cell access transistor
} else if ((_is_dram) && (_is_wl_tr)) {
dt = &g_tp.dram_wl; // DRAM wordline transistor
} else if ((!_is_dram) && _is_cell) {
dt = &g_tp.sram_cell; // SRAM cell access transistor
} else {
dt = &g_tp.peri_global;
}
double c_junc_area = dt->C_junc;
double c_junc_sidewall = dt->C_junc_sidewall;
double c_fringe = 2 * dt->C_fringe;
double c_overlap = 2 * dt->C_overlap;
double drain_C_metal_connecting_folded_tr = 0;
// determine the width of the transistor after folding (if it is getting folded)
if (next_arg_thresh_folding_width_or_height_cell == 0) {
// interpret fold_dimension as the the folding width threshold
// i.e. the value of transistor width above which the transistor gets folded
w_folded_tr = fold_dimension;
} else { // interpret fold_dimension as the height of the cell that this transistor is part of.
double h_tr_region = fold_dimension - 2 * g_tp.HPOWERRAIL;
// TODO : w_folded_tr must come from Component::compute_gate_area()
double ratio_p_to_n = 2.0 / (2.0 + 1.0);
if (nchannel) {
w_folded_tr = (1 - ratio_p_to_n) * (h_tr_region - g_tp.MIN_GAP_BET_P_AND_N_DIFFS);
} else {
w_folded_tr = ratio_p_to_n * (h_tr_region - g_tp.MIN_GAP_BET_P_AND_N_DIFFS);
}
}
int num_folded_tr = (int) (ceil(width / w_folded_tr));
if (num_folded_tr < 2) {
w_folded_tr = width;
}
double total_drain_w = (g_tp.w_poly_contact + 2 * g_tp.spacing_poly_to_contact) + // only for drain
(stack - 1) * g_tp.spacing_poly_to_poly;
double drain_h_for_sidewall = w_folded_tr;
double total_drain_height_for_cap_wrt_gate = w_folded_tr + 2 * w_folded_tr * (stack - 1);
if (num_folded_tr > 1) {
total_drain_w += (num_folded_tr - 2) * (g_tp.w_poly_contact + 2 * g_tp.spacing_poly_to_contact) +
(num_folded_tr - 1) * ((stack - 1) * g_tp.spacing_poly_to_poly);
if (num_folded_tr % 2 == 0) {
drain_h_for_sidewall = 0;
}
total_drain_height_for_cap_wrt_gate *= num_folded_tr;
drain_C_metal_connecting_folded_tr = g_tp.wire_local.C_per_um * total_drain_w;
}
double drain_C_area = c_junc_area * total_drain_w * w_folded_tr;
double drain_C_sidewall = c_junc_sidewall * (drain_h_for_sidewall + 2 * total_drain_w);
double drain_C_wrt_gate = (c_fringe + c_overlap) * total_drain_height_for_cap_wrt_gate;
return (drain_C_area + drain_C_sidewall + drain_C_wrt_gate + drain_C_metal_connecting_folded_tr);
}
double tr_R_on(
double width,
int nchannel,
int stack,
bool _is_dram,
bool _is_cell,
bool _is_wl_tr) {
const TechnologyParameter::DeviceType * dt;
if ((_is_dram) && (_is_cell)) {
dt = &g_tp.dram_acc; //DRAM cell access transistor
} else if ((_is_dram) && (_is_wl_tr)) {
dt = &g_tp.dram_wl; //DRAM wordline transistor
} else if ((!_is_dram) && _is_cell) {
dt = &g_tp.sram_cell; // SRAM cell access transistor
} else {
dt = &g_tp.peri_global;
}
double restrans = (nchannel) ? dt->R_nch_on : dt->R_pch_on;
return (stack * restrans / width);
}
/* This routine operates in reverse: given a resistance, it finds
* the transistor width that would have this R. It is used in the
* data wordline to estimate the wordline driver size. */
// returns width in um
double R_to_w(
double res,
int nchannel,
bool _is_dram,
bool _is_cell,
bool _is_wl_tr) {
const TechnologyParameter::DeviceType * dt;
if ((_is_dram) && (_is_cell)) {
dt = &g_tp.dram_acc; //DRAM cell access transistor
