| /* |
| * Copyright (c) 2010-2020 ARM Limited |
| * All rights reserved |
| * |
| * The license below extends only to copyright in the software and shall |
| * not be construed as granting a license to any other intellectual |
| * property including but not limited to intellectual property relating |
| * to a hardware implementation of the functionality of the software |
| * licensed hereunder. You may use the software subject to the license |
| * terms below provided that you ensure that this notice is replicated |
| * unmodified and in its entirety in all distributions of the software, |
| * modified or unmodified, in source code or in binary form. |
| * |
| * Copyright (c) 2013 Amin Farmahini-Farahani |
| * All rights reserved. |
| * |
| * Redistribution and use in source and binary forms, with or without |
| * modification, are permitted provided that the following conditions are |
| * met: redistributions of source code must retain the above copyright |
| * notice, this list of conditions and the following disclaimer; |
| * redistributions in binary form must reproduce the above copyright |
| * notice, this list of conditions and the following disclaimer in the |
| * documentation and/or other materials provided with the distribution; |
| * neither the name of the copyright holders nor the names of its |
| * contributors may be used to endorse or promote products derived from |
| * this software without specific prior written permission. |
| * |
| * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS |
| * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT |
| * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR |
| * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT |
| * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, |
| * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT |
| * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, |
| * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY |
| * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT |
| * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE |
| * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. |
| */ |
| |
| #include "mem/dram_interface.hh" |
| |
| #include "base/bitfield.hh" |
| #include "base/cprintf.hh" |
| #include "base/trace.hh" |
| #include "debug/DRAM.hh" |
| #include "debug/DRAMPower.hh" |
| #include "debug/DRAMState.hh" |
| #include "sim/system.hh" |
| |
| namespace gem5 |
| { |
| |
| using namespace Data; |
| |
| namespace memory |
| { |
| |
| std::pair<MemPacketQueue::iterator, Tick> |
| DRAMInterface::chooseNextFRFCFS(MemPacketQueue& queue, Tick min_col_at) const |
| { |
| std::vector<uint32_t> earliest_banks(ranksPerChannel, 0); |
| |
| // Has minBankPrep been called to populate earliest_banks? |
| bool filled_earliest_banks = false; |
| // can the PRE/ACT sequence be done without impacting utlization? |
| bool hidden_bank_prep = false; |
| |
| // search for seamless row hits first, if no seamless row hit is |
| // found then determine if there are other packets that can be issued |
| // without incurring additional bus delay due to bank timing |
| // Will select closed rows first to enable more open row possibilies |
| // in future selections |
| bool found_hidden_bank = false; |
| |
| // remember if we found a row hit, not seamless, but bank prepped |
| // and ready |
| bool found_prepped_pkt = false; |
| |
| // if we have no row hit, prepped or not, and no seamless packet, |
| // just go for the earliest possible |
| bool found_earliest_pkt = false; |
| |
| Tick selected_col_at = MaxTick; |
| auto selected_pkt_it = queue.end(); |
| |
| for (auto i = queue.begin(); i != queue.end() ; ++i) { |
| MemPacket* pkt = *i; |
| |
| // select optimal DRAM packet in Q |
| if (pkt->isDram() && (pkt->pseudoChannel == pseudoChannel)) { |
| const Bank& bank = ranks[pkt->rank]->banks[pkt->bank]; |
| const Tick col_allowed_at = pkt->isRead() ? bank.rdAllowedAt : |
| bank.wrAllowedAt; |
| |
| DPRINTF(DRAM, "%s checking DRAM packet in bank %d, row %d\n", |
| __func__, pkt->bank, pkt->row); |
| |
| // check if rank is not doing a refresh and thus is available, |
| // if not, jump to the next packet |
| if (burstReady(pkt)) { |
| |
| DPRINTF(DRAM, |
| "%s bank %d - Rank %d available\n", __func__, |
| pkt->bank, pkt->rank); |
| |
| // check if it is a row hit |
| if (bank.openRow == pkt->row) { |
| // no additional rank-to-rank or same bank-group |
| // delays, or we switched read/write and might as well |
| // go for the row hit |
| if (col_allowed_at <= min_col_at) { |
| // FCFS within the hits, giving priority to |
| // commands that can issue seamlessly, without |
| // additional delay, such as same rank accesses |
| // and/or different bank-group accesses |
| DPRINTF(DRAM, "%s Seamless buffer hit\n", __func__); |
| selected_pkt_it = i; |
| selected_col_at = col_allowed_at; |
| // no need to look through the remaining queue entries |
| break; |
| } else if (!found_hidden_bank && !found_prepped_pkt) { |
| // if we did not find a packet to a closed row that can |
| // issue the bank commands without incurring delay, and |
| // did not yet find a packet to a prepped row, remember |
| // the current one |
| selected_pkt_it = i; |
| selected_col_at = col_allowed_at; |
| found_prepped_pkt = true; |
| DPRINTF(DRAM, "%s Prepped row buffer hit\n", __func__); |
| } |
| } else if (!found_earliest_pkt) { |
| // if we have not initialised the bank status, do it |
| // now, and only once per scheduling decisions |
| if (!filled_earliest_banks) { |
| // determine entries with earliest bank delay |
| std::tie(earliest_banks, hidden_bank_prep) = |
| minBankPrep(queue, min_col_at); |
| filled_earliest_banks = true; |
| } |
| |
| // bank is amongst first available banks |
| // minBankPrep will give priority to packets that can |
| // issue seamlessly |
| if (bits(earliest_banks[pkt->rank], |
| pkt->bank, pkt->bank)) { |
| found_earliest_pkt = true; |
| found_hidden_bank = hidden_bank_prep; |
| |
| // give priority to packets that can issue |
| // bank commands 'behind the scenes' |
| // any additional delay if any will be due to |
| // col-to-col command requirements |
| if (hidden_bank_prep || !found_prepped_pkt) { |
| selected_pkt_it = i; |
| selected_col_at = col_allowed_at; |
| } |
| } |
| } |
| } else { |
| DPRINTF(DRAM, "%s bank %d - Rank %d not available\n", __func__, |
| pkt->bank, pkt->rank); |
| } |
| } |
| } |
| |
| if (selected_pkt_it == queue.end()) { |
| DPRINTF(DRAM, "%s no available DRAM ranks found\n", __func__); |
| } |
| |
| return std::make_pair(selected_pkt_it, selected_col_at); |
| } |
| |
| void |
| DRAMInterface::activateBank(Rank& rank_ref, Bank& bank_ref, |
| Tick act_tick, uint32_t row) |
| { |
| assert(rank_ref.actTicks.size() == activationLimit); |
| |
| // verify that we have command bandwidth to issue the activate |
| // if not, shift to next burst window |
| Tick act_at; |
| if (twoCycleActivate) |
| act_at = ctrl->verifyMultiCmd(act_tick, maxCommandsPerWindow, tAAD); |
| else |
| act_at = ctrl->verifySingleCmd(act_tick, maxCommandsPerWindow, true); |
| |
| DPRINTF(DRAM, "Activate at tick %d\n", act_at); |
| |
| // update the open row |
| assert(bank_ref.openRow == Bank::NO_ROW); |
| bank_ref.openRow = row; |
| |
| // start counting anew, this covers both the case when we |
| // auto-precharged, and when this access is forced to |
| // precharge |
| bank_ref.bytesAccessed = 0; |
| bank_ref.rowAccesses = 0; |
| |
| ++rank_ref.numBanksActive; |
| assert(rank_ref.numBanksActive <= banksPerRank); |
| |
| DPRINTF(DRAM, "Activate bank %d, rank %d at tick %lld, now got " |
| "%d active\n", bank_ref.bank, rank_ref.rank, act_at, |
| ranks[rank_ref.rank]->numBanksActive); |
| |
| rank_ref.cmdList.push_back(Command(MemCommand::ACT, bank_ref.bank, |
| act_at)); |
| |
| DPRINTF(DRAMPower, "%llu,ACT,%d,%d\n", divCeil(act_at, tCK) - |
| timeStampOffset, bank_ref.bank, rank_ref.rank); |
| |
| // The next access has to respect tRAS for this bank |
| bank_ref.preAllowedAt = act_at + tRAS; |
| |
| // Respect the row-to-column command delay for both read and write cmds |
| bank_ref.rdAllowedAt = std::max(act_at + tRCD_RD, bank_ref.rdAllowedAt); |
| bank_ref.wrAllowedAt = std::max(act_at + tRCD_WR, bank_ref.wrAllowedAt); |
| |
| // start by enforcing tRRD |
| for (int i = 0; i < banksPerRank; i++) { |
| // next activate to any bank in this rank must not happen |
| // before tRRD |
| if (bankGroupArch && (bank_ref.bankgr == rank_ref.banks[i].bankgr)) { |
| // bank group architecture requires longer delays between |
| // ACT commands within the same bank group. Use tRRD_L |
| // in this case |
| rank_ref.banks[i].actAllowedAt = std::max(act_at + tRRD_L, |
| rank_ref.banks[i].actAllowedAt); |
| } else { |
| // use shorter tRRD value when either |
| // 1) bank group architecture is not supportted |
| // 2) bank is in a different bank group |
| rank_ref.banks[i].actAllowedAt = std::max(act_at + tRRD, |
| rank_ref.banks[i].actAllowedAt); |
| } |
| } |
| |
| // next, we deal with tXAW, if the activation limit is disabled |
| // then we directly schedule an activate power event |
| if (!rank_ref.actTicks.empty()) { |
| // sanity check |
