blob: a6d7fcb7d6180515a103cb3e0e5de1d906426326 [file] [log] [blame]
# -*- coding: utf-8 -*-
# Copyright (c) 2016 Jason Lowe-Power
# All rights reserved.
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions are
# met: redistributions of source code must retain the above copyright
# notice, this list of conditions and the following disclaimer;
# redistributions in binary form must reproduce the above copyright
# notice, this list of conditions and the following disclaimer in the
# documentation and/or other materials provided with the distribution;
# neither the name of the copyright holders nor the names of its
# contributors may be used to endorse or promote products derived from
# this software without specific prior written permission.
#
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
#
# Authors: Jason Lowe-Power
import m5
from m5.objects import *
from .fs_tools import *
class MyRubySystem(System):
def __init__(self, kernel, disk, mem_sys, num_cpus, opts):
super(MyRubySystem, self).__init__()
self._opts = opts
self._host_parallel = True
# Set up the clock domain and the voltage domain
self.clk_domain = SrcClockDomain()
self.clk_domain.clock = '3GHz'
self.clk_domain.voltage_domain = VoltageDomain()
self.mem_ranges = [AddrRange(Addr('3GB')), # All data
AddrRange(0xC0000000, size=0x100000), # For I/0
]
self.initFS(num_cpus)
# Replace these paths with the path to your disk images.
# The first disk is the root disk. The second could be used for swap
# or anything else.
self.setDiskImages(disk, disk)
# Change this path to point to the kernel you want to use
self.workload.object_file = kernel
# Options specified on the kernel command line
boot_options = ['earlyprintk=ttyS0', 'console=ttyS0', 'lpj=7999923',
'root=/dev/hda1']
self.workload.command_line = ' '.join(boot_options)
# Create the CPUs for our system.
self.createCPU(num_cpus)
self.createMemoryControllersDDR3()
# Create the cache hierarchy for the system.
if mem_sys == 'MI_example':
from .MI_example_caches import MIExampleSystem
self.caches = MIExampleSystem()
elif mem_sys == 'MESI_Two_Level':
from .MESI_Two_Level import MESITwoLevelCache
self.caches = MESITwoLevelCache()
elif mem_sys == 'MOESI_CMP_directory':
from .MOESI_CMP_directory import MOESICMPDirCache
self.caches = MOESICMPDirCache()
self.caches.setup(self, self.cpu, self.mem_cntrls,
[self.pc.south_bridge.ide.dma,
self.iobus.mem_side_ports],
self.iobus)
if self._host_parallel:
# To get the KVM CPUs to run on different host CPUs
# Specify a different event queue for each CPU
for i,cpu in enumerate(self.cpu):
for obj in cpu.descendants():
obj.eventq_index = 0
# the number of eventqs are set based
# on experiments with few benchmarks
cpu.eventq_index = i + 1
def getHostParallel(self):
return self._host_parallel
def totalInsts(self):
return sum([cpu.totalInsts() for cpu in self.cpu])
def createCPUThreads(self, cpu):
for c in cpu:
c.createThreads()
def createCPU(self, num_cpus):
# Note KVM needs a VM and atomic_noncaching
self.cpu = [X86KvmCPU(cpu_id = i)
for i in range(num_cpus)]
self.kvm_vm = KvmVM()
self.mem_mode = 'atomic_noncaching'
self.createCPUThreads(self.cpu)
self.atomicCpu = [AtomicSimpleCPU(cpu_id = i,
switched_out = True)
for i in range(num_cpus)]
self.createCPUThreads(self.atomicCpu)
self.timingCpu = [TimingSimpleCPU(cpu_id = i,
switched_out = True)
for i in range(num_cpus)]
self.createCPUThreads(self.timingCpu)
def switchCpus(self, old, new):
assert(new[0].switchedOut())
m5.switchCpus(self, list(zip(old, new)))
def setDiskImages(self, img_path_1, img_path_2):
disk0 = CowDisk(img_path_1)
disk2 = CowDisk(img_path_2)
self.pc.south_bridge.ide.disks = [disk0, disk2]
def createMemoryControllersDDR3(self):
self._createMemoryControllers(1, DDR3_1600_8x8)
def _createMemoryControllers(self, num, cls):
self.mem_cntrls = [
MemCtrl(dram = cls(range = self.mem_ranges[0]))
for i in range(num)
]
def initFS(self, cpus):
self.pc = Pc()
self.workload = X86FsLinux()
# North Bridge
self.iobus = IOXBar()
# connect the io bus
# Note: pass in a reference to where Ruby will connect to in the future
# so the port isn't connected twice.
self.pc.attachIO(self.iobus, [self.pc.south_bridge.ide.dma])
###############################################
# Add in a Bios information structure.
self.workload.smbios_table.structures = [X86SMBiosBiosInformation()]
# Set up the Intel MP table
base_entries = []
ext_entries = []
for i in range(cpus):
bp = X86IntelMPProcessor(
local_apic_id = i,
local_apic_version = 0x14,
enable = True,
bootstrap = (i ==0))
base_entries.append(bp)
io_apic = X86IntelMPIOAPIC(
id = cpus,
version = 0x11,
enable = True,
address = 0xfec00000)
self.pc.south_bridge.io_apic.apic_id = io_apic.id
base_entries.append(io_apic)
pci_bus = X86IntelMPBus(bus_id = 0, bus_type='PCI ')
base_entries.append(pci_bus)
isa_bus = X86IntelMPBus(bus_id = 1, bus_type='ISA ')
base_entries.append(isa_bus)
connect_busses = X86IntelMPBusHierarchy(bus_id=1,
subtractive_decode=True, parent_bus=0)
ext_entries.append(connect_busses)
pci_dev4_inta = X86IntelMPIOIntAssignment(
interrupt_type = 'INT',
polarity = 'ConformPolarity',
trigger = 'ConformTrigger',
source_bus_id = 0,
source_bus_irq = 0 + (4 << 2),
dest_io_apic_id = io_apic.id,
dest_io_apic_intin = 16)
base_entries.append(pci_dev4_inta)
def assignISAInt(irq, apicPin):
assign_8259_to_apic = X86IntelMPIOIntAssignment(
interrupt_type = 'ExtInt',
polarity = 'ConformPolarity',
trigger = 'ConformTrigger',
source_bus_id = 1,
source_bus_irq = irq,
dest_io_apic_id = io_apic.id,
dest_io_apic_intin = 0)
base_entries.append(assign_8259_to_apic)
assign_to_apic = X86IntelMPIOIntAssignment(
interrupt_type = 'INT',
polarity = 'ConformPolarity',
trigger = 'ConformTrigger',
source_bus_id = 1,
source_bus_irq = irq,
dest_io_apic_id = io_apic.id,
dest_io_apic_intin = apicPin)
base_entries.append(assign_to_apic)
assignISAInt(0, 2)
assignISAInt(1, 1)
for i in range(3, 15):
assignISAInt(i, i)
self.workload.intel_mp_table.base_entries = base_entries
self.workload.intel_mp_table.ext_entries = ext_entries
entries = \
[
# Mark the first megabyte of memory as reserved
X86E820Entry(addr = 0, size = '639kB', range_type = 1),
X86E820Entry(addr = 0x9fc00, size = '385kB', range_type = 2),
# Mark the rest of physical memory as available
X86E820Entry(addr = 0x100000,
size = '%dB' % (self.mem_ranges[0].size() - 0x100000),
range_type = 1),
]
# Reserve the last 16kB of the 32-bit address space for m5ops
entries.append(X86E820Entry(addr = 0xFFFF0000, size = '64kB',
range_type=2))
self.workload.e820_table.entries = entries