} else if ((_is_dram) && (_is_wl_tr)) {
dt = &g_tp.dram_wl; //DRAM wordline transistor
} else if ((!_is_dram) && (_is_cell)) {
dt = &g_tp.sram_cell; // SRAM cell access transistor
} else {
dt = &g_tp.peri_global;
}
double restrans = (nchannel) ? dt->R_nch_on : dt->R_pch_on;
return (restrans / res);
}
double pmos_to_nmos_sz_ratio(
bool _is_dram,
bool _is_wl_tr) {
double p_to_n_sizing_ratio;
if ((_is_dram) && (_is_wl_tr)) { //DRAM wordline transistor
p_to_n_sizing_ratio = g_tp.dram_wl.n_to_p_eff_curr_drv_ratio;
} else { //DRAM or SRAM all other transistors
p_to_n_sizing_ratio = g_tp.peri_global.n_to_p_eff_curr_drv_ratio;
}
return p_to_n_sizing_ratio;
}
// "Timing Models for MOS Circuits" by Mark Horowitz, 1984
double horowitz(
double inputramptime, // input rise time
double tf, // time constant of gate
double vs1, // threshold voltage
double vs2, // threshold voltage
int rise) { // whether input rises or fall
if (inputramptime == 0 && vs1 == vs2) {
return tf * (vs1 < 1 ? -log(vs1) : log(vs1));
}
double a, b, td;
a = inputramptime / tf;
if (rise == RISE) {
b = 0.5;
td = tf * sqrt(log(vs1) * log(vs1) + 2 * a * b * (1.0 - vs1)) +
tf * (log(vs1) - log(vs2));
} else {
b = 0.4;
td = tf * sqrt(log(1.0 - vs1) * log(1.0 - vs1) + 2 * a * b * (vs1)) +
tf * (log(1.0 - vs1) - log(1.0 - vs2));
}
return (td);
}
double cmos_Ileak(
double nWidth,
double pWidth,
bool _is_dram,
bool _is_cell,
bool _is_wl_tr) {
TechnologyParameter::DeviceType * dt;
if ((!_is_dram) && (_is_cell)) { //SRAM cell access transistor
dt = &(g_tp.sram_cell);
} else if ((_is_dram) && (_is_wl_tr)) { //DRAM wordline transistor
dt = &(g_tp.dram_wl);
} else { //DRAM or SRAM all other transistors
dt = &(g_tp.peri_global);
}
return nWidth*dt->I_off_n + pWidth*dt->I_off_p;
}
double simplified_nmos_leakage(
double nwidth,
bool _is_dram,
bool _is_cell,
bool _is_wl_tr) {
TechnologyParameter::DeviceType * dt;
if ((!_is_dram) && (_is_cell)) { //SRAM cell access transistor
dt = &(g_tp.sram_cell);
} else if ((_is_dram) && (_is_wl_tr)) { //DRAM wordline transistor
dt = &(g_tp.dram_wl);
} else { //DRAM or SRAM all other transistors
dt = &(g_tp.peri_global);
}
return nwidth * dt->I_off_n;
}
int factorial(int n, int m) {
int fa = m, i;
for (i = m + 1; i <= n; i++)
fa *= i;
return fa;
}
int combination(int n, int m) {
int ret;
ret = factorial(n, m + 1) / factorial(n - m);
return ret;
}
double simplified_pmos_leakage(
double pwidth,
bool _is_dram,
bool _is_cell,
bool _is_wl_tr) {
TechnologyParameter::DeviceType * dt;
if ((!_is_dram) && (_is_cell)) { //SRAM cell access transistor
dt = &(g_tp.sram_cell);
} else if ((_is_dram) && (_is_wl_tr)) { //DRAM wordline transistor
dt = &(g_tp.dram_wl);
} else { //DRAM or SRAM all other transistors
dt = &(g_tp.peri_global);
}
return pwidth * dt->I_off_p;
}
double cmos_Ig_n(
double nWidth,
bool _is_dram,
bool _is_cell,
bool _is_wl_tr) {
TechnologyParameter::DeviceType * dt;
if ((!_is_dram) && (_is_cell)) { //SRAM cell access transistor
dt = &(g_tp.sram_cell);
} else if ((_is_dram) && (_is_wl_tr)) { //DRAM wordline transistor
dt = &(g_tp.dram_wl);
} else { //DRAM or SRAM all other transistors
dt = &(g_tp.peri_global);
}
return nWidth*dt->I_g_on_n;
}
double cmos_Ig_p(
double pWidth,
bool _is_dram,
bool _is_cell,
bool _is_wl_tr) {