| if (rank_ref.actTicks.back() && |
| (act_at - rank_ref.actTicks.back()) < tXAW) { |
| panic("Got %d activates in window %d (%llu - %llu) which " |
| "is smaller than %llu\n", activationLimit, act_at - |
| rank_ref.actTicks.back(), act_at, |
| rank_ref.actTicks.back(), tXAW); |
| } |
| |
| // shift the times used for the book keeping, the last element |
| // (highest index) is the oldest one and hence the lowest value |
| rank_ref.actTicks.pop_back(); |
| |
| // record an new activation (in the future) |
| rank_ref.actTicks.push_front(act_at); |
| |
| // cannot activate more than X times in time window tXAW, push the |
| // next one (the X + 1'st activate) to be tXAW away from the |
| // oldest in our window of X |
| if (rank_ref.actTicks.back() && |
| (act_at - rank_ref.actTicks.back()) < tXAW) { |
| DPRINTF(DRAM, "Enforcing tXAW with X = %d, next activate " |
| "no earlier than %llu\n", activationLimit, |
| rank_ref.actTicks.back() + tXAW); |
| for (int j = 0; j < banksPerRank; j++) |
| // next activate must not happen before end of window |
| rank_ref.banks[j].actAllowedAt = |
| std::max(rank_ref.actTicks.back() + tXAW, |
| rank_ref.banks[j].actAllowedAt); |
| } |
| } |
| |
| // at the point when this activate takes place, make sure we |
| // transition to the active power state |
| if (!rank_ref.activateEvent.scheduled()) |
| schedule(rank_ref.activateEvent, act_at); |
| else if (rank_ref.activateEvent.when() > act_at) |
| // move it sooner in time |
| reschedule(rank_ref.activateEvent, act_at); |
| } |
| |
| void |
| DRAMInterface::prechargeBank(Rank& rank_ref, Bank& bank, Tick pre_tick, |
| bool auto_or_preall, bool trace) |
| { |
| // make sure the bank has an open row |
| assert(bank.openRow != Bank::NO_ROW); |
| |
| // sample the bytes per activate here since we are closing |
| // the page |
| stats.bytesPerActivate.sample(bank.bytesAccessed); |
| |
| bank.openRow = Bank::NO_ROW; |
| |
| Tick pre_at = pre_tick; |
| if (auto_or_preall) { |
| // no precharge allowed before this one |
| bank.preAllowedAt = pre_at; |
| } else { |
| // Issuing an explicit PRE command |
| // Verify that we have command bandwidth to issue the precharge |
| // if not, shift to next burst window |
| pre_at = ctrl->verifySingleCmd(pre_tick, maxCommandsPerWindow, true); |
| // enforce tPPD |
| for (int i = 0; i < banksPerRank; i++) { |
| rank_ref.banks[i].preAllowedAt = std::max(pre_at + tPPD, |
| rank_ref.banks[i].preAllowedAt); |
| } |
| } |
| |
| Tick pre_done_at = pre_at + tRP; |
| |
| bank.actAllowedAt = std::max(bank.actAllowedAt, pre_done_at); |
| |
| assert(rank_ref.numBanksActive != 0); |
| --rank_ref.numBanksActive; |
| |
| DPRINTF(DRAM, "Precharging bank %d, rank %d at tick %lld, now got " |
| "%d active\n", bank.bank, rank_ref.rank, pre_at, |
| rank_ref.numBanksActive); |
| |
| if (trace) { |
| |
| rank_ref.cmdList.push_back(Command(MemCommand::PRE, bank.bank, |
| pre_at)); |
| DPRINTF(DRAMPower, "%llu,PRE,%d,%d\n", divCeil(pre_at, tCK) - |
| timeStampOffset, bank.bank, rank_ref.rank); |
| } |
| |
| // if we look at the current number of active banks we might be |
| // tempted to think the DRAM is now idle, however this can be |
| // undone by an activate that is scheduled to happen before we |
| // would have reached the idle state, so schedule an event and |
| // rather check once we actually make it to the point in time when |
| // the (last) precharge takes place |
| if (!rank_ref.prechargeEvent.scheduled()) { |
| schedule(rank_ref.prechargeEvent, pre_done_at); |
| // New event, increment count |
| ++rank_ref.outstandingEvents; |
| } else if (rank_ref.prechargeEvent.when() < pre_done_at) { |
| reschedule(rank_ref.prechargeEvent, pre_done_at); |
| } |
| } |
| |
| std::pair<Tick, Tick> |
| DRAMInterface::doBurstAccess(MemPacket* mem_pkt, Tick next_burst_at, |
| const std::vector<MemPacketQueue>& queue) |
| { |
| DPRINTF(DRAM, "Timing access to addr %#x, rank/bank/row %d %d %d\n", |
| mem_pkt->addr, mem_pkt->rank, mem_pkt->bank, mem_pkt->row); |
| |
| // get the rank |
| Rank& rank_ref = *ranks[mem_pkt->rank]; |
| |
| assert(rank_ref.inRefIdleState()); |
| |
| // are we in or transitioning to a low-power state and have not scheduled |
| // a power-up event? |
| // if so, wake up from power down to issue RD/WR burst |
| if (rank_ref.inLowPowerState) { |
| assert(rank_ref.pwrState != PWR_SREF); |
| rank_ref.scheduleWakeUpEvent(tXP); |
| } |
| |
| // get the bank |
| Bank& bank_ref = rank_ref.banks[mem_pkt->bank]; |
| |
| // for the state we need to track if it is a row hit or not |
| bool row_hit = true; |
| |
| // Determine the access latency and update the bank state |
| if (bank_ref.openRow == mem_pkt->row) { |
| // nothing to do |
| } else { |
| row_hit = false; |
| |
| // If there is a page open, precharge it. |
| if (bank_ref.openRow != Bank::NO_ROW) { |
| prechargeBank(rank_ref, bank_ref, std::max(bank_ref.preAllowedAt, |
| curTick())); |
| } |
| |
| // next we need to account for the delay in activating the page |
| Tick act_tick = std::max(bank_ref.actAllowedAt, curTick()); |
| |
| // Record the activation and deal with all the global timing |
| // constraints caused be a new activation (tRRD and tXAW) |
| activateBank(rank_ref, bank_ref, act_tick, mem_pkt->row); |
| } |
| |
| // respect any constraints on the command (e.g. tRCD or tCCD) |
| const Tick col_allowed_at = mem_pkt->isRead() ? |
| bank_ref.rdAllowedAt : bank_ref.wrAllowedAt; |
| |
| // we need to wait until the bus is available before we can issue |
| // the command; need to ensure minimum bus delay requirement is met |
| Tick cmd_at = std::max({col_allowed_at, next_burst_at, curTick()}); |
| |
| // verify that we have command bandwidth to issue the burst |
| // if not, shift to next burst window |
| Tick max_sync = clkResyncDelay + (mem_pkt->isRead() ? tRL : tWL); |
| if (dataClockSync && ((cmd_at - rank_ref.lastBurstTick) > max_sync)) |
| cmd_at = ctrl->verifyMultiCmd(cmd_at, maxCommandsPerWindow, tCK); |
| else |
| cmd_at = ctrl->verifySingleCmd(cmd_at, maxCommandsPerWindow, false); |
| |
| // if we are interleaving bursts, ensure that |
| // 1) we don't double interleave on next burst issue |
| // 2) we are at an interleave boundary; if not, shift to next boundary |
| Tick burst_gap = tBURST_MIN; |
| if (burstInterleave) { |
| if (cmd_at == (rank_ref.lastBurstTick + tBURST_MIN)) { |
| // already interleaving, push next command to end of full burst |
| burst_gap = tBURST; |
| } else if (cmd_at < (rank_ref.lastBurstTick + tBURST)) { |
| // not at an interleave boundary after bandwidth check |
| // Shift command to tBURST boundary to avoid data contention |
| // Command will remain in the same burst window given that |
| // tBURST is less than tBURST_MAX |
| cmd_at = rank_ref.lastBurstTick + tBURST; |
| } |
| } |
| DPRINTF(DRAM, "Schedule RD/WR burst at tick %d\n", cmd_at); |
| |
| // update the packet ready time |
| if (mem_pkt->isRead()) { |
| mem_pkt->readyTime = cmd_at + tRL + tBURST; |
| } else { |
| mem_pkt->readyTime = cmd_at + tWL + tBURST; |
| } |
| |
| rank_ref.lastBurstTick = cmd_at; |
| |
| // update the time for the next read/write burst for each |
| // bank (add a max with tCCD/tCCD_L/tCCD_L_WR here) |
| Tick dly_to_rd_cmd; |
| Tick dly_to_wr_cmd; |
| for (int j = 0; j < ranksPerChannel; j++) { |
| for (int i = 0; i < banksPerRank; i++) { |
| if (mem_pkt->rank == j) { |
| if (bankGroupArch && |
| (bank_ref.bankgr == ranks[j]->banks[i].bankgr)) { |
| // bank group architecture requires longer delays between |
| // RD/WR burst commands to the same bank group. |
| // tCCD_L is default requirement for same BG timing |
| // tCCD_L_WR is required for write-to-write |
| // Need to also take bus turnaround delays into account |
| dly_to_rd_cmd = mem_pkt->isRead() ? |
| tCCD_L : std::max(tCCD_L, wrToRdDlySameBG); |
| dly_to_wr_cmd = mem_pkt->isRead() ? |
| std::max(tCCD_L, rdToWrDlySameBG) : |
| tCCD_L_WR; |
| } else { |
| // tBURST is default requirement for diff BG timing |
| // Need to also take bus turnaround delays into account |
| dly_to_rd_cmd = mem_pkt->isRead() ? burst_gap : |
| writeToReadDelay(); |
| dly_to_wr_cmd = mem_pkt->isRead() ? readToWriteDelay() : |
| burst_gap; |
| } |
| } else { |
| // different rank is by default in a different bank group and |
| // doesn't require longer tCCD or additional RTW, WTR delays |
| // Need to account for rank-to-rank switching |
| dly_to_wr_cmd = rankToRankDelay(); |
| dly_to_rd_cmd = rankToRankDelay(); |
| } |
| ranks[j]->banks[i].rdAllowedAt = std::max(cmd_at + dly_to_rd_cmd, |
| ranks[j]->banks[i].rdAllowedAt); |
| ranks[j]->banks[i].wrAllowedAt = std::max(cmd_at + dly_to_wr_cmd, |
| ranks[j]->banks[i].wrAllowedAt); |
| } |
| } |
| |
| // Save rank of current access |
| activeRank = mem_pkt->rank; |
| |
| // If this is a write, we also need to respect the write recovery |
| // time before a precharge, in the case of a read, respect the |
| // read to precharge constraint |
| bank_ref.preAllowedAt = std::max(bank_ref.preAllowedAt, |
| mem_pkt->isRead() ? cmd_at + tRTP : |
| mem_pkt->readyTime + tWR); |
| |
| // increment the bytes accessed and the accesses per row |
| bank_ref.bytesAccessed += burstSize; |
| ++bank_ref.rowAccesses; |
| |
| // if we reached the max, then issue with an auto-precharge |
| bool auto_precharge = pageMgmt == enums::close || |
| bank_ref.rowAccesses == maxAccessesPerRow; |
| |
| // if we did not hit the limit, we might still want to |
| // auto-precharge |
| if (!auto_precharge && |
| (pageMgmt == enums::open_adaptive || |
| pageMgmt == enums::close_adaptive)) { |
| // a twist on the open and close page policies: |
| // 1) open_adaptive page policy does not blindly keep the |
| // page open, but close it if there are no row hits, and there |
| // are bank conflicts in the queue |
| // 2) close_adaptive page policy does not blindly close the |
| // page, but closes it only if there are no row hits in the queue. |
| // In this case, only force an auto precharge when there |
| // are no same page hits in the queue |
| bool got_more_hits = false; |
| bool got_bank_conflict = false; |
| |
| for (uint8_t i = 0; i < ctrl->numPriorities(); ++i) { |
| auto p = queue[i].begin(); |
| // keep on looking until we find a hit or reach the end of the |
| // queue |
| // 1) if a hit is found, then both open and close adaptive |
| // policies keep the page open |
| // 2) if no hit is found, got_bank_conflict is set to true if a |
| // bank conflict request is waiting in the queue |
| // 3) make sure we are not considering the packet that we are |
| // currently dealing with |
| while (!got_more_hits && p != queue[i].end()) { |
| |
| if ((*p)->pseudoChannel != pseudoChannel) { |
| // only consider if this pkt belongs to this interface |
| ++p; |
| continue; |
| } |
| |
| if (mem_pkt != (*p)) { |
| bool same_rank_bank = (mem_pkt->rank == (*p)->rank) && |
| (mem_pkt->bank == (*p)->bank); |
| |
| bool same_row = mem_pkt->row == (*p)->row; |
| got_more_hits |= same_rank_bank && same_row; |
| got_bank_conflict |= same_rank_bank && !same_row; |
| } |
| ++p; |
| } |
| |
| if (got_more_hits) |
| break; |
| } |
| |
| // auto pre-charge when either |
| // 1) open_adaptive policy, we have not got any more hits, and |
| // have a bank conflict |
| // 2) close_adaptive policy and we have not got any more hits |
| auto_precharge = !got_more_hits && |
| (got_bank_conflict || pageMgmt == enums::close_adaptive); |
| } |
| |
| // DRAMPower trace command to be written |
| std::string mem_cmd = mem_pkt->isRead() ? "RD" : "WR"; |
| |
| // MemCommand required for DRAMPower library |
| MemCommand::cmds command = (mem_cmd == "RD") ? MemCommand::RD : |
| MemCommand::WR; |
| |
| rank_ref.cmdList.push_back(Command(command, mem_pkt->bank, cmd_at)); |
| |
| DPRINTF(DRAMPower, "%llu,%s,%d,%d\n", divCeil(cmd_at, tCK) - |
| timeStampOffset, mem_cmd, mem_pkt->bank, mem_pkt->rank); |
| |
| // if this access should use auto-precharge, then we are |
| // closing the row after the read/write burst |
| if (auto_precharge) { |
| // if auto-precharge push a PRE command at the correct tick to the |
| // list used by DRAMPower library to calculate power |
| prechargeBank(rank_ref, bank_ref, std::max(curTick(), |
| bank_ref.preAllowedAt), true); |
| |
| DPRINTF(DRAM, "Auto-precharged bank: %d\n", mem_pkt->bankId); |
| } |
| |
| // Update the stats and schedule the next request |
| if (mem_pkt->isRead()) { |
| // Every respQueue which will generate an event, increment count |
| ++rank_ref.outstandingEvents; |
| |
| stats.readBursts++; |
| if (row_hit) |
| stats.readRowHits++; |
| stats.bytesRead += burstSize; |
| stats.perBankRdBursts[mem_pkt->bankId]++; |
| |
| // Update latency stats |
| stats.totMemAccLat += mem_pkt->readyTime - mem_pkt->entryTime; |
| stats.totQLat += cmd_at - mem_pkt->entryTime; |
| stats.totBusLat += tBURST; |
| } else { |
| // Schedule write done event to decrement event count |
| // after the readyTime has been reached |
| // Only schedule latest write event to minimize events |
| // required; only need to ensure that final event scheduled covers |
| // the time that writes are outstanding and bus is active |
| // to holdoff power-down entry events |
| if (!rank_ref.writeDoneEvent.scheduled()) { |
| schedule(rank_ref.writeDoneEvent, mem_pkt->readyTime); |
| // New event, increment count |
| ++rank_ref.outstandingEvents; |
| |
| } else if (rank_ref.writeDoneEvent.when() < mem_pkt->readyTime) { |
| reschedule(rank_ref.writeDoneEvent, mem_pkt->readyTime); |
| } |
| // will remove write from queue when returned to parent function |
| // decrement count for DRAM rank |
| --rank_ref.writeEntries; |
| |
| stats.writeBursts++; |
| if (row_hit) |
| stats.writeRowHits++; |
| stats.bytesWritten += burstSize; |
| stats.perBankWrBursts[mem_pkt->bankId]++; |
| |
| } |
| // Update bus state to reflect when previous command was issued |
| return std::make_pair(cmd_at, cmd_at + burst_gap); |
| } |
| |
| void |
| DRAMInterface::addRankToRankDelay(Tick cmd_at) |
| { |
| // update timing for DRAM ranks due to bursts issued |
| // to ranks on other media interfaces |
| for (auto n : ranks) { |
| for (int i = 0; i < banksPerRank; i++) { |
| // different rank by default |
| // Need to only account for rank-to-rank switching |
| n->banks[i].rdAllowedAt = std::max(cmd_at + rankToRankDelay(), |
| n->banks[i].rdAllowedAt); |
| n->banks[i].wrAllowedAt = std::max(cmd_at + rankToRankDelay(), |
| n->banks[i].wrAllowedAt); |
| } |
| } |
| } |
| |
| DRAMInterface::DRAMInterface(const DRAMInterfaceParams &_p) |
| : MemInterface(_p), |
| bankGroupsPerRank(_p.bank_groups_per_rank), |
| bankGroupArch(_p.bank_groups_per_rank > 0), |
| tRL(_p.tCL), |
| tWL(_p.tCWL), |
| tBURST_MIN(_p.tBURST_MIN), tBURST_MAX(_p.tBURST_MAX), |
| tCCD_L_WR(_p.tCCD_L_WR), tCCD_L(_p.tCCD_L), |
| tRCD_RD(_p.tRCD), tRCD_WR(_p.tRCD_WR), |
| tRP(_p.tRP), tRAS(_p.tRAS), tWR(_p.tWR), tRTP(_p.tRTP), |
| tRFC(_p.tRFC), tREFI(_p.tREFI), tRRD(_p.tRRD), tRRD_L(_p.tRRD_L), |
| tPPD(_p.tPPD), tAAD(_p.tAAD), |
| tXAW(_p.tXAW), tXP(_p.tXP), tXS(_p.tXS), |
| clkResyncDelay(_p.tBURST_MAX), |
| dataClockSync(_p.data_clock_sync), |
| burstInterleave(tBURST != tBURST_MIN), |
| twoCycleActivate(_p.two_cycle_activate), |
| activationLimit(_p.activation_limit), |
| wrToRdDlySameBG(tWL + _p.tBURST_MAX + _p.tWTR_L), |
| rdToWrDlySameBG(_p.tRTW + _p.tBURST_MAX), |
| pageMgmt(_p.page_policy), |
| maxAccessesPerRow(_p.max_accesses_per_row), |
| timeStampOffset(0), activeRank(0), |
| enableDRAMPowerdown(_p.enable_dram_powerdown), |
| lastStatsResetTick(0), |
| stats(*this) |
| { |
| DPRINTF(DRAM, "Setting up DRAM Interface\n"); |
| |
| fatal_if(!isPowerOf2(burstSize), "DRAM burst size %d is not allowed, " |
| "must be a power of two\n", burstSize); |
| |
| // sanity check the ranks since we rely on bit slicing for the |
| // address decoding |
| fatal_if(!isPowerOf2(ranksPerChannel), "DRAM rank count of %d is " |
| "not allowed, must be a power of two\n", ranksPerChannel); |
| |
| for (int i = 0; i < ranksPerChannel; i++) { |
| DPRINTF(DRAM, "Creating DRAM rank %d \n", i); |
| Rank* rank = new Rank(_p, i, *this); |
| ranks.push_back(rank); |
| } |
| |
| // determine the dram actual capacity from the DRAM config in Mbytes |
| uint64_t deviceCapacity = deviceSize / (1024 * 1024) * devicesPerRank * |
| ranksPerChannel; |
| |
| uint64_t capacity = 1ULL << ceilLog2(AbstractMemory::size()); |
| |
| DPRINTF(DRAM, "Memory capacity %lld (%lld) bytes\n", capacity, |
| AbstractMemory::size()); |
| |
| // if actual DRAM size does not match memory capacity in system warn! |
| if (deviceCapacity != capacity / (1024 * 1024)) |
| warn("DRAM device capacity (%d Mbytes) does not match the " |
| "address range assigned (%d Mbytes)\n", deviceCapacity, |
| capacity / (1024 * 1024)); |
| |
| DPRINTF(DRAM, "Row buffer size %d bytes with %d bursts per row buffer\n", |
| rowBufferSize, burstsPerRowBuffer); |
| |
| rowsPerBank = capacity / (rowBufferSize * banksPerRank * ranksPerChannel); |
| |
| // some basic sanity checks |
| if (tREFI <= tRP || tREFI <= tRFC) { |
| fatal("tREFI (%d) must be larger than tRP (%d) and tRFC (%d)\n", |
| tREFI, tRP, tRFC); |
| } |
| |
| // basic bank group architecture checks -> |
| if (bankGroupArch) { |
| // must have at least one bank per bank group |
| if (bankGroupsPerRank > banksPerRank) { |
| fatal("banks per rank (%d) must be equal to or larger than " |
| "banks groups per rank (%d)\n", |
| banksPerRank, bankGroupsPerRank); |
| } |
| // must have same number of banks in each bank group |
| if ((banksPerRank % bankGroupsPerRank) != 0) { |
| fatal("Banks per rank (%d) must be evenly divisible by bank " |
| "groups per rank (%d) for equal banks per bank group\n", |
| banksPerRank, bankGroupsPerRank); |
| } |
| // tCCD_L should be greater than minimal, back-to-back burst delay |
| if (tCCD_L <= tBURST) { |
| fatal("tCCD_L (%d) should be larger than the minimum bus delay " |
| "(%d) when bank groups per rank (%d) is greater than 1\n", |
| tCCD_L, tBURST, bankGroupsPerRank); |
| } |
| // tCCD_L_WR should be greater than minimal, back-to-back burst delay |
| if (tCCD_L_WR <= tBURST) { |
| fatal("tCCD_L_WR (%d) should be larger than the minimum bus delay " |
| " (%d) when bank groups per rank (%d) is greater than 1\n", |
| tCCD_L_WR, tBURST, bankGroupsPerRank); |
| } |
| // tRRD_L is greater than minimal, same bank group ACT-to-ACT delay |