TechnologyParameter::DeviceType * dt;
if ((!_is_dram) && (_is_cell)) { //SRAM cell access transistor
dt = &(g_tp.sram_cell);
} else if ((_is_dram) && (_is_wl_tr)) { //DRAM wordline transistor
dt = &(g_tp.dram_wl);
} else { //DRAM or SRAM all other transistors
dt = &(g_tp.peri_global);
}
return pWidth*dt->I_g_on_p;
}
double cmos_Isub_leakage(
double nWidth,
double pWidth,
int fanin,
enum Gate_type g_type,
bool _is_dram,
bool _is_cell,
bool _is_wl_tr,
enum Half_net_topology topo) {
assert (fanin >= 1);
double nmos_leak = simplified_nmos_leakage(nWidth, _is_dram, _is_cell, _is_wl_tr);
double pmos_leak = simplified_pmos_leakage(pWidth, _is_dram, _is_cell, _is_wl_tr);
double Isub = 0;
int num_states;
int num_off_tx;
num_states = int(pow(2.0, fanin));
switch (g_type) {
case nmos:
if (fanin == 1) {
Isub = nmos_leak / num_states;
} else {
if (topo == parallel) {
//only when all tx are off, leakage power is non-zero.
//The possibility of this state is 1/num_states
Isub = nmos_leak * fanin / num_states;
} else {
for (num_off_tx = 1; num_off_tx <= fanin; num_off_tx++) {
//when num_off_tx ==0 there is no leakage power
Isub += nmos_leak * pow(UNI_LEAK_STACK_FACTOR,
(num_off_tx - 1)) *
combination(fanin, num_off_tx);
}
Isub /= num_states;
}
}
break;
case pmos:
if (fanin == 1) {
Isub = pmos_leak / num_states;
} else {
if (topo == parallel) {
//only when all tx are off, leakage power is non-zero.
//The possibility of this state is 1/num_states
Isub = pmos_leak * fanin / num_states;
} else {
for (num_off_tx = 1; num_off_tx <= fanin; num_off_tx++) {
//when num_off_tx ==0 there is no leakage power
Isub += pmos_leak * pow(UNI_LEAK_STACK_FACTOR,
(num_off_tx - 1)) *
combination(fanin, num_off_tx);
}
Isub /= num_states;
}
}
break;
case inv:
Isub = (nmos_leak + pmos_leak) / 2;
break;
case nand:
Isub += fanin * pmos_leak;//the pullup network
for (num_off_tx = 1; num_off_tx <= fanin; num_off_tx++) {
// the pulldown network
Isub += nmos_leak * pow(UNI_LEAK_STACK_FACTOR,
(num_off_tx - 1)) *
combination(fanin, num_off_tx);
}
Isub /= num_states;
break;
case nor:
for (num_off_tx = 1; num_off_tx <= fanin; num_off_tx++) {
// the pullup network
Isub += pmos_leak * pow(UNI_LEAK_STACK_FACTOR,
(num_off_tx - 1)) *
combination(fanin, num_off_tx);
}
Isub += fanin * nmos_leak;//the pulldown network
Isub /= num_states;
break;
case tri:
Isub += (nmos_leak + pmos_leak) / 2;//enabled
//disabled upper bound of leakage power
Isub += nmos_leak * UNI_LEAK_STACK_FACTOR;
Isub /= 2;
break;
case tg:
Isub = (nmos_leak + pmos_leak) / 2;
break;
default:
assert(0);
break;
}
return Isub;
}
double cmos_Ig_leakage(
double nWidth,
double pWidth,
int fanin,
enum Gate_type g_type,
bool _is_dram,
bool _is_cell,
bool _is_wl_tr,
enum Half_net_topology topo) {
assert (fanin >= 1);
double nmos_leak = cmos_Ig_n(nWidth, _is_dram, _is_cell, _is_wl_tr);
double pmos_leak = cmos_Ig_p(pWidth, _is_dram, _is_cell, _is_wl_tr);
double Ig_on = 0;
int num_states;
int num_on_tx;
num_states = int(pow(2.0, fanin));
switch (g_type) {
case nmos:
if (fanin == 1) {
Ig_on = nmos_leak / num_states;
} else {
if (topo == parallel) {
for (num_on_tx = 1; num_on_tx <= fanin; num_on_tx++) {
Ig_on += nmos_leak * combination(fanin, num_on_tx) *
num_on_tx;
}
} else {
//pull down network when all TXs are on.