| // some datasheets might specify it equal to tRRD |
| if (tRRD_L < tRRD) { |
| fatal("tRRD_L (%d) should be larger than tRRD (%d) when " |
| "bank groups per rank (%d) is greater than 1\n", |
| tRRD_L, tRRD, bankGroupsPerRank); |
| } |
| } |
| } |
| |
| void |
| DRAMInterface::init() |
| { |
| AbstractMemory::init(); |
| |
| // a bit of sanity checks on the interleaving, save it for here to |
| // ensure that the system pointer is initialised |
| if (range.interleaved()) { |
| if (addrMapping == enums::RoRaBaChCo) { |
| if (rowBufferSize != range.granularity()) { |
| fatal("Channel interleaving of %s doesn't match RoRaBaChCo " |
| "address map\n", name()); |
| } |
| } else if (addrMapping == enums::RoRaBaCoCh || |
| addrMapping == enums::RoCoRaBaCh) { |
| // for the interleavings with channel bits in the bottom, |
| // if the system uses a channel striping granularity that |
| // is larger than the DRAM burst size, then map the |
| // sequential accesses within a stripe to a number of |
| // columns in the DRAM, effectively placing some of the |
| // lower-order column bits as the least-significant bits |
| // of the address (above the ones denoting the burst size) |
| assert(burstsPerStripe >= 1); |
| |
| // channel striping has to be done at a granularity that |
| // is equal or larger to a cache line |
| if (system()->cacheLineSize() > range.granularity()) { |
| fatal("Channel interleaving of %s must be at least as large " |
| "as the cache line size\n", name()); |
| } |
| |
| // ...and equal or smaller than the row-buffer size |
| if (rowBufferSize < range.granularity()) { |
| fatal("Channel interleaving of %s must be at most as large " |
| "as the row-buffer size\n", name()); |
| } |
| // this is essentially the check above, so just to be sure |
| assert(burstsPerStripe <= burstsPerRowBuffer); |
| } |
| } |
| } |
| |
| void |
| DRAMInterface::startup() |
| { |
| if (system()->isTimingMode()) { |
| // timestamp offset should be in clock cycles for DRAMPower |
| timeStampOffset = divCeil(curTick(), tCK); |
| |
| for (auto r : ranks) { |
| r->startup(curTick() + tREFI - tRP); |
| } |
| } |
| } |
| |
| bool |
| DRAMInterface::isBusy(bool read_queue_empty, bool all_writes_nvm) |
| { |
| int busy_ranks = 0; |
| for (auto r : ranks) { |
| if (!r->inRefIdleState()) { |
| if (r->pwrState != PWR_SREF) { |
| // rank is busy refreshing |
| DPRINTF(DRAMState, "Rank %d is not available\n", r->rank); |
| busy_ranks++; |
| |
| // let the rank know that if it was waiting to drain, it |
| // is now done and ready to proceed |
| r->checkDrainDone(); |
| } |
| |
| // check if we were in self-refresh and haven't started |
| // to transition out |
| if ((r->pwrState == PWR_SREF) && r->inLowPowerState) { |
| DPRINTF(DRAMState, "Rank %d is in self-refresh\n", r->rank); |
| // if we have commands queued to this rank and we don't have |
| // a minimum number of active commands enqueued, |
| // exit self-refresh |
| if (r->forceSelfRefreshExit()) { |
| DPRINTF(DRAMState, "rank %d was in self refresh and" |
| " should wake up\n", r->rank); |
| //wake up from self-refresh |
| r->scheduleWakeUpEvent(tXS); |
| // things are brought back into action once a refresh is |
| // performed after self-refresh |
| // continue with selection for other ranks |
| } |
| } |
| } |
| } |
| return (busy_ranks == ranksPerChannel); |
| } |
| |
| MemPacket* |
| DRAMInterface::decodePacket(const PacketPtr pkt, Addr pkt_addr, |
| unsigned size, bool is_read, uint8_t pseudo_channel) |
| { |
| // decode the address based on the address mapping scheme, with |
| // Ro, Ra, Co, Ba and Ch denoting row, rank, column, bank and |
| // channel, respectively |
| uint8_t rank; |
| uint8_t bank; |
| // use a 64-bit unsigned during the computations as the row is |
| // always the top bits, and check before creating the packet |
| uint64_t row; |
| |
| // Get packed address, starting at 0 |
| Addr addr = getCtrlAddr(pkt_addr); |
| |
| // truncate the address to a memory burst, which makes it unique to |
| // a specific buffer, row, bank, rank and channel |
| addr = addr / burstSize; |
| |
| // we have removed the lowest order address bits that denote the |
| // position within the column |
| if (addrMapping == enums::RoRaBaChCo || addrMapping == enums::RoRaBaCoCh) { |
| // the lowest order bits denote the column to ensure that |
| // sequential cache lines occupy the same row |
| addr = addr / burstsPerRowBuffer; |
| |
| // after the channel bits, get the bank bits to interleave |
| // over the banks |
| bank = addr % banksPerRank; |
| addr = addr / banksPerRank; |
| |
| // after the bank, we get the rank bits which thus interleaves |
| // over the ranks |
| rank = addr % ranksPerChannel; |
| addr = addr / ranksPerChannel; |
| |
| // lastly, get the row bits, no need to remove them from addr |
| row = addr % rowsPerBank; |
| } else if (addrMapping == enums::RoCoRaBaCh) { |
| // with emerging technologies, could have small page size with |
| // interleaving granularity greater than row buffer |
| if (burstsPerStripe > burstsPerRowBuffer) { |
| // remove column bits which are a subset of burstsPerStripe |
| addr = addr / burstsPerRowBuffer; |
| } else { |
| // remove lower column bits below channel bits |
| addr = addr / burstsPerStripe; |
| } |
| |
| // start with the bank bits, as this provides the maximum |
| // opportunity for parallelism between requests |
| bank = addr % banksPerRank; |
| addr = addr / banksPerRank; |
| |
| // next get the rank bits |
| rank = addr % ranksPerChannel; |
| addr = addr / ranksPerChannel; |
| |
| // next, the higher-order column bites |
| if (burstsPerStripe < burstsPerRowBuffer) { |
| addr = addr / (burstsPerRowBuffer / burstsPerStripe); |
| } |
| |
| // lastly, get the row bits, no need to remove them from addr |
| row = addr % rowsPerBank; |
| } else |
| panic("Unknown address mapping policy chosen!"); |
| |
| assert(rank < ranksPerChannel); |
| assert(bank < banksPerRank); |
| assert(row < rowsPerBank); |
| assert(row < Bank::NO_ROW); |
| |
| DPRINTF(DRAM, "Address: %#x Rank %d Bank %d Row %d\n", |
| pkt_addr, rank, bank, row); |
| |
| // create the corresponding memory packet with the entry time and |
| // ready time set to the current tick, the latter will be updated |
| // later |
| uint16_t bank_id = banksPerRank * rank + bank; |
| |
| return new MemPacket(pkt, is_read, true, pseudo_channel, rank, bank, row, |
| bank_id, pkt_addr, size); |
| } |
| |
| void DRAMInterface::setupRank(const uint8_t rank, const bool is_read) |
| { |
| // increment entry count of the rank based on packet type |
| if (is_read) { |
| ++ranks[rank]->readEntries; |
| } else { |
| ++ranks[rank]->writeEntries; |
| } |
| } |
| |
| void |
| DRAMInterface::respondEvent(uint8_t rank) |
| { |
| Rank& rank_ref = *ranks[rank]; |
| |
| // if a read has reached its ready-time, decrement the number of reads |
| // At this point the packet has been handled and there is a possibility |
| // to switch to low-power mode if no other packet is available |
| --rank_ref.readEntries; |
| DPRINTF(DRAM, "number of read entries for rank %d is %d\n", |
| rank, rank_ref.readEntries); |
| |
| // counter should at least indicate one outstanding request |
| // for this read |
| assert(rank_ref.outstandingEvents > 0); |
| // read response received, decrement count |
| --rank_ref.outstandingEvents; |
| |
| // at this moment should not have transitioned to a low-power state |
| assert((rank_ref.pwrState != PWR_SREF) && |
| (rank_ref.pwrState != PWR_PRE_PDN) && |
| (rank_ref.pwrState != PWR_ACT_PDN)); |
| |
| // track if this is the last packet before idling |
| // and that there are no outstanding commands to this rank |
| if (rank_ref.isQueueEmpty() && rank_ref.outstandingEvents == 0 && |
| rank_ref.inRefIdleState() && enableDRAMPowerdown) { |
| // verify that there are no events scheduled |
| assert(!rank_ref.activateEvent.scheduled()); |
| assert(!rank_ref.prechargeEvent.scheduled()); |
| |
| // if coming from active state, schedule power event to |
| // active power-down else go to precharge power-down |
| DPRINTF(DRAMState, "Rank %d sleep at tick %d; current power state is " |
| "%d\n", rank, curTick(), rank_ref.pwrState); |
| |
| // default to ACT power-down unless already in IDLE state |
| // could be in IDLE if PRE issued before data returned |
| PowerState next_pwr_state = PWR_ACT_PDN; |
| if (rank_ref.pwrState == PWR_IDLE) { |
| next_pwr_state = PWR_PRE_PDN; |
| } |
| |
| rank_ref.powerDownSleep(next_pwr_state, curTick()); |
| } |
| } |
| |
| void |
| DRAMInterface::checkRefreshState(uint8_t rank) |
| { |
| Rank& rank_ref = *ranks[rank]; |
| |
| if ((rank_ref.refreshState == REF_PRE) && |
| !rank_ref.prechargeEvent.scheduled()) { |
| // kick the refresh event loop into action again if banks already |
| // closed and just waiting for read to complete |
| schedule(rank_ref.refreshEvent, curTick()); |
| } |
| } |
| |
| void |
| DRAMInterface::drainRanks() |
| { |
| // also need to kick off events to exit self-refresh |
| for (auto r : ranks) { |
| // force self-refresh exit, which in turn will issue auto-refresh |
| if (r->pwrState == PWR_SREF) { |
| DPRINTF(DRAM,"Rank%d: Forcing self-refresh wakeup in drain\n", |
| r->rank); |
| r->scheduleWakeUpEvent(tXS); |
| } |
| } |
| } |
| |
| bool |
| DRAMInterface::allRanksDrained() const |
| { |
| // true until proven false |
| bool all_ranks_drained = true; |
| for (auto r : ranks) { |
| // then verify that the power state is IDLE ensuring all banks are |
| // closed and rank is not in a low power state. Also verify that rank |
| // is idle from a refresh point of view. |
| all_ranks_drained = r->inPwrIdleState() && r->inRefIdleState() && |
| all_ranks_drained; |
| } |
| return all_ranks_drained; |
| } |
| |
| void |
| DRAMInterface::suspend() |
| { |
| for (auto r : ranks) { |
| r->suspend(); |
| } |
| } |
| |
| std::pair<std::vector<uint32_t>, bool> |
| DRAMInterface::minBankPrep(const MemPacketQueue& queue, |
| Tick min_col_at) const |
| { |
| Tick min_act_at = MaxTick; |
| std::vector<uint32_t> bank_mask(ranksPerChannel, 0); |
| |
| // Flag condition when burst can issue back-to-back with previous burst |
| bool found_seamless_bank = false; |
| |
| // Flag condition when bank can be opened without incurring additional |
| // delay on the data bus |
| bool hidden_bank_prep = false; |
| |
| // determine if we have queued transactions targetting the |
| // bank in question |
| std::vector<bool> got_waiting(ranksPerChannel * banksPerRank, false); |
| for (const auto& p : queue) { |
| if (p->pseudoChannel != pseudoChannel) |
| continue; |
| if (p->isDram() && ranks[p->rank]->inRefIdleState()) |
| got_waiting[p->bankId] = true; |
| } |
| |
| // Find command with optimal bank timing |
| // Will prioritize commands that can issue seamlessly. |
| for (int i = 0; i < ranksPerChannel; i++) { |
| for (int j = 0; j < banksPerRank; j++) { |
| uint16_t bank_id = i * banksPerRank + j; |
| |
| // if we have waiting requests for the bank, and it is |
| // amongst the first available, update the mask |
| if (got_waiting[bank_id]) { |
| // make sure this rank is not currently refreshing. |
| assert(ranks[i]->inRefIdleState()); |
| // simplistic approximation of when the bank can issue |
| // an activate, ignoring any rank-to-rank switching |
| // cost in this calculation |
| Tick act_at = ranks[i]->banks[j].openRow == Bank::NO_ROW ? |
| std::max(ranks[i]->banks[j].actAllowedAt, curTick()) : |
| std::max(ranks[i]->banks[j].preAllowedAt, curTick()) + tRP; |
| |
| // latest Tick for which ACT can occur without |
| // incurring additoinal delay on the data bus |
| const Tick tRCD = ctrl->inReadBusState(false, this) ? |
| tRCD_RD : tRCD_WR; |
| const Tick hidden_act_max = |
| std::max(min_col_at - tRCD, curTick()); |
| |
| // When is the earliest the R/W burst can issue? |
| const Tick col_allowed_at = ctrl->inReadBusState(false, |
| this) ? |
| ranks[i]->banks[j].rdAllowedAt : |
| ranks[i]->banks[j].wrAllowedAt; |
| Tick col_at = std::max(col_allowed_at, act_at + tRCD); |
| |
| // bank can issue burst back-to-back (seamlessly) with |
| // previous burst |
| bool new_seamless_bank = col_at <= min_col_at; |
| |
| // if we found a new seamless bank or we have no |
| // seamless banks, and got a bank with an earlier |
| // activate time, it should be added to the bit mask |
| if (new_seamless_bank || |
| (!found_seamless_bank && act_at <= min_act_at)) { |
| // if we did not have a seamless bank before, and |
| // we do now, reset the bank mask, also reset it |
| // if we have not yet found a seamless bank and |
| // the activate time is smaller than what we have |
| // seen so far |
| if (!found_seamless_bank && |
| (new_seamless_bank || act_at < min_act_at)) { |
| std::fill(bank_mask.begin(), bank_mask.end(), 0); |
| } |
| |
| found_seamless_bank |= new_seamless_bank; |
| |
| // ACT can occur 'behind the scenes' |
| hidden_bank_prep = act_at <= hidden_act_max; |
| |
| // set the bit corresponding to the available bank |
| replaceBits(bank_mask[i], j, j, 1); |
| min_act_at = act_at; |
| } |
| } |
| } |
| } |
| |
| return std::make_pair(bank_mask, hidden_bank_prep); |
| } |
| |
| DRAMInterface::Rank::Rank(const DRAMInterfaceParams &_p, |
| int _rank, DRAMInterface& _dram) |
| : EventManager(&_dram), dram(_dram), |
| pwrStateTrans(PWR_IDLE), pwrStatePostRefresh(PWR_IDLE), |
| pwrStateTick(0), refreshDueAt(0), pwrState(PWR_IDLE), |
| refreshState(REF_IDLE), inLowPowerState(false), rank(_rank), |
| readEntries(0), writeEntries(0), outstandingEvents(0), |
| wakeUpAllowedAt(0), power(_p, false), banks(_p.banks_per_rank), |
| numBanksActive(0), actTicks(_p.activation_limit, 0), lastBurstTick(0), |
| writeDoneEvent([this]{ processWriteDoneEvent(); }, name()), |
| activateEvent([this]{ processActivateEvent(); }, name()), |
| prechargeEvent([this]{ processPrechargeEvent(); }, name()), |
| refreshEvent([this]{ processRefreshEvent(); }, name()), |
| powerEvent([this]{ processPowerEvent(); }, name()), |
| wakeUpEvent([this]{ processWakeUpEvent(); }, name()), |
| stats(_dram, *this) |
| { |
| for (int b = 0; b < _p.banks_per_rank; b++) { |
| banks[b].bank = b; |
| // GDDR addressing of banks to BG is linear. |
| // Here we assume that all DRAM generations address bank groups as |
| // follows: |
| if (_p.bank_groups_per_rank > 0) { |
| // Simply assign lower bits to bank group in order to |
| // rotate across bank groups as banks are incremented |
| // e.g. with 4 banks per bank group and 16 banks total: |
| // banks 0,4,8,12 are in bank group 0 |
| // banks 1,5,9,13 are in bank group 1 |
| // banks 2,6,10,14 are in bank group 2 |
| // banks 3,7,11,15 are in bank group 3 |
| banks[b].bankgr = b % _p.bank_groups_per_rank; |
| } else { |
| // No bank groups; simply assign to bank number |
| banks[b].bankgr = b; |
| } |
| } |
| } |
| |
| void |
| DRAMInterface::Rank::startup(Tick ref_tick) |
| { |
| assert(ref_tick > curTick()); |
| |
| pwrStateTick = curTick(); |
| |
| // kick off the refresh, and give ourselves enough time to |
| // precharge |
| schedule(refreshEvent, ref_tick); |
| } |
| |
| void |
| DRAMInterface::Rank::suspend() |
| { |
| deschedule(refreshEvent); |
| |
| // Update the stats |
| updatePowerStats(); |
| |
| // don't automatically transition back to LP state after next REF |
| pwrStatePostRefresh = PWR_IDLE; |
| } |
| |
| bool |
| DRAMInterface::Rank::isQueueEmpty() const |
| { |
| // check commmands in Q based on current bus direction |
| bool no_queued_cmds = (dram.ctrl->inReadBusState(true, &(this->dram)) |
| && (readEntries == 0)) || |
| (dram.ctrl->inWriteBusState(true, &(this->dram)) |
| && (writeEntries == 0)); |
| return no_queued_cmds; |
| } |
| |
| void |
| DRAMInterface::Rank::checkDrainDone() |
| { |
| // if this rank was waiting to drain it is now able to proceed to |
| // precharge |
| if (refreshState == REF_DRAIN) { |
| DPRINTF(DRAM, "Refresh drain done, now precharging\n"); |
| |
| refreshState = REF_PD_EXIT; |
| |
| // hand control back to the refresh event loop |
| schedule(refreshEvent, curTick()); |
| } |
| } |
| |
| void |
| DRAMInterface::Rank::flushCmdList() |
| { |
| // at the moment sort the list of commands and update the counters |
| // for DRAMPower libray when doing a refresh |
| sort(cmdList.begin(), cmdList.end(), DRAMInterface::sortTime); |
| |
| auto next_iter = cmdList.begin(); |
| // push to commands to DRAMPower |
| for ( ; next_iter != cmdList.end() ; ++next_iter) { |
| Command cmd = *next_iter; |
| if (cmd.timeStamp <= curTick()) { |
| // Move all commands at or before curTick to DRAMPower |
| power.powerlib.doCommand(cmd.type, cmd.bank, |
| divCeil(cmd.timeStamp, dram.tCK) - |
| dram.timeStampOffset); |
| } else { |
| // done - found all commands at or before curTick() |
| // next_iter references the 1st command after curTick |
| break; |
| } |
| } |
| // reset cmdList to only contain commands after curTick |
| // if there are no commands after curTick, updated cmdList will be empty |
| // in this case, next_iter is cmdList.end() |
| cmdList.assign(next_iter, cmdList.end()); |
| } |
| |
| void |
| DRAMInterface::Rank::processActivateEvent() |
| { |
| // we should transition to the active state as soon as any bank is active |
| if (pwrState != PWR_ACT) |
| // note that at this point numBanksActive could be back at |
| // zero again due to a precharge scheduled in the future |
| schedulePowerEvent(PWR_ACT, curTick()); |
| } |
| |
| void |
| DRAMInterface::Rank::processPrechargeEvent() |
| { |
| // counter should at least indicate one outstanding request |
| // for this precharge |
| assert(outstandingEvents > 0); |
| // precharge complete, decrement count |
| --outstandingEvents; |
| |
| // if we reached zero, then special conditions apply as we track |
| // if all banks are precharged for the power models |
| if (numBanksActive == 0) { |
| // no reads to this rank in the Q and no pending |
| // RD/WR or refresh commands |
| if (isQueueEmpty() && outstandingEvents == 0 && |
| dram.enableDRAMPowerdown) { |
| // should still be in ACT state since bank still open |
| assert(pwrState == PWR_ACT); |
| |
| // All banks closed - switch to precharge power down state. |
| DPRINTF(DRAMState, "Rank %d sleep at tick %d\n", |
| rank, curTick()); |
| powerDownSleep(PWR_PRE_PDN, curTick()); |
| } else { |
| // we should transition to the idle state when the last bank |
| // is precharged |