Ig_on += nmos_leak * fanin;
//num_on_tx is the number of on tx
for (num_on_tx = 1; num_on_tx < fanin; num_on_tx++) {
//when num_on_tx=[1,n-1]
//TODO: this is a approximation now, a precise computation
//will be very complicated.
Ig_on += nmos_leak * combination(fanin, num_on_tx) *
num_on_tx / 2;
}
Ig_on /= num_states;
}
}
break;
case pmos:
if (fanin == 1) {
Ig_on = pmos_leak / num_states;
} else {
if (topo == parallel) {
for (num_on_tx = 1; num_on_tx <= fanin; num_on_tx++) {
Ig_on += pmos_leak * combination(fanin, num_on_tx) *
num_on_tx;
}
} else {
//pull down network when all TXs are on.
Ig_on += pmos_leak * fanin;
//num_on_tx is the number of on tx
for (num_on_tx = 1; num_on_tx < fanin; num_on_tx++) {
//when num_on_tx=[1,n-1]
//TODO: this is a approximation now, a precise computation
//will be very complicated.
Ig_on += pmos_leak * combination(fanin, num_on_tx) *
num_on_tx / 2;
}
Ig_on /= num_states;
}
}
break;
case inv:
Ig_on = (nmos_leak + pmos_leak) / 2;
break;
case nand:
//pull up network
//when num_on_tx=[1,n]
for (num_on_tx = 1; num_on_tx <= fanin; num_on_tx++) {
Ig_on += pmos_leak * combination(fanin, num_on_tx) * num_on_tx;
}
//pull down network
Ig_on += nmos_leak * fanin;//pull down network when all TXs are on.
//num_on_tx is the number of on tx
for (num_on_tx = 1; num_on_tx < fanin; num_on_tx++) {
//when num_on_tx=[1,n-1]
//TODO: this is a approximation now, a precise computation will be
//very complicated.
Ig_on += nmos_leak * combination(fanin, num_on_tx) * num_on_tx / 2;
}
Ig_on /= num_states;
break;
case nor:
// num_on_tx is the number of on tx in pull up network
Ig_on += pmos_leak * fanin;//pull up network when all TXs are on.