| schedulePowerEvent(PWR_IDLE, curTick()); |
| } |
| } |
| } |
| |
| void |
| DRAMInterface::Rank::processWriteDoneEvent() |
| { |
| // counter should at least indicate one outstanding request |
| // for this write |
| assert(outstandingEvents > 0); |
| // Write transfer on bus has completed |
| // decrement per rank counter |
| --outstandingEvents; |
| } |
| |
| void |
| DRAMInterface::Rank::processRefreshEvent() |
| { |
| // when first preparing the refresh, remember when it was due |
| if ((refreshState == REF_IDLE) || (refreshState == REF_SREF_EXIT)) { |
| // remember when the refresh is due |
| refreshDueAt = curTick(); |
| |
| // proceed to drain |
| refreshState = REF_DRAIN; |
| |
| // make nonzero while refresh is pending to ensure |
| // power down and self-refresh are not entered |
| ++outstandingEvents; |
| |
| DPRINTF(DRAM, "Refresh due\n"); |
| } |
| |
| // let any scheduled read or write to the same rank go ahead, |
| // after which it will |
| // hand control back to this event loop |
| if (refreshState == REF_DRAIN) { |
| // if a request is at the moment being handled and this request is |
| // accessing the current rank then wait for it to finish |
| if ((rank == dram.activeRank) |
| && (dram.ctrl->requestEventScheduled(dram.pseudoChannel))) { |
| // hand control over to the request loop until it is |
| // evaluated next |
| DPRINTF(DRAM, "Refresh awaiting draining\n"); |
| return; |
| } else { |
| refreshState = REF_PD_EXIT; |
| } |
| } |
| |
| // at this point, ensure that rank is not in a power-down state |
| if (refreshState == REF_PD_EXIT) { |
| // if rank was sleeping and we have't started exit process, |
| // wake-up for refresh |
| if (inLowPowerState) { |
| DPRINTF(DRAM, "Wake Up for refresh\n"); |
| // save state and return after refresh completes |
| scheduleWakeUpEvent(dram.tXP); |
| return; |
| } else { |
| refreshState = REF_PRE; |
| } |
| } |
| |
| // at this point, ensure that all banks are precharged |
| if (refreshState == REF_PRE) { |
| // precharge any active bank |
| if (numBanksActive != 0) { |
| // at the moment, we use a precharge all even if there is |
| // only a single bank open |
| DPRINTF(DRAM, "Precharging all\n"); |
| |
| // first determine when we can precharge |
| Tick pre_at = curTick(); |
| |
| for (auto &b : banks) { |
| // respect both causality and any existing bank |
| // constraints, some banks could already have a |
| // (auto) precharge scheduled |
| pre_at = std::max(b.preAllowedAt, pre_at); |
| } |
| |
| // make sure all banks per rank are precharged, and for those that |
| // already are, update their availability |
| Tick act_allowed_at = pre_at + dram.tRP; |
| |
| for (auto &b : banks) { |
| if (b.openRow != Bank::NO_ROW) { |
| dram.prechargeBank(*this, b, pre_at, true, false); |
| } else { |
| b.actAllowedAt = std::max(b.actAllowedAt, act_allowed_at); |
| b.preAllowedAt = std::max(b.preAllowedAt, pre_at); |
| } |
| } |
| |
| // precharge all banks in rank |
| cmdList.push_back(Command(MemCommand::PREA, 0, pre_at)); |
| |
| DPRINTF(DRAMPower, "%llu,PREA,0,%d\n", |
| divCeil(pre_at, dram.tCK) - |
| dram.timeStampOffset, rank); |
| } else if ((pwrState == PWR_IDLE) && (outstandingEvents == 1)) { |
| // Banks are closed, have transitioned to IDLE state, and |
| // no outstanding ACT,RD/WR,Auto-PRE sequence scheduled |
| DPRINTF(DRAM, "All banks already precharged, starting refresh\n"); |
| |
| // go ahead and kick the power state machine into gear since |
| // we are already idle |
| schedulePowerEvent(PWR_REF, curTick()); |
| } else { |
| // banks state is closed but haven't transitioned pwrState to IDLE |
| // or have outstanding ACT,RD/WR,Auto-PRE sequence scheduled |
| // should have outstanding precharge or read response event |
| assert(prechargeEvent.scheduled() || |
| dram.ctrl->respondEventScheduled(dram.pseudoChannel)); |
| // will start refresh when pwrState transitions to IDLE |
| } |
| |
| assert(numBanksActive == 0); |
| |
| // wait for all banks to be precharged or read to complete |
| // When precharge commands are done, power state machine will |
| // transition to the idle state, and automatically move to a |
| // refresh, at that point it will also call this method to get |
| // the refresh event loop going again |
| // Similarly, when read response completes, if all banks are |
| // precharged, will call this method to get loop re-started |
| return; |
| } |
| |
| // last but not least we perform the actual refresh |
| if (refreshState == REF_START) { |
| // should never get here with any banks active |
| assert(numBanksActive == 0); |
| assert(pwrState == PWR_REF); |
| |
| Tick ref_done_at = curTick() + dram.tRFC; |
| |
| for (auto &b : banks) { |
| b.actAllowedAt = ref_done_at; |
| } |
| |
| // at the moment this affects all ranks |
| cmdList.push_back(Command(MemCommand::REF, 0, curTick())); |
| |
| // Update the stats |
| updatePowerStats(); |
| |
| DPRINTF(DRAMPower, "%llu,REF,0,%d\n", divCeil(curTick(), dram.tCK) - |
| dram.timeStampOffset, rank); |
| |
| // Update for next refresh |
| refreshDueAt += dram.tREFI; |
| |
| // make sure we did not wait so long that we cannot make up |
| // for it |
| if (refreshDueAt < ref_done_at) { |
| fatal("Refresh was delayed so long we cannot catch up\n"); |
| } |
| |
| // Run the refresh and schedule event to transition power states |
| // when refresh completes |
| refreshState = REF_RUN; |
| schedule(refreshEvent, ref_done_at); |
| return; |
| } |
| |
| if (refreshState == REF_RUN) { |
| // should never get here with any banks active |
| assert(numBanksActive == 0); |
| assert(pwrState == PWR_REF); |
| |
| assert(!powerEvent.scheduled()); |
| |
| if ((dram.ctrl->drainState() == DrainState::Draining) || |
| (dram.ctrl->drainState() == DrainState::Drained)) { |
| // if draining, do not re-enter low-power mode. |
| // simply go to IDLE and wait |
| schedulePowerEvent(PWR_IDLE, curTick()); |
| } else { |
| // At the moment, we sleep when the refresh ends and wait to be |
| // woken up again if previously in a low-power state. |
| if (pwrStatePostRefresh != PWR_IDLE) { |
| // power State should be power Refresh |
| assert(pwrState == PWR_REF); |
| DPRINTF(DRAMState, "Rank %d sleeping after refresh and was in " |
| "power state %d before refreshing\n", rank, |
| pwrStatePostRefresh); |
| powerDownSleep(pwrState, curTick()); |
| |
| // Force PRE power-down if there are no outstanding commands |
| // in Q after refresh. |
| } else if (isQueueEmpty() && dram.enableDRAMPowerdown) { |
| // still have refresh event outstanding but there should |
| // be no other events outstanding |
| assert(outstandingEvents == 1); |
| DPRINTF(DRAMState, "Rank %d sleeping after refresh but was NOT" |
| " in a low power state before refreshing\n", rank); |
| powerDownSleep(PWR_PRE_PDN, curTick()); |
| |
| } else { |
| // move to the idle power state once the refresh is done, this |
| // will also move the refresh state machine to the refresh |
| // idle state |
| schedulePowerEvent(PWR_IDLE, curTick()); |
| } |
| } |
| |
| // At this point, we have completed the current refresh. |
| // In the SREF bypass case, we do not get to this state in the |
| // refresh STM and therefore can always schedule next event. |
| // Compensate for the delay in actually performing the refresh |
| // when scheduling the next one |
| schedule(refreshEvent, refreshDueAt - dram.tRP); |
| |
| DPRINTF(DRAMState, "Refresh done at %llu and next refresh" |
| " at %llu\n", curTick(), refreshDueAt); |
| } |
| } |
| |
| void |
| DRAMInterface::Rank::schedulePowerEvent(PowerState pwr_state, Tick tick) |
| { |
| // respect causality |
| assert(tick >= curTick()); |
| |
| if (!powerEvent.scheduled()) { |
| DPRINTF(DRAMState, "Scheduling power event at %llu to state %d\n", |
| tick, pwr_state); |
| |
| // insert the new transition |
| pwrStateTrans = pwr_state; |
| |
| schedule(powerEvent, tick); |
| } else { |
| panic("Scheduled power event at %llu to state %d, " |
| "with scheduled event at %llu to %d\n", tick, pwr_state, |
| powerEvent.when(), pwrStateTrans); |
| } |
| } |
| |
| void |
| DRAMInterface::Rank::powerDownSleep(PowerState pwr_state, Tick tick) |
| { |
| // if low power state is active low, schedule to active low power state. |
| // in reality tCKE is needed to enter active low power. This is neglected |
| // here and could be added in the future. |
| if (pwr_state == PWR_ACT_PDN) { |
| schedulePowerEvent(pwr_state, tick); |
| // push command to DRAMPower |
| cmdList.push_back(Command(MemCommand::PDN_F_ACT, 0, tick)); |
| DPRINTF(DRAMPower, "%llu,PDN_F_ACT,0,%d\n", divCeil(tick, |
| dram.tCK) - dram.timeStampOffset, rank); |
| } else if (pwr_state == PWR_PRE_PDN) { |
| // if low power state is precharge low, schedule to precharge low |
| // power state. In reality tCKE is needed to enter active low power. |
| // This is neglected here. |
| schedulePowerEvent(pwr_state, tick); |
| //push Command to DRAMPower |
| cmdList.push_back(Command(MemCommand::PDN_F_PRE, 0, tick)); |
| DPRINTF(DRAMPower, "%llu,PDN_F_PRE,0,%d\n", divCeil(tick, |
| dram.tCK) - dram.timeStampOffset, rank); |
| } else if (pwr_state == PWR_REF) { |
| // if a refresh just occurred |
| // transition to PRE_PDN now that all banks are closed |
| // precharge power down requires tCKE to enter. For simplicity |
| // this is not considered. |
| schedulePowerEvent(PWR_PRE_PDN, tick); |
| //push Command to DRAMPower |
| cmdList.push_back(Command(MemCommand::PDN_F_PRE, 0, tick)); |
| DPRINTF(DRAMPower, "%llu,PDN_F_PRE,0,%d\n", divCeil(tick, |
| dram.tCK) - dram.timeStampOffset, rank); |
| } else if (pwr_state == PWR_SREF) { |
| // should only enter SREF after PRE-PD wakeup to do a refresh |
| assert(pwrStatePostRefresh == PWR_PRE_PDN); |
| // self refresh requires time tCKESR to enter. For simplicity, |
| // this is not considered. |
| schedulePowerEvent(PWR_SREF, tick); |
| // push Command to DRAMPower |
| cmdList.push_back(Command(MemCommand::SREN, 0, tick)); |
| DPRINTF(DRAMPower, "%llu,SREN,0,%d\n", divCeil(tick, |
| dram.tCK) - dram.timeStampOffset, rank); |
| } |
| // Ensure that we don't power-down and back up in same tick |
| // Once we commit to PD entry, do it and wait for at least 1tCK |
| // This could be replaced with tCKE if/when that is added to the model |
| wakeUpAllowedAt = tick + dram.tCK; |
| |
| // Transitioning to a low power state, set flag |
| inLowPowerState = true; |
| } |
| |
| void |
| DRAMInterface::Rank::scheduleWakeUpEvent(Tick exit_delay) |
| { |
| Tick wake_up_tick = std::max(curTick(), wakeUpAllowedAt); |
| |
| DPRINTF(DRAMState, "Scheduling wake-up for rank %d at tick %d\n", |
| rank, wake_up_tick); |
| |
| // if waking for refresh, hold previous state |
| // else reset state back to IDLE |
| if (refreshState == REF_PD_EXIT) { |
| pwrStatePostRefresh = pwrState; |
| } else { |
| // don't automatically transition back to LP state after next REF |
| pwrStatePostRefresh = PWR_IDLE; |
| } |
| |
| // schedule wake-up with event to ensure entry has completed before |
| // we try to wake-up |
| schedule(wakeUpEvent, wake_up_tick); |
| |
| for (auto &b : banks) { |
| // respect both causality and any existing bank |
| // constraints, some banks could already have a |
| // (auto) precharge scheduled |
| b.wrAllowedAt = std::max(wake_up_tick + exit_delay, b.wrAllowedAt); |
| b.rdAllowedAt = std::max(wake_up_tick + exit_delay, b.rdAllowedAt); |
| b.preAllowedAt = std::max(wake_up_tick + exit_delay, b.preAllowedAt); |
| b.actAllowedAt = std::max(wake_up_tick + exit_delay, b.actAllowedAt); |
| } |
| // Transitioning out of low power state, clear flag |
| inLowPowerState = false; |
| |
| // push to DRAMPower |
| // use pwrStateTrans for cases where we have a power event scheduled |
| // to enter low power that has not yet been processed |
| if (pwrStateTrans == PWR_ACT_PDN) { |
| cmdList.push_back(Command(MemCommand::PUP_ACT, 0, wake_up_tick)); |
| DPRINTF(DRAMPower, "%llu,PUP_ACT,0,%d\n", divCeil(wake_up_tick, |
| dram.tCK) - dram.timeStampOffset, rank); |
| |
| } else if (pwrStateTrans == PWR_PRE_PDN) { |
| cmdList.push_back(Command(MemCommand::PUP_PRE, 0, wake_up_tick)); |
| DPRINTF(DRAMPower, "%llu,PUP_PRE,0,%d\n", divCeil(wake_up_tick, |
| dram.tCK) - dram.timeStampOffset, rank); |
| } else if (pwrStateTrans == PWR_SREF) { |
| cmdList.push_back(Command(MemCommand::SREX, 0, wake_up_tick)); |
| DPRINTF(DRAMPower, "%llu,SREX,0,%d\n", divCeil(wake_up_tick, |
| dram.tCK) - dram.timeStampOffset, rank); |
| } |
| } |
| |
| void |
| DRAMInterface::Rank::processWakeUpEvent() |
| { |
| // Should be in a power-down or self-refresh state |
| assert((pwrState == PWR_ACT_PDN) || (pwrState == PWR_PRE_PDN) || |
| (pwrState == PWR_SREF)); |
| |
| // Check current state to determine transition state |
| if (pwrState == PWR_ACT_PDN) { |
| // banks still open, transition to PWR_ACT |
| schedulePowerEvent(PWR_ACT, curTick()); |
| } else { |
| // transitioning from a precharge power-down or self-refresh state |
| // banks are closed - transition to PWR_IDLE |
| schedulePowerEvent(PWR_IDLE, curTick()); |
| } |
| } |
| |
| void |
| DRAMInterface::Rank::processPowerEvent() |
| { |
| assert(curTick() >= pwrStateTick); |
| // remember where we were, and for how long |
| Tick duration = curTick() - pwrStateTick; |
| PowerState prev_state = pwrState; |
| |
| // update the accounting |
| stats.pwrStateTime[prev_state] += duration; |
| |
| // track to total idle time |
| if ((prev_state == PWR_PRE_PDN) || (prev_state == PWR_ACT_PDN) || |
| (prev_state == PWR_SREF)) { |
| stats.totalIdleTime += duration; |
| } |
| |
| pwrState = pwrStateTrans; |
| pwrStateTick = curTick(); |
| |
| // if rank was refreshing, make sure to start scheduling requests again |
| if (prev_state == PWR_REF) { |
| // bus IDLED prior to REF |
| // counter should be one for refresh command only |
| assert(outstandingEvents == 1); |
| // REF complete, decrement count and go back to IDLE |
| --outstandingEvents; |
| refreshState = REF_IDLE; |
| |
| DPRINTF(DRAMState, "Was refreshing for %llu ticks\n", duration); |
| // if moving back to power-down after refresh |
| if (pwrState != PWR_IDLE) { |
| assert(pwrState == PWR_PRE_PDN); |
| DPRINTF(DRAMState, "Switching to power down state after refreshing" |
| " rank %d at %llu tick\n", rank, curTick()); |
| } |
| |
| // completed refresh event, ensure next request is scheduled |
| if (!(dram.ctrl->requestEventScheduled(dram.pseudoChannel))) { |
| DPRINTF(DRAM, "Scheduling next request after refreshing" |
| " rank %d, PC %d \n", rank, dram.pseudoChannel); |
| dram.ctrl->restartScheduler(curTick(), dram.pseudoChannel); |
| } |
| } |
| |
| if ((pwrState == PWR_ACT) && (refreshState == REF_PD_EXIT)) { |
| // have exited ACT PD |
| assert(prev_state == PWR_ACT_PDN); |
| |
| // go back to REF event and close banks |
| refreshState = REF_PRE; |
| schedule(refreshEvent, curTick()); |
| } else if (pwrState == PWR_IDLE) { |
| DPRINTF(DRAMState, "All banks precharged\n"); |
| if (prev_state == PWR_SREF) { |
| // set refresh state to REF_SREF_EXIT, ensuring inRefIdleState |
| // continues to return false during tXS after SREF exit |
| // Schedule a refresh which kicks things back into action |
| // when it finishes |
| refreshState = REF_SREF_EXIT; |
| schedule(refreshEvent, curTick() + dram.tXS); |
| } else { |
| // if we have a pending refresh, and are now moving to |
| // the idle state, directly transition to, or schedule refresh |
| if ((refreshState == REF_PRE) || (refreshState == REF_PD_EXIT)) { |
| // ensure refresh is restarted only after final PRE command. |
| // do not restart refresh if controller is in an intermediate |
| // state, after PRE_PDN exit, when banks are IDLE but an |
| // ACT is scheduled. |
| if (!activateEvent.scheduled()) { |
| // there should be nothing waiting at this point |
| assert(!powerEvent.scheduled()); |
| if (refreshState == REF_PD_EXIT) { |
| // exiting PRE PD, will be in IDLE until tXP expires |
| // and then should transition to PWR_REF state |
| assert(prev_state == PWR_PRE_PDN); |
| schedulePowerEvent(PWR_REF, curTick() + dram.tXP); |
| } else if (refreshState == REF_PRE) { |
| // can directly move to PWR_REF state and proceed below |
| pwrState = PWR_REF; |
| } |
| } else { |
| // must have PRE scheduled to transition back to IDLE |
| // and re-kick off refresh |
| assert(prechargeEvent.scheduled()); |
| } |
| } |
| } |
| } |
| |
| // transition to the refresh state and re-start refresh process |
| // refresh state machine will schedule the next power state transition |
| if (pwrState == PWR_REF) { |
| // completed final PRE for refresh or exiting power-down |
| assert(refreshState == REF_PRE || refreshState == REF_PD_EXIT); |
| |
| // exited PRE PD for refresh, with no pending commands |
| // bypass auto-refresh and go straight to SREF, where memory |
| // will issue refresh immediately upon entry |
| if (pwrStatePostRefresh == PWR_PRE_PDN && isQueueEmpty() && |
| (dram.ctrl->drainState() != DrainState::Draining) && |
| (dram.ctrl->drainState() != DrainState::Drained) && |
| dram.enableDRAMPowerdown) { |
| DPRINTF(DRAMState, "Rank %d bypassing refresh and transitioning " |
| "to self refresh at %11u tick\n", rank, curTick()); |
| powerDownSleep(PWR_SREF, curTick()); |
| |
| // Since refresh was bypassed, remove event by decrementing count |
| assert(outstandingEvents == 1); |
| --outstandingEvents; |
| |
| // reset state back to IDLE temporarily until SREF is entered |
| pwrState = PWR_IDLE; |
| |
| // Not bypassing refresh for SREF entry |
| } else { |
| DPRINTF(DRAMState, "Refreshing\n"); |
| |
| // there should be nothing waiting at this point |
| assert(!powerEvent.scheduled()); |
| |
| // kick the refresh event loop into action again, and that |
| // in turn will schedule a transition to the idle power |
| // state once the refresh is done |
| schedule(refreshEvent, curTick()); |
| |
| // Banks transitioned to IDLE, start REF |
| refreshState = REF_START; |
| } |
| } |
| |
| } |
| |
| void |
| DRAMInterface::Rank::updatePowerStats() |
| { |
| // All commands up to refresh have completed |
| // flush cmdList to DRAMPower |
| flushCmdList(); |
| |
| // Call the function that calculates window energy at intermediate update |
| // events like at refresh, stats dump as well as at simulation exit. |
| // Window starts at the last time the calcWindowEnergy function was called |