for (num_on_tx = 1; num_on_tx < fanin; num_on_tx++) {
Ig_on += pmos_leak * combination(fanin, num_on_tx) * num_on_tx / 2;
}
//pull down network
for (num_on_tx = 1; num_on_tx <= fanin; num_on_tx++) {
//when num_on_tx=[1,n]
Ig_on += nmos_leak * combination(fanin, num_on_tx) * num_on_tx;
}
Ig_on /= num_states;
break;
case tri:
Ig_on += (2 * nmos_leak + 2 * pmos_leak) / 2;//enabled
//disabled upper bound of leakage power
Ig_on += (nmos_leak + pmos_leak) / 2;
Ig_on /= 2;
break;
case tg:
Ig_on = (nmos_leak + pmos_leak) / 2;
break;
default:
assert(0);
break;
}
return Ig_on;
}
double shortcircuit_simple(
double vt,
double velocity_index,
double c_in,
double c_out,
double w_nmos,
double w_pmos,
double i_on_n,
double i_on_p,
double i_on_n_in,
double i_on_p_in,
double vdd) {
double p_short_circuit, p_short_circuit_discharge, p_short_circuit_charge, p_short_circuit_discharge_low, p_short_circuit_discharge_high, p_short_circuit_charge_low, p_short_circuit_charge_high; //this is actually energy
double fo_n, fo_p, fanout, beta_ratio, vt_to_vdd_ratio;
fo_n = i_on_n / i_on_n_in;
fo_p = i_on_p / i_on_p_in;
fanout = c_out / c_in;
beta_ratio = i_on_p / i_on_n;
vt_to_vdd_ratio = vt / vdd;
//p_short_circuit_discharge_low = 10/3*(pow(0.5-vt_to_vdd_ratio,3.0)/pow(velocity_index,2.0)/pow(2.0,3*vt_to_vdd_ratio*vt_to_vdd_ratio))*c_in*vdd*vdd*fo_p*fo_p/fanout/beta_ratio;
p_short_circuit_discharge_low =
10 / 3 * (pow(((vdd - vt) - vt_to_vdd_ratio), 3.0) /
pow(velocity_index, 2.0) / pow(2.0, 3 * vt_to_vdd_ratio *
vt_to_vdd_ratio)) * c_in *
vdd * vdd * fo_p * fo_p / fanout / beta_ratio;
p_short_circuit_charge_low =
10 / 3 * (pow(((vdd - vt) - vt_to_vdd_ratio), 3.0) /
pow(velocity_index, 2.0) / pow(2.0, 3 * vt_to_vdd_ratio *
vt_to_vdd_ratio)) * c_in *
vdd * vdd * fo_n * fo_n / fanout * beta_ratio;
// double t1, t2, t3, t4, t5;
// t1=pow(((vdd-vt)-vt_to_vdd_ratio),3);
// t2=pow(velocity_index,2.0);
// t3=pow(2.0,3*vt_to_vdd_ratio*vt_to_vdd_ratio);
// t4=t1/t2/t3;
// cout <<t1<<"t1\n"<<t2<<"t2\n"<<t3<<"t3\n"<<t4<<"t4\n"<<fanout<<endl;
p_short_circuit_discharge_high =
pow(((vdd - vt) - vt_to_vdd_ratio), 1.5) * c_in * vdd * vdd *
fo_p / 10 / pow(2, 3 * vt_to_vdd_ratio + 2 * velocity_index);
p_short_circuit_charge_high = pow(((vdd - vt) - vt_to_vdd_ratio), 1.5) *
c_in * vdd * vdd * fo_n / 10 / pow(2, 3 * vt_to_vdd_ratio + 2 *
velocity_index);
// t1=pow(((vdd-vt)-vt_to_vdd_ratio),1.5);
// t2=pow(2, 3*vt_to_vdd_ratio+2*velocity_index);
// t3=t1/t2;
// cout <<t1<<"t1\n"<<t2<<"t2\n"<<t3<<"t3\n"<<t4<<"t4\n"<<fanout<<endl;
// p_short_circuit_discharge = 1.0/(1.0/p_short_circuit_discharge_low + 1.0/p_short_circuit_discharge_high);
// p_short_circuit_charge = 1/(1/p_short_circuit_charge_low + 1/p_short_circuit_charge_high); //harmmoic mean cannot be applied simple formulas.
p_short_circuit_discharge = p_short_circuit_discharge_low;
p_short_circuit_charge = p_short_circuit_charge_low;
p_short_circuit = (p_short_circuit_discharge + p_short_circuit_charge) / 2;
return (p_short_circuit);
}
double shortcircuit(
double vt,
double velocity_index,
double c_in,
double c_out,
double w_nmos,
double w_pmos,
double i_on_n,
double i_on_p,
double i_on_n_in,
double i_on_p_in,
double vdd) {
//this is actually energy
double p_short_circuit = 0, p_short_circuit_discharge;
double fo_n, fo_p, fanout, beta_ratio, vt_to_vdd_ratio;
double f_alpha, k_v, e, g_v_alpha, h_v_alpha;
fo_n = i_on_n / i_on_n_in;
fo_p = i_on_p / i_on_p_in;
fanout = 1;
beta_ratio = i_on_p / i_on_n;
vt_to_vdd_ratio = vt / vdd;
e = 2.71828;
f_alpha = 1 / (velocity_index + 2) - velocity_index /
(2 * (velocity_index + 3)) + velocity_index / (velocity_index + 4) *
(velocity_index / 2 - 1);
k_v = 0.9 / 0.8 + (vdd - vt) / 0.8 * log(10 * (vdd - vt) / e);
g_v_alpha = (velocity_index + 1) *
pow((1 - velocity_index), velocity_index) *
pow((1 - velocity_index), velocity_index / 2) / f_alpha /
pow((1 - velocity_index - velocity_index),
(velocity_index / 2 + velocity_index + 2));
h_v_alpha = pow(2, velocity_index) * (velocity_index + 1) *
pow((1 - velocity_index), velocity_index) /
pow((1 - velocity_index - velocity_index), (velocity_index + 1));
//p_short_circuit_discharge_low = 10/3*(pow(0.5-vt_to_vdd_ratio,3.0)/pow(velocity_index,2.0)/pow(2.0,3*vt_to_vdd_ratio*vt_to_vdd_ratio))*c_in*vdd*vdd*fo_p*fo_p/fanout/beta_ratio;
// p_short_circuit_discharge_low = 10/3*(pow(((vdd-vt)-vt_to_vdd_ratio),3.0)/pow(velocity_index,2.0)/pow(2.0,3*vt_to_vdd_ratio*vt_to_vdd_ratio))*c_in*vdd*vdd*fo_p*fo_p/fanout/beta_ratio;
// p_short_circuit_charge_low = 10/3*(pow(((vdd-vt)-vt_to_vdd_ratio),3.0)/pow(velocity_index,2.0)/pow(2.0,3*vt_to_vdd_ratio*vt_to_vdd_ratio))*c_in*vdd*vdd*fo_n*fo_n/fanout*beta_ratio;
// double t1, t2, t3, t4, t5;
// t1=pow(((vdd-vt)-vt_to_vdd_ratio),3);
// t2=pow(velocity_index,2.0);
// t3=pow(2.0,3*vt_to_vdd_ratio*vt_to_vdd_ratio);
// t4=t1/t2/t3;
//
// cout <<t1<<"t1\n"<<t2<<"t2\n"<<t3<<"t3\n"<<t4<<"t4\n"<<fanout<<endl;
//
//
// p_short_circuit_discharge_high = pow(((vdd-vt)-vt_to_vdd_ratio),1.5)*c_in*vdd*vdd*fo_p/10/pow(2, 3*vt_to_vdd_ratio+2*velocity_index);
// p_short_circuit_charge_high = pow(((vdd-vt)-vt_to_vdd_ratio),1.5)*c_in*vdd*vdd*fo_n/10/pow(2, 3*vt_to_vdd_ratio+2*velocity_index);
//
// p_short_circuit_discharge = 1.0/(1.0/p_short_circuit_discharge_low + 1.0/p_short_circuit_discharge_high);
// p_short_circuit_charge = 1/(1/p_short_circuit_charge_low + 1/p_short_circuit_charge_high);
//
// p_short_circuit = (p_short_circuit_discharge + p_short_circuit_charge)/2;
//
// p_short_circuit = p_short_circuit_discharge;
p_short_circuit_discharge = k_v * vdd * vdd * c_in * fo_p * fo_p /
((vdd - vt) * g_v_alpha * fanout * beta_ratio / 2 / k_v + h_v_alpha *
fo_p);
return (p_short_circuit);
}