| // and is upto current time. |
| power.powerlib.calcWindowEnergy(divCeil(curTick(), dram.tCK) - |
| dram.timeStampOffset); |
| |
| // Get the energy from DRAMPower |
| Data::MemoryPowerModel::Energy energy = power.powerlib.getEnergy(); |
| |
| // The energy components inside the power lib are calculated over |
| // the window so accumulate into the corresponding gem5 stat |
| stats.actEnergy += energy.act_energy * dram.devicesPerRank; |
| stats.preEnergy += energy.pre_energy * dram.devicesPerRank; |
| stats.readEnergy += energy.read_energy * dram.devicesPerRank; |
| stats.writeEnergy += energy.write_energy * dram.devicesPerRank; |
| stats.refreshEnergy += energy.ref_energy * dram.devicesPerRank; |
| stats.actBackEnergy += energy.act_stdby_energy * dram.devicesPerRank; |
| stats.preBackEnergy += energy.pre_stdby_energy * dram.devicesPerRank; |
| stats.actPowerDownEnergy += energy.f_act_pd_energy * dram.devicesPerRank; |
| stats.prePowerDownEnergy += energy.f_pre_pd_energy * dram.devicesPerRank; |
| stats.selfRefreshEnergy += energy.sref_energy * dram.devicesPerRank; |
| |
| // Accumulate window energy into the total energy. |
| stats.totalEnergy += energy.window_energy * dram.devicesPerRank; |
| // Average power must not be accumulated but calculated over the time |
| // since last stats reset. sim_clock::Frequency is tick period not tick |
| // frequency. |
| // energy (pJ) 1e-9 |
| // power (mW) = ----------- * ---------- |
| // time (tick) tick_frequency |
| stats.averagePower = (stats.totalEnergy.value() / |
| (curTick() - dram.lastStatsResetTick)) * |
| (sim_clock::Frequency / 1000000000.0); |
| } |
| |
| void |
| DRAMInterface::Rank::computeStats() |
| { |
| DPRINTF(DRAM,"Computing stats due to a dump callback\n"); |
| |
| // Update the stats |
| updatePowerStats(); |
| |
| // final update of power state times |
| stats.pwrStateTime[pwrState] += (curTick() - pwrStateTick); |
| pwrStateTick = curTick(); |
| } |
| |
| void |
| DRAMInterface::Rank::resetStats() { |
| // The only way to clear the counters in DRAMPower is to call |
| // calcWindowEnergy function as that then calls clearCounters. The |
| // clearCounters method itself is private. |
| power.powerlib.calcWindowEnergy(divCeil(curTick(), dram.tCK) - |
| dram.timeStampOffset); |
| |
| } |
| |
| bool |
| DRAMInterface::Rank::forceSelfRefreshExit() const { |
| return (readEntries != 0) || |
| (dram.ctrl->inWriteBusState(true, &(this->dram)) |
| && (writeEntries != 0)); |
| } |
| |
| void |
| DRAMInterface::DRAMStats::resetStats() |
| { |
| dram.lastStatsResetTick = curTick(); |
| } |
| |
| DRAMInterface::DRAMStats::DRAMStats(DRAMInterface &_dram) |
| : statistics::Group(&_dram), |
| dram(_dram), |
| |
| ADD_STAT(readBursts, statistics::units::Count::get(), |
| "Number of DRAM read bursts"), |
| ADD_STAT(writeBursts, statistics::units::Count::get(), |
| "Number of DRAM write bursts"), |
| |
| ADD_STAT(perBankRdBursts, statistics::units::Count::get(), |
| "Per bank write bursts"), |
| ADD_STAT(perBankWrBursts, statistics::units::Count::get(), |
| "Per bank write bursts"), |
| |
| ADD_STAT(totQLat, statistics::units::Tick::get(), |
| "Total ticks spent queuing"), |
| ADD_STAT(totBusLat, statistics::units::Tick::get(), |
| "Total ticks spent in databus transfers"), |
| ADD_STAT(totMemAccLat, statistics::units::Tick::get(), |
| "Total ticks spent from burst creation until serviced " |
| "by the DRAM"), |
| |
| ADD_STAT(avgQLat, statistics::units::Rate< |
| statistics::units::Tick, statistics::units::Count>::get(), |
| "Average queueing delay per DRAM burst"), |
| ADD_STAT(avgBusLat, statistics::units::Rate< |
| statistics::units::Tick, statistics::units::Count>::get(), |
| "Average bus latency per DRAM burst"), |
| ADD_STAT(avgMemAccLat, statistics::units::Rate< |
| statistics::units::Tick, statistics::units::Count>::get(), |
| "Average memory access latency per DRAM burst"), |
| |
| ADD_STAT(readRowHits, statistics::units::Count::get(), |
| "Number of row buffer hits during reads"), |
| ADD_STAT(writeRowHits, statistics::units::Count::get(), |
| "Number of row buffer hits during writes"), |
| ADD_STAT(readRowHitRate, statistics::units::Ratio::get(), |
| "Row buffer hit rate for reads"), |
| ADD_STAT(writeRowHitRate, statistics::units::Ratio::get(), |
| "Row buffer hit rate for writes"), |
| |
| ADD_STAT(bytesPerActivate, statistics::units::Byte::get(), |
| "Bytes accessed per row activation"), |
| ADD_STAT(bytesRead, statistics::units::Byte::get(), |
| "Total bytes read"), |
| ADD_STAT(bytesWritten, statistics::units::Byte::get(), |
| "Total bytes written"), |
| |
| ADD_STAT(avgRdBW, statistics::units::Rate< |
| statistics::units::Byte, statistics::units::Second>::get(), |
| "Average DRAM read bandwidth in MiBytes/s"), |
| ADD_STAT(avgWrBW, statistics::units::Rate< |
| statistics::units::Byte, statistics::units::Second>::get(), |
| "Average DRAM write bandwidth in MiBytes/s"), |
| ADD_STAT(peakBW, statistics::units::Rate< |
| statistics::units::Byte, statistics::units::Second>::get(), |
| "Theoretical peak bandwidth in MiByte/s"), |
| |
| ADD_STAT(busUtil, statistics::units::Ratio::get(), |
| "Data bus utilization in percentage"), |
| ADD_STAT(busUtilRead, statistics::units::Ratio::get(), |
| "Data bus utilization in percentage for reads"), |
| ADD_STAT(busUtilWrite, statistics::units::Ratio::get(), |
| "Data bus utilization in percentage for writes"), |
| |
| ADD_STAT(pageHitRate, statistics::units::Ratio::get(), |
| "Row buffer hit rate, read and write combined") |
| |
| { |
| } |
| |
| void |
| DRAMInterface::DRAMStats::regStats() |
| { |
| using namespace statistics; |
| |
| avgQLat.precision(2); |
| avgBusLat.precision(2); |
| avgMemAccLat.precision(2); |
| |
| readRowHitRate.precision(2); |
| writeRowHitRate.precision(2); |
| |
| perBankRdBursts.init(dram.banksPerRank * dram.ranksPerChannel); |
| perBankWrBursts.init(dram.banksPerRank * dram.ranksPerChannel); |
| |
| bytesPerActivate |
| .init(dram.maxAccessesPerRow ? |
| dram.maxAccessesPerRow : dram.rowBufferSize) |
| .flags(nozero); |
| |
| peakBW.precision(2); |
| busUtil.precision(2); |
| busUtilWrite.precision(2); |
| busUtilRead.precision(2); |
| |
| pageHitRate.precision(2); |
| |
| // Formula stats |
| avgQLat = totQLat / readBursts; |
| avgBusLat = totBusLat / readBursts; |
| avgMemAccLat = totMemAccLat / readBursts; |
| |
| readRowHitRate = (readRowHits / readBursts) * 100; |
| writeRowHitRate = (writeRowHits / writeBursts) * 100; |
| |
| avgRdBW = (bytesRead / 1000000) / simSeconds; |
| avgWrBW = (bytesWritten / 1000000) / simSeconds; |
| peakBW = (sim_clock::Frequency / dram.burstDelay()) * |
| dram.bytesPerBurst() / 1000000; |
| |
| busUtil = (avgRdBW + avgWrBW) / peakBW * 100; |
| busUtilRead = avgRdBW / peakBW * 100; |
| busUtilWrite = avgWrBW / peakBW * 100; |
| |
| pageHitRate = (writeRowHits + readRowHits) / |
| (writeBursts + readBursts) * 100; |
| } |
| |
| DRAMInterface::RankStats::RankStats(DRAMInterface &_dram, Rank &_rank) |
| : statistics::Group(&_dram, csprintf("rank%d", _rank.rank).c_str()), |
| rank(_rank), |
| |
| ADD_STAT(actEnergy, statistics::units::Joule::get(), |
| "Energy for activate commands per rank (pJ)"), |
| ADD_STAT(preEnergy, statistics::units::Joule::get(), |
| "Energy for precharge commands per rank (pJ)"), |
| ADD_STAT(readEnergy, statistics::units::Joule::get(), |
| "Energy for read commands per rank (pJ)"), |
| ADD_STAT(writeEnergy, statistics::units::Joule::get(), |
| "Energy for write commands per rank (pJ)"), |
| ADD_STAT(refreshEnergy, statistics::units::Joule::get(), |
| "Energy for refresh commands per rank (pJ)"), |
| ADD_STAT(actBackEnergy, statistics::units::Joule::get(), |
| "Energy for active background per rank (pJ)"), |
| ADD_STAT(preBackEnergy, statistics::units::Joule::get(), |
| "Energy for precharge background per rank (pJ)"), |
| ADD_STAT(actPowerDownEnergy, statistics::units::Joule::get(), |
| "Energy for active power-down per rank (pJ)"), |
| ADD_STAT(prePowerDownEnergy, statistics::units::Joule::get(), |
| "Energy for precharge power-down per rank (pJ)"), |
| ADD_STAT(selfRefreshEnergy, statistics::units::Joule::get(), |
| "Energy for self refresh per rank (pJ)"), |
| |
| ADD_STAT(totalEnergy, statistics::units::Joule::get(), |
| "Total energy per rank (pJ)"), |
| ADD_STAT(averagePower, statistics::units::Watt::get(), |
| "Core power per rank (mW)"), |
| |
| ADD_STAT(totalIdleTime, statistics::units::Tick::get(), |
| "Total Idle time Per DRAM Rank"), |
| ADD_STAT(pwrStateTime, statistics::units::Tick::get(), |
| "Time in different power states") |
| { |
| } |
| |
| void |
| DRAMInterface::RankStats::regStats() |
| { |
| statistics::Group::regStats(); |
| |
| pwrStateTime |
| .init(6) |
| .subname(0, "IDLE") |
| .subname(1, "REF") |
| .subname(2, "SREF") |
| .subname(3, "PRE_PDN") |
| .subname(4, "ACT") |
| .subname(5, "ACT_PDN"); |
| } |
| |
| void |
| DRAMInterface::RankStats::resetStats() |
| { |
| statistics::Group::resetStats(); |
| |
| rank.resetStats(); |
| } |
| |
| void |
| DRAMInterface::RankStats::preDumpStats() |
| { |
| statistics::Group::preDumpStats(); |
| |
| rank.computeStats(); |
| } |
| |
| } // namespace memory |
| } // namespace gem5